Toshiba VF-MB1/S15 instruction manual Ry-Rc

Page 30

E6581738

4.2.14.fd07 (Output TB Status)

bit

TB Name

Function (Parameter)

0

1

0	RY-RC	Output terminal function selection 1A (f130)		OFF
1	OUT	Output TB Function select	2A (f131)	OFF
2	FL	Output TB Function select	3 (f132)	OFF
3 - 15	(Undefined)	-		-

Note: The bit described "Undefined" is unstable. Do not use the bit for the judgment.

ON ON ON

-

- 28 -

Image 30

Contents Tosvert VF-MB1/S15 Contents Introduction Safety precautions E6581738 E6581738 E6581738 Exterior features Connection InformationStatus indicator DX Data exchange Green LEDVF-MB1/S15 Communication parameters Profile TelegramPDP003Z supports only speed control mode Bit Value Name STW Control Word DataZSW Status Word Data Bit Valure NameTmax Setpoint Actual value15s 20s 25s 30s ZSW BitState Machine Example 1 Hz Forward running and Deceleration stop Access to the Profibus parameter AK Request from Master to PDP003Z）Value Mode Profibus parameter PNUExample 1. Reading the PNU 922 Telegram 13 9AAccess to VF-MB1/S15 parameter Response Value 0x03E8 = 1000 10.00Hz Vendor Spec. Profile How to use Profibus MasterOverview of the VF-MB1/S15 parameter Bit Function2. fa23 Communication command Specified data output ST=ON ST=OFF E6581738 RES RY-RC Diagnostic Profibs DP-V1 Communication DP-V1 functionMaster VF-MB1/S15Example1. Read the PROFIdrive parameter 0x9F Example 2. Change the PROFIdrive parameter0x02 0x820xFD Example 3. Read the VF-MB1/S15 parameter0xE8 0x31Example 4. Change the VF-MB1/S15 parameter 0x300x07 Profibus Local/Remote Operation GSD fileAppendix Function number