Airlink CDMA/1x manual Information and Status, Command Details

TABLE 1. Information and Status

Command	Details
I[n]	n=0 Product name (for example, Raven).
	n=1 The Raven’s firmware (ALEOS) version, hardware
	ID, and copyright.
	n=2 The internal hardware's firmware version and relevant
	hardware ID.
	n=3 The hardware module's unique ID (ESN).
	n=5 View active profile (the contents of the active regis-
	ters).
&V	View active profile (the contents of the active registers).
*HOSTMODE?	The current host mode (AT, PPP, UDP, etc.). If the Raven
	is not in AT mode, telnet into the modem to execute this
	command.
*NETCHAN?	The current active CDMA channel number.
*NETERR?	The EVDO or CDMA network frame error rate.
*NETIP?	The current IP address of the modem reported by the
	embedded OEM module (generally obtained from Car-
	rier). This is the address to which packets can be sent in
	order to contact the Raven from the Internet. Note: If
	there is no current network IP, 0.0.0.0 may be displayed.
	Use *NETALLOWZEROIP if you need to allow the dis-
	play of an IP ending in a zero .
*NETOK	Checks the CDMA network connection.
	OK if connected.
	ERROR if not connected.
*NETPHONE?	The modem's phone number (if applicable or obtainable).
*NETRSSI?	The current RSSI (Receive Signal Strength Indicator) of
	the Raven as a negative dBm value.
	The same information is displayed with the command
	S202?.

Raven CDMA User Guide for Verizon, version 2.23 59