Toshiba instruction manual Overview of the VF-MB1/S15 parameter, Bit Function

E6581738

4.2.The overview of the VF-MB1/S15 parameter

Refer to a communication functional description (E6581726/E6581913) for details.

4.2.1.fa06 (Communication command1)

bit	Function	0	1	Note
	Preset speed
0	operation frequencies	Preset speed operation is disabled
	1
	Preset speed	or preset speed operation
1	operation frequencies	frequencies (1-15) are set by
	2	specifying bits for preset speed
	Preset speed	operation frequencies 1-4.
2	operation frequencies	(0000: Preset speed operation OFF,
	3	001-1111: Setting of preset speed
	Preset speed	operation frequencies (1-15)

3operation frequencies 4

	4	Motor selection (1 or 2)	Motor 1	Motor 2	THR 1: pt = setting value, thr
					THR 2: pt = 0, f170,
		(THR 2 selection)	(THR 1)	(THR 2)
					f171, f172, f173
5		PI D control	Normal operation	PI D off	-
		Acceleration/decele-	Acceleration/decel	Acceleration/dec
6		ration pattern selection	eration pattern 1	eleration pattern	AD1: acc, dec
		(1 or 2)	(AD1)	2	AD2: f500, f501
		(AD2 selection)		(AD2)
7		DC braking	OFF	Forced DC	-
				braking
	8	Jog run	OFF	Jog run	-
9		Forward/reverse run	Forward run	Reverse run	-
		selection
10		Run/stop	Stop	Run	-
11		Coast stop command	Standby	Cost stop	-
	12	Emergency stop	OFF	Emergency stop	Always enable, "E" trip
13		Fault reset	OFF	Reset	No data is returned from the drive
14		Frequency priority	OFF	Enabled	Enabled regardless of the setting
		selection			of fmod
15		Command priority	OFF	Enabled	Enabled regardless of the setting
		selection			of cmod
* VF-S15:When 14(sr0) is set to fmod, preset speed operation frequency 0 is selected.

- 22 -