Toshiba VF-MB1/S15 instruction manual Res

E6581738

4.2.12.fc91 (Alarm code)

bit

Function

0

1

Remarks

(Code displayed on

the panel)

0	Over-current alarm	Normal	Alarming	c flicking
1	Inverter over load alarm	Normal	Alarming	l flicking
2	Motor over load alarm	Normal	Alarming	l flicking
3	Over heat alarm	Normal	Alarming	h flicking
4	Over voltage alarm	Normal	Alarming	p flicking
5	Main circuit undervoltage alarm	Normal	Alarming	-
6	main device overheat alarm	Normal	Alarming	l flicking
7	Under current alarm	Normal	Alarming	-
8	Over-torque alarm	Normal	Alarming	-
9	Braking resistor overload alarm	Normal	Alarming	-
10	Cumulative operation hours alarm	Normal	Alarming	-
11	Option communication alarm	Normal	Alarming	-
12	Serial communication alarm	Normal	Alarming	-
13	MOFFMS (MSrelay off or MOFF)	Normal	Alarming	-
14	Stop after instantaneous power off	-	Dec., Under	Refer to f302
			stop	value
15	Stop after LL continuance time	-	Dec., Under	Refer to f256
			stop	value

4.2.13.fd06 (Input TB Status)

bit TB Name Function (Parameter) 0 1

0F Input terminal function selection 1 (f111)

1R Input terminal function selection 2 (f112)

2	RES	Input terminal function selection 3 (f113)
3	S1	Input terminal function selection 4 (f114)	OFF	ON
4	S2	Input terminal function selection 5 (f115)
5	S3	Input terminal function selection 6 (f116)
6	VIB*1	Input terminal function selection 7 (f117)
7	VIA*1	Input terminal function selection 8 (f118)
5 to 15	(Undefined)	-	-	-

Note: The bit described "Undefined" is unstable. Do not use the bit for the judgment.

*1: VIA/ VIB are input terminal function when f109 is logic input. *The input terminal function is selected by each parameter.

- 27 -