Toshiba VF-MB1/S15 instruction manual Status indicator, DX Data exchange Green LED

Page 9

E6581738

2.2.Status indicator

The PDP003Z has two LEDs, ST (status) and DX (data exchange) to indicate the statuses of PROFIBUS-DP and the PDP003Z itself.

ST (status)

DX (data Exchange)

ST (Status): Red LED

	LED	Meanings
	Off	No diagnostics present
		8 Hz (Blinking 4 times/1sec.):
		Waiting for parameterization or configuration
	Flashes	2 Hz (Blinking 1 times/1sec.):
		PDP003Z station address is "126".
		(Refer to 2.3 section .)
	Lights	DP status error
	Lights	* For example, a station address is not setcorrectly.
		* For example, a station address is not setcorrectly.

DX (Data exchange): Green LED.

Indicates the status of the PROFIBUS network.

It lights when the PDP003Z is on-line and data exchange is possible.

- 7 -

Image 9

Contents Tosvert VF-MB1/S15 Contents Introduction Safety precautions E6581738 E6581738 E6581738 Connection Information Exterior featuresDX Data exchange Green LED Status indicatorVF-MB1/S15 Communication parameters Telegram ProfileSTW Control Word Data PDP003Z supports only speed control mode Bit Value NameBit Valure Name ZSW Status Word Data15s 20s 25s 30s Setpoint Actual valueTmax ZSW BitState Machine Example 1 Hz Forward running and Deceleration stop AK Request from Master to PDP003Z） Access to the Profibus parameterProfibus parameter PNU Value Mode13 9A Example 1. Reading the PNU 922 TelegramAccess to VF-MB1/S15 parameter Response Value 0x03E8 = 1000 10.00Hz Vendor Spec. Profile Profibus Master How to useBit Function Overview of the VF-MB1/S15 parameter2. fa23 Communication command Specified data output ST=ON ST=OFF E6581738 RES RY-RC Diagnostic Master DP-V1 functionProfibs DP-V1 Communication VF-MB1/S15Example1. Read the PROFIdrive parameter 0x02 Example 2. Change the PROFIdrive parameter0x9F 0x820xE8 Example 3. Read the VF-MB1/S15 parameter0xFD 0x31Example 4. Change the VF-MB1/S15 parameter 0x300x07 GSD file Profibus Local/Remote OperationFunction number Appendix