10. Programmable Features
6.Select “Yes”, then press {>}.
7.Press {ih}.
Note:
LThe following items will be deleted or reset to their default settings:
–Settings listed on page 73 (not including items using the base unit PIN)
–Redial list
–Voice enhancer
–Category names
–Category ring tones
LThe following items will be retained:
–Handset phonebook items (category names and ring tones will be reset to their default settings.)
–Date and time
10.5.8Programmable functions using the base unit PIN
{j/OK}
{ih}
{>}
{C/T}
Helpful hints:
LTo exit programming, press {ih} at any time.
10.5.9 Call Options
Changing the recall time
Change the recall time of the handset, if necessary, depending on the requirements of your service provider or PBX.
1.Press {j/OK}.
2.Select “Base Unit Setup”, then press
{>}.
3.Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page 80).
4.Select “Call Options”, then press {>}.
5.Select “Recall”, then press {>}.
6.Select the desired setting, then press {>}.
7.Press {ih}.
Setting pause length
Change the pause length of the handset, if necessary, depending on the requirements of your service provider or PBX.
1.Press {j/OK}.
2.Select “Base Unit Setup”, then press
{>}.
3.Enter “0000” (default base unit PIN).
LIf you changed the PIN, enter it (page 80).
4.Select “Call Options”, then press {>}.
5.Select “Pause Length”, then press {>}.
6.Select the desired setting, then press {>}.
7.Press {ih}.
78