Toshiba VF-MB1/S15 instruction manual Introduction

Page 3

E6581738

1. Introduction

Thank you for purchasing the PROFIBUS-DP option “PDP003Z” for the VF-MB1/S15. Before using the PROFIBUS-DP option, please familiarize yourself with the product and be sure to thoroughly read the instructions and precautions contained in this manual. This option needs the option adaptor to connect VF-S15 which type form is SBP009Z. Please match here and buy it when SBP009Z is not at hand yet.

In addition, please make sure that this manual and “Installation Manual” is delivered to the customer, and keep this function manual in a safe place for future reference or drive/interface inspection.

This manual describes the supported functions for the “PDP003Z”.

In conjunction with this manual, the following manuals are supplied by Toshiba, and they are essential both for ensuring a safe, reliable system installation as well as for realizing the full potential of the “PDP003Z”:

- TOSVERT VF-MB1 Instruction Manual

E6581697

- TOSVERT VF-S15 Instruction Manual

E6581611

- TOSVERT VF-MB1/S15 communication option Precautions Manual· E6581739

- 1 -

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Tosvert VF-MB1/S15 Contents Introduction Safety precautions E6581738 E6581738 E6581738 Connection Information Exterior featuresDX Data exchange Green LED Status indicatorVF-MB1/S15 Communication parameters Telegram ProfileSTW Control Word Data PDP003Z supports only speed control mode Bit Value NameBit Valure Name ZSW Status Word DataZSW Bit Setpoint Actual value15s 20s 25s 30s TmaxState Machine Example 1 Hz Forward running and Deceleration stop AK Request from Master to PDP003Z） Access to the Profibus parameterProfibus parameter PNU Value Mode13 9A Example 1. Reading the PNU 922 TelegramAccess to VF-MB1/S15 parameter Response Value 0x03E8 = 1000 10.00Hz Vendor Spec. Profile Profibus Master How to useBit Function Overview of the VF-MB1/S15 parameter2. fa23 Communication command Specified data output ST=ON ST=OFF E6581738 RES RY-RC Diagnostic VF-MB1/S15 DP-V1 functionMaster Profibs DP-V1 CommunicationExample1. Read the PROFIdrive parameter 0x82 Example 2. Change the PROFIdrive parameter0x02 0x9F0x31 Example 3. Read the VF-MB1/S15 parameter0xE8 0xFDExample 4. Change the VF-MB1/S15 parameter 0x300x07 GSD file Profibus Local/Remote OperationFunction number Appendix
Top Page Image Contents