Toshiba VF-MB1/S15 instruction manual Profile, Telegram

Page 11

E6581738

3. Profile

3.1.Telegram

Telegram of PDP003Z is set up by the configurator.

The figures below show the Telegrams and configurations that the PDP003Z supports.

 

 

PKW

 

 

PZD

 

 

 

 

PZD1

PZD2

 

PKE

IND

PWE

STW

HSW PZD3 PZD4 PZD5 PZD6

 

 

 

 

ZSW

HIW

 

 

 

 

 

 

 

 

Telegram 1: PROFIdrive (PPO TYPE 3, 2PZD)

Telegram 100: Vendor Spec. (PPO TYPE 1, 4PKW / 2PZD)

Telegram 101: Vendor Spec. (PPO TYPE 2, 4PKW / 6PZD)

Telegram 102: Vendor Spec. (PPO TYPE 4, 6 ZD)

PKW:

Parameter ID/value

PZD:

Process Data, cyclically transferred

PKE:

Parameter ID (1st and 2nd octet)

IND:

Sub-index (3rd octet), 4th octet is reserved

PWE:

Parameter value (5th until 8th octet)

STW:

Control word

HSW:

Main setpoint

ZSW:

Status word

HIW:

Main actual value

*There are some by which a high byte / low byte is conversely treated depending on a master.

- 9 -

Image 11
Contents Tosvert VF-MB1/S15 Contents Introduction Safety precautions E6581738 E6581738 E6581738 Connection Information Exterior featuresDX Data exchange Green LED Status indicatorVF-MB1/S15 Communication parameters Telegram ProfileSTW Control Word Data PDP003Z supports only speed control mode Bit Value NameBit Valure Name ZSW Status Word DataZSW Bit Setpoint Actual value15s 20s 25s 30s TmaxState Machine Example 1 Hz Forward running and Deceleration stop AK Request from Master to PDP003Z) Access to the Profibus parameterProfibus parameter PNU Value Mode13 9A Example 1. Reading the PNU 922 TelegramAccess to VF-MB1/S15 parameter Response Value 0x03E8 = 1000 10.00Hz Vendor Spec. Profile Profibus Master How to useBit Function Overview of the VF-MB1/S15 parameter2. fa23 Communication command Specified data output ST=ON ST=OFF E6581738 RES RY-RC Diagnostic VF-MB1/S15 DP-V1 functionMaster Profibs DP-V1 CommunicationExample1. Read the PROFIdrive parameter 0x82 Example 2. Change the PROFIdrive parameter0x02 0x9F0x31 Example 3. Read the VF-MB1/S15 parameter0xE8 0xFD0x07 Example 4. Change the VF-MB1/S15 parameter0x30 GSD file Profibus Local/Remote OperationFunction number Appendix