Airlink CDMA/1x manual Time and Date, Mm/dd/yyyy =, Yyyy,hhmmss, Hhmmss =, D.dname

TABLE 9. Telnet

Command	Parameters	Details
*TELNETTIMEOUT=n	n=minutes	Telnet port inactivity time out.
		By default, this value is set to close the AT telnet con-
		nection if no data is received for 2 minutes.
*TPORT=p	p=0-65535	Sets or queries the port used for the AT Telnet server. If 0
		is specified, the AT Telnet server will be disabled. The
		default value is 2332.

Time/Date

Time and Date in the Raven is set to UTC (Coordinated Universal Time). Time is expressed in 24-hour format, i.e. 13:23:57 would be 1:23pm. You can set time and date manually or you can have it set automatically with a regular query to an Inter- net time server (such as time.nist.gov) using SNTP (Simple Network Time Proto- col).

TABLE 10. Time and Date

Command	Parameters	Details
*DATE=[mm/dd/	mm/dd/yyyy =	Sets and queries the clock in the unit. Either the date and
yyyy],[hh:mm:ss]	month, day, year	time can be specified, or simply one of the two can be
		specified in which case the unspecified value will remain
	hh:mm:ss =
		unchanged. The date and time are always specified 24-
	time in 24-hour
		hour notation.
	notation
*SNTP=n	n=0 or 1	Enables daily SNTP update of the system time.
		0 : Off
		1 : On
*SNTPADDR=	d.d.d.d=IP	SNTP Server IP address, or fully-qualified domain
[d.d.d.d][name]	name=domain	name, to use if *SNTP=1.
		Note: If blank, time.nist.gov is used.
	name
*SNTPQUERY?	none	The current SNTP time and date.

76 Raven CDMA User Guide for Verizon, version 2.23