Toshiba B-SP2D owner manual Cause Corrective action

11. TROUBLESHOOTING					EO1-33038
					11. TROUBLESHOOTING
Status	Cause			Corrective action
Indicator
	There is insufficient			Open the media cover and close it
Blinks in	area in the flash ROM.			again. Erase the data.
Red	The print mode is not			Open the media cover and close it
	selected correctly.			again. Send the correct print mode
				from the PC or handy terminal.
Lights	The battery voltage is			Turn off the printer and replace the
in Red	low.			battery with a fully charged one.
Lights	The battery is nearly			Replace the battery with a fully charged
in	end.			one as soon as possible.
Orange
Blinks	The printer is printing			Wait until the printer finishes printing or
in	or communicating with			communicating.
Green	the PC or handy
or	terminal.
Orange
Lights	The power is on.			This is not a failure or an error.
in
Green
Other problems			Cause		Corrective action
The printer power does		The battery pack is not			Load a fully charged
not turn on by pressing		loaded.			battery pack.
the power switch.
In spite of using a fully		The battery life is			Replace the battery with a
charged battery, it does		expired.			new one which has been
not last long.					fully charged.
			11- 2