Panasonic KX-FC235AL manual Standard, Number of channels 120 Duplex Channels, Duplex procedure

Page 109

14. General Information

–Paper with foreign objects attached, such as tabs or staples

–Paper which has dust, lint or oil stains

–Paper that will melt, vaporize, discolour,

scorch or emit dangerous fumes near 200 °C, such as vellum paper. These materials may transfer onto the fusing roller and cause damage.

–Moist paper

LSome paper only accepts print on one side. Try using the other side of the paper if you are

not happy with the print quality or if misfeeding occurs.

LFor proper paper feeding and best print quality, we recommend using long-grained

paper.

LDo not use paper of different types or thickness at the same time. This may cause a

paper jam.

LAvoid double-sided printing.

LDo not use paper printed from this unit for double-sided printing with other copiers or printers. This may cause a paper jam.

LTo avoid curling, do not open paper packs until you are ready to use the paper. Store unused paper in the original packaging, in a cool and dry location.

14.2.2 Handset

■Standard:

GAP (Generic Access Profile)

■Number of channels: 120 Duplex Channels

■Frequency range: 1.88 GHz to 1.9 GHz

■Duplex procedure:

TDMA (Time Division Multiple Access)

■Channel spacing: 1,728 kHz

■Bit rate:

1,152 kbit/s

■Modulation:

GFSK

■RF transmission power: Approx. 250 mW

■Operating environment:

5 °C – 40 °C, 20 % – 80 % RH (Relative Humidity)

■Dimensions:

Approx. height 148 mm ⋅ width 48 mm ⋅ depth 32 mm

■Mass (Weight): Approx. 130 g

Note:

LDesign and specifications are subject to change without notice.

L The pictures and illustrations in these instructions may vary slightly from the actual product.

107

Image 109

Contents KX-FC231NZ Open How to use the operating instructionsBase unit Location of ControlsHandset Buttons Listed in alphabetical orderKX-FC235AL Attach your sales receipt hereKX-FC231NZ TrademarksFor New Zealand users For Australian usersService difficulties InstallationImportant information for Australian users Instructions to customerImportant safety instructions Battery For best performance Phonebook Before calling back102 101103 105Quantity Included accessoriesFor Australian users For New Zealand usersAvailable accessories Accessory informationFor Users in New Zealand General Warning Important NoticeButton descriptions of the base unit Button descriptions of the handset Display icons Display descriptions of the handsetDisplay icon Meaning Overview Installing the ink film Ink film installation / replacementIncorrect CorrectReplacing the ink film Paper trayCorrectIncorrect Recording paperInstalling the batteries Battery installation / replacementReplacing the batteries Panasonic batteries. See page 11 forConnections Battery strength Battery chargeBattery icons Battery strength Battery lifePower on Turning the handset power ON/OFFPower OFF Base unit help functionRinger volume Adjusting handset Adjusting base unit VolumeINT Ring toneWith the handset Date and timeExample 315 PM 12-hour time entry Example 10 August, 2005 Press 10 08With the base unit Your logoSET Menu Example 315PM 12-hour time entry 1. Press 03Keypad Characters To select characters using a or BTo enter your logo Example Bill To change uppercase or lowercase lettersYour FAX no Press SET Your fax numberExample +64 9 To delete a numberMaking phone calls Key lock MuteTo turn key lock OFF, press j/OK for about 2 seconds Digital SP-PHONE MuteAuto talk feature INT. Any key answer featureAnswering phone calls Handset phonebookCategories Making a phone call using the phonebookEditing a stored item One touch dial Erasing stored itemsChain dial Erasing a stored item Base unit phonebookErase Digital SP-PHONE How Caller ID is displayed Caller ID serviceAnother method to erase a stored item Using Caller ID type Category features for Caller ID subscribersChanging category ring tones Caller ID Viewing and calling back using caller informationFAX/START Digital SP-PHONE Erasing caller information Editing a caller’s telephone number before calling backInto the handset phonebook Storing caller information into the phonebookInto the base unit phonebook To erase specific caller information Press Caller IDCall minder for New Zealand users only Voice mail service for Australian users onlyUsing public mailbox and private mailboxes SMS Short Message ServiceTurning SMS ON/OFF Changing SMS message centre numbersWriting and sending a new message Sending a messageDisplaying / Sending a saved message Receiving a messageEditing a saved message Erasing saved messagesErasing received messages Displaying a received messageStoring the sender’s number in the handset phonebook Editing the sender’s number before calling backChanging private mailbox settings Guide to SMS settingsStoring the PBX line access number for PBX users only Creating private mailboxesAvailable character entries for SMS How to enter charactersCharacter entry modes LetterWise character table for EnglishFollowing are used for both uppercase and lowercase Stop Redial FAX/START Digital SP-PHONE Sending a fax manuallyDocuments you can send Broadcast transmission Sending a fax using the base unit phonebookProgramming items into the broadcast memory Adding a new item into the broadcast memoryErasing a stored item from the broadcast memory To cancel broadcast transmissionSending the same document to pre-programmed parties To send the same document to a one-time group of partiesSelecting the way to use your fax machine Use only as a fax FAX only modeAuto receive How to receive phone calls and faxes Use mostly as a telephone TEL modeManual receive Receiving a fax manually Auto answer Activating TEL modeStop FAX/START Digital SP-PHONE TAM/FAX Mode Activating TAM/FAX modeRing setting in TAM/FAX mode Receiving a fax automatically Auto answer onFAX only Mode Activating FAX only modeStoring undesired callers Activating the junk fax prohibitorTo display the junk fax prohibitor list To print the junk fax prohibitor listUsing with the ring detection feature Making a copy More copying featuresStop Start Default Setting Recording Original Paper size Document SizeA4, Letter LegalErasing your recorded greeting message Recording your greeting messageSET MIC Stop Erase GREETING/REC GREETING/CHECK Press GREETING/RECLeaving a message for others or yourself Listening to recorded messagesErasing recorded messages SET Stop Erase PlaybackFor voice mail/Call minder service subscribers Operating from a remote location Remote operation using remote commandsSummary of remote operation To turn on the auto answer setting Turn OFF auto answer settingSkip greeting message Recording a marker messageProgramming advanced features Programming basic featuresBase unit programming Basic features Advanced features Code #43 Setting the recording time alert Code #42 Setting the message alertCode #44 Setting the memory reception alert Code #46 Setting friendly receptionCode #67 Setting the incoming message monitor Code #58 Setting the scan contrastCode #68 Setting the Error Correction Mode ECM Code #76 Setting the connecting toneProgram code and direct command button Direct commands for programming features#80 Set default YES OFF #76 Connecting tone#36 Receiving reduction 72% 86% #39 Display contrastHandset programming Programmable Features Night mode AlarmProgrammable functions Ringer optionsDisplay setup Other options Call optionsSetting pause length Programmable functions using the base unit PINChanging the recall time Storing/changing emergency numbers Setting call restrictionSelecting area codes to be deleted automatically Changing the base unit PIN personal identification number Resetting handset programming that uses the base unit PINRegistering a handset to a base unit Operating additional unitsCancelling a base unit Cancelling a handsetHandset locator Increasing the range of the base unitExample When handset 1 transfers a call to handset Handset Example When handset 1 calls handset HandsetIntercom between handsets Transferring calls between handsets / Conference callsCopying a stored item Copying handset phonebook itemsCopying all stored items LetterWise character table for English KX-FC235AL only Available character entries for the handsetAlphabet character table ABC Numeric entry table Extended 2 character table O Greek character table M Extended 1 character table NCyrillic character table P Error messages Reports Display Cause and Solution Error messages Base unit displayPlease use genuine Panasonic replacement film Service personnelTransmission error occurred. Try again Unnecessary messagesInitial settings When a function does not work, check hereGeneral Returns to standby mode Problem Cause & Solution Speakerphone is notProblem Cause & Solution Handset does not Charging but the batteryDocuments using Problem Cause & SolutionIs pressed Static, sound cuts in/outFax receiving Fax sendingWhen an extension Receiving modeDocuments automatically Display showsAnswering machine CopyingSMS KX-FC235AL only If a power failure occurs Recording paper jams When the recording paper has jammed in the unitCorrect START1 When the recording paper was not fed into the unit properlyDocument jams sending Do not use paper products, such as paper towels or tissues Document feeder / scanner glass cleaningThermal head cleaning 104 Reference lists and reports Base unit only Specifications RF transmission power Approx mW Operating environment Duplex procedureMass Weight Approx g StandardIndex 109 110 111 Panasonic New Zealand Limited Sales Department Panasonic Australia Pty. LimitedManufacturer Panasonic Communications Malaysia Sdn. Bhd Global web site Copyright PFQX2248ZA CM0605DT0