Toshiba B-SP2D owner manual Installing the Printer

Page 26

4. INSTALLING THE PRINTER

EO1-33038

4.2 INSTALLING THE MEDIA GUIDE

NOTE: When using a 55 mm wide media roll, attach the media guides to both edges of the media holder.

When using a meida roll which is narrower than 55 mm, move only the media guide on the printer's bottom side (opposite side to the operation panel). The position of the media guide of the operation panel side is fixed.

3) To remove the media guide, first unhook side (1), and then (2).

Media Guide

(1)

(2)

Media Holder

4- 4

Image 26

Contents SP2D Series CE Compliance for EU only VorsichtTrade Mark For all countries and areasFor USA Precaution in use TEC-BTM SpecificationSafety Summary Safety PrecautionsSafety Precautions Safety Precautions Precautions Safety Precautions Table of Contents Connecting the Serial Interface Cable Introduction P 2 D G H 2 0 -Q M AccessoriesApplicable Model Specifications PrinterBluetooth Interface Serial Interface RS-232CWireless LAN Interface Battery Media Label Tag/Receipt Feed direction Black Mark on reverse sideWidth 49, 52, 55, 58 ±0.5 Note Media width 25.0 − 55.0 Note Appearance Front ViewInterior Status Indicator Red/Orange/GreenPower Button Operation PanelInstalling the Printer Loading the BatteryPicture Installing the Media Guide Installing the Printer Installing the Media Guide for Outside Wound Paper Loading the Media Batch issue Strip issue Securing the Printer to Your Waist Connecting the Serial Interface Cable GH20 model only Connecting the Serial Interface Cable Issuing the Media ESS-ID IrDA Communication Sample Issuing the Media CARE/HANDLING of the Media General Maintenance CleaningElement Covers Removing Jammed MediaTroubleshooting Cause Corrective action Turn on the power Interface cable One minute after power Other problems Cause Corrective action Wireless LAN Release catches are not Page EO1-33038C