14. General Information
14.2 Specifications
14.2.1 Base unit
■Applicable lines:
Public Switched Telephone Network
■Document size:
Max. 216 mm in width, Max. 600 mm in length
■Effective scanning width: 208 mm
■Effective printing width: A4: 202 mm
■Transmission time*1: Approx. 8 s/page
■Scanning density: Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution,
7.7lines/mm – in fine/photo resolution,
15.4lines/mm – in super fine resolution
■Photo resolution:
■Scanner type: Contact Image Sensor
■Printer type:
Thermal Transfer on plain paper
■Data compression system:
Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)
■Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
■Operating environment:
5 °C – 35 °C, 20 % – 80 % RH (Relative Humidity)
■Dimensions:
Approx. height 128 mm ⋅ width 389 mm ⋅ depth 242 mm
■Mass (Weight): Approx. 3.4 kg
■Power consumption: Standby: Approx. 6 W Transmission: Approx. 16 W
Reception: Approx. 50 W (When receiving a 20 % black document)
Copy: Approx. 50 W (When copying a 20 % black document)
Maximum: Approx. 130 W (When copying a 100 % black document)
■Power supply:
220 V – 240 V AC, 50/60 Hz
■Fax memory capacity*3:
Approx. 25 pages of memory transmission Approx. 28 pages of memory reception (Based on the
■Voice memory capacity*4:
Approx. 18 minutes of recording time including greeting messages
■Copy memory capacity:
Approx. 10 pages (Based on the
*1 Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other party’s machine.
*2 Transmission speed is based upon the
*3 If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will be retained in memory.
*4 Recording time may be reduced by the calling party’s background noise.
ITU-T No. 1 Test Chart
Recording paper specifications
Recording paper size: A4: 210 mm ⋅ 297 mm
Recording paper weight: 64 g/m2 to 80 g/m2
Note for recording paper:
LDo not use the following types of paper:
–Paper with a cotton and/or fibre content that is over 20 %, such as letterhead paper or paper used for resumes
–Extremely smooth or shiny paper, or paper that is highly textured
–Coated, damaged or wrinkled paper
106