Samsung CLX-3175N, CLX-3175FW, CLX-3175FN, CLX-3170FN manual 11Safety information

Page 107

REPLACING THE FITTED PLUG (FOR UK ONLY)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.

Contact the people from you purchased the machine.

The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.

Important warning:

You must earth this machine.

The wires in the mains lead have the following color code:

•Green and Yellow: Earth

•Blue: Neutral

•Brown: Live

If the wires in the mains lead do not match the colors marked in your plug, do the following:

You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green.

You must connect the blue wire to the pin which is marked with the letter “N” or colored black. You must connect the brown wire to the pin which is marked with the letter “L” or colored red. You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.

DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)

Approvals and Certifications

The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/ 68/EEC Directives of the European Union as of the dates indicated:

January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment.

January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic compatibility.

March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative.

EC Certification

Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)

This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries:

In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.

The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory notes contained in this document.

11_Safety information

Page 106 Page 108
Image 107
Page 106 Page 108
Contents Multi Functional Printer Special Features Features of your new laser productConvention Description Example Features by ModelsFeatures About this USER’S GuidePrinter Driver Help Quick Install GuideFinding More Information Online User’s GuideWhat the icons and signs in this user’s guide mean Safety informationImportant Safety Symbols and Precautions Laser Safety Statement Recycling Ozone SafetyMercury Safety Power SaverCanadian Radio Interference Regulations FCC Statement for Wireless LAN useUnited States of America FAX BrandingYou should also know that Ringer Equivalence NumberEC Certification Replacing the Fitted Plug for UK onlyDeclaration of Conformity European Countries Approvals and CertificationsEEA/EFTA countries European States qualified under wireless approvalsRegulatory Compliance Statements Wireless GuidanceOriginal Ssleay License Openssl License14Safety information Safety information15 Contents Receiving a fax Printing a document Canceling a print job Sending a faxFax setup Scanning by a network connectionManaging USB memory Solving other problemsPrinting from a USB memory device Backing up dataGeneral specifications Fax problemsCommon Linux problems How to purchaseFront view Rear view IntroductionMachine Overview Control Panel Overview Status Description Understanding the Status LEDAcknowledging the Status of the Toner Cartridge Darkness Sending Menu OverviewSupplied Software Printer Driver FeaturesContents Feature Windows Linux MacintoshGetting started Setting UP the HardwareLinux System RequirementsWindows MacintoshSupported operating environments Setting UP the NetworkConfiguring network protocol via the machine Using the SetIP programInstalling the Software Hexadecimal Format Ascii Format Using a Wireless NETWORKCLX-3175FW onlyWizard mode Custom modeOperation Mode is Ad-hoc Configuring wireless network from syncthru web serviceSelect Network NameSSID in Ssid Setup Operation Mode is InfrastructureMachines Basic Settings Using the save modes Entering characters using the number keypadAuto continue ADF Loading originals and print mediaLoading Originals On the scanner glassSelecting Print Media Type Size Dimensions Weighta Capacityb Specifications on print mediaMedia Type Guidelines Media sizes supported in each modeMode Size Source Guidelines for special print mediaPaper Changing the Size of the Paper in the Paper TrayPreprinted Slide the tray 1 back into the machine Feeding the print material manually Setting the Paper Size and TypePrinting on Special Print Materials Copying Changing the Settings for Each CopyCopying Up or 4-up copying Changing the Default Copy SettingsUsing Special Copy Features ID Card CopyingGray enhance copying Setting Copy TimeoutClone copying Erasing background imagesScanning from the Control Panel Setting scan information in Samsung Scan ManagerScanning Scanning BasicsScanning to Email Setting up an e-mail accountClick Machine Settings and User Authentication Scanning by a Network ConnectionSetting UP Address Book Changing the Settings for Each Scan JOBChanging the Default Scan Settings Searching with a particular first letter Printing Address BookScanning Printing a Document Canceling a Print JOBBasic printing Faxing Setting the fax headerAdjusting the document settings ResolutionAutomatic redialing Sending a fax automaticallySending a fax manually Confirming a transmissionSending a priority fax Sending a delayed faxAdding pages to a delayed fax Canceling a delayed faxReceiving a FAX Forwarding faxes Receiving in secure receiving modeActivating secure receiving mode Receiving faxes in memorySending options FAX SetupChanging the fax setup options Forwarding received faxes to email addressSpeed dial numbers Changing the default document settingsSetting up Address Book Printing sent fax report automaticallyPrinting Address Book Group dial numbersSearching Address Book for an entry Deleting a Address Book entryScanning to a USB Memory Device Using USB memory deviceAbout USB Memory Plugging in a USB Memory DeviceBacking UP Data Printing from a USB Memory DeviceFormatting a USB memory device Managing USB MemoryPrinting Directly from a Digital Camera Deleting an image filePrinting a report MaintenanceAdjusting the Color Contrast Printing ReportsClearing Memory Cleaning Your MachineCleaning the outside Cleaning the insideMaintenance White sheet ADF Sheet Scanner glass Scanner lid Cleaning the scan unitExpected cartridge life Maintaining the CartridgeReplacing the Toner Cartridge Toner cartridge storageMaintenance Replacing the Imaging Unit Replacing the Waste Toner Container Checking the MACHINE’S Serial Number Maintenance PartsTo access SyncThru Web Service Managing Your Machine from the WebsiteExit misfeed TroubleshootingTips for Avoiding Paper Jams Clearing Document JamsFuser unit area Clearing Paper JamsRoller misfeed TrayFuser lever Paper exit areaTroubleshooting Understanding Display Messages Meaning Suggested SolutionsOver Heat Error Network ErrorOpen Heat Error Not Assigned Page/Cancel JobContinue or Black Only Wrong ConfigPOP3 Stop Pressed Stop/Clear has beenCondition Possible Suggested Solutions Cause Solving Other ProblemsPrinting problems Condition Suggested SolutionsPrinting quality problems Vertical lines Toner specksDropouts White SpotsCopying problems Samsung Scan Manager problems Scanning problemsCommon Windows problems Fax problemsCommon Linux problems Not scan Common Macintosh problemsNot appear on Scanners listType Average Yielda Part Number HOW to PurchaseOrdering supplies SuppliesGeneral Specifications SpecificationsCopier Specifications Printer SpecificationsScanner Specifications Facsimile Specifications Glossary Fuser Unit ITU-T No chartEthernet EtherTalkOriginals MAC addressModem NetWareWatermark Subnet MaskToner Cartridge UNC PathIndex Clock mode 31 control panel 21 copyingReceiving a fax Country Customer Care Center WEB Site Contact Samsung worldwideSwitzerland Page Features of your new laser product CLX-3175 CLX-3175N Finding More Information Page Safety information6 7Safety information Safety information8 9Safety information Safety information10 11Safety information Safety information12 13Safety information Safety information14 15Safety information Installing the software Machines basic settings Setting up the network CLX-3175N onlyScanning Basic Printing Using USB Memory Device Maintenance Troubleshooting CLX-3175N only Stop/Clear StatusScan to 57 to solve the problem Reduce/Enlarge Change Default USB feature Machine Setup Supplied Software Getting started System Requirements Setting UP the Network CLX-3175N only Installing the Software Key sound, and alarm sound Getting started Loading originals and print media Specifications on print media Printer specifications on page 69. The extra flaps Changing the Size of the Paper in the Paper Tray Slide the tray 1 back into the machine Printing on Special Print Materials Copying Press OK when Copy Feature appears Setting Copy Timeout Scanning Changing the Settings for Scan JOB Scanning Basic printing Using USB memory device Printing from a USB Memory Device Managing USB Memory Maintenance Cleaning Your Machine Cleaning the scan unit Maintaining the Cartridge Replacing the Toner Cartridge Replacing the Imaging Unit Replacing the Waste Toner Container Maintenance Parts Clearing paper jams Solving other problems Paper exit area Fuser lever Understanding Display Messages Expires soon Replaceables on 53 and call for Service Solving Other Problems 50. If this does not improve the print White spots appear on AaBbC Scanned face down on the scanner glass Samsung Scan Manager problems Come out Common Macintosh problems Ordering supplies Containerc,d Memory Copying mode Less than 50 dBAYieldc.d Waste toner Network Scanb File format Effective Glossary FDI LED TCP/IP Adjustment Contact Samsung worldwide Switzerland Page REV Software section Contents Sharing the Printer Locally Using Your Printer in Linux Select Typical installation for a local printer. Click Next Installing Printer SoftwareInstalling Software for Local Printing Select Custom installation. Click Next Custom InstallationInstalling Printer Software in Windows Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Next Installing mono printer driverClick OK in the Install From Disk window Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentSelect Printers and Faxes Select your printer driver icon Printer SettingsPrinting to a file PRN Paper Tab Layout TabGraphics Tab Color ModeAbout Tab Using a Favorite SettingUsing Help Extras TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersNone Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document Fitting Your Document to a Selected Paper SizeEditing a Watermark Using WatermarksUsing an Existing Watermark Creating a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page OverlayDouble-clickPrinters and Faxes Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxUsing Samsung SmarThru Scanning Using Samsung SmarThruUninstalling Samsung SmarThru Using Onscreen Help File Windows Vista Scanning Process with TWAIN- enabled SoftwareScanning Using the WIA Driver Windows XPUnderstanding Smart Panel Using Smart PanelUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Getting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Click Uninstall Uninstalling the Unified Linux DriverStarting the program Using SetIP programUsing the Unified Driver Configurator Opening the Unified Driver ConfiguratorScanners Configuration Printers ConfigurationPorts Configuration Configuring Printer PropertiesPrinting Files Printing from ApplicationsClick Properties Scanning a DocumentAdding Job Type Settings Using the Image ManagerTools Function Select Uninstall and click Uninstall Installing SoftwareUninstalling software Select Easy Install and click Install. Easy Install isSelect Socket/HP Jet Direct in Printer Type Setting Up the PrinterFor a Network-connected Click Add on the Printer ListFor a USB-connected Printing a Document Changing Printer SettingsPrinting Graphics Printing Multiple Pages on One Sheet of PaperScanning with network Setting scan information in Scan ManagerScanning Scanning with USBIndex Macintosh 37 uninstall
Top Page Image Contents