Airlink CDMA/1x manual Cellular Network Verizon’s Cdma

Cellular Network

The Raven’s cellular network is the connection to CDMA and remote devices or computers.

TABLE 5. Cellular Network (Verizon’s CDMA)

Command	Parameters	Details
*NETALLOWZEROIP=n	n=0 or 1	Allows the displayed IP address in *NETIP to end in
		zero (ex. 192.168.1.0).
		0 : Do not allow
		1 : Allow
*NETCHAN?	none	The current active CDMA channel number.
*NETERR?	none	The EVDO or CDMA network frame error rate.
*NETIP?	none	The current IP address of the modem reported by the
		embedded hardware module (generally obtained from
		Carrier). This is the address to which packets can be
		sent in order to contact the Raven from the Internet.
		Note: If there is no current network IP, 0.0.0.0 may be
		displayed.
		Refer to *NETALLOWZEROIP if you need to allow
		the display of an IP ending in a zero.
*NETOK?	none	Checks the CDMA connection.
		OK if connected.
		ERROR if not connected.
*NETRSSI?	none	The current RSSI (Receive Signal Strength Indicator) of
		the Raven as a negative dBm value. The same informa-
		tion is displayed with the command S202?.
*NETSTATE?	none	See *NETSTATE?.
*NETWDOG=n	n=minutes	Network connection watchdog: The number of minutes
		to wait for a network connection. If no connection is
		established within the set number of minutes, the Raven
		resets.
		Default = 20 min. 0 = Disable.

64 Raven CDMA User Guide for Verizon, version 2.23