Samsung CLX-3175FW Setting UP the Network CLX-3175N only, Supported operating environments

Page 122

SETTING UP THE NETWORK (CLX-3175N ONLY)

You need to set up the network protocols on the machine to use it in the network environment. You can set up the basic network settings through the machine's control panel.

Supported operating environments

The following table shows the network environments supported by the machine:

ITEM

 

REQUIREMENTS

 

 

 

Network interface

•

Ethernet 10/100 Base-TX

 

 

 

Network operating system

•

Windows 2000/XP/2003/Vista

 

•

Various Linux OS

 

• MAC OS 10.3 ~ 10.5

 

 

 

Network protocols

•

TCP/IP

 

•

Standard TCP/IP

 

•

LPR

 

•

IPP/HTTP

 

•

Bonjour

 

•

DHCP

 

•

BOOTP

 

 

 

If you are in a non-static IP address environment and need to setup a DHCP network protocol, go to the http://developer.apple.com/ networking/bonjour/download/, select the program Bonjour for Windows due to your computer operating system, and install the program. This program will allow you to fix the network parameter automatically. Follow the instruction in the installation window. This

Bonjour program does not support Linux.

Configuring network protocol via the machine

You can set up TCP/IP network parameters, follow the steps listed below.

1.Make sure your machine is connected to the network with an RJ-45 Ethernet cable.

2.Make sure you have turned on the machine.

3.Press Menu and then OK.

4.Press the left/right arrow until Network appears and press OK.

5.Press the left/right arrow until TCP/IP appears and press OK.

6.Press the left/right arrow until Static appears and press OK.

7.Press the left/right arrow until IP Address appears and press OK. Enter a byte between 0 and 255 using the left/right arrow and press OK. Repeat this to complete the address from the 1st byte to the 4th byte.

8.Repeat steps 7 to configure the other TCP/IP parameters: subnet mask and gateway address.

9.Press Stop/Clear to return to ready mode.

Contact the network administrator if you are not sure how to configure.

You can also set up the network settings through the network administration programs.

•SyncThru™ Web Admin Service: Web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate

internet access. Download this program from http:// solution.samsungprinter.com.

•SyncThru™ Web Service: Web server embedded on your network print server, which allows you to:

-Configure the network parameters necessary for the machine to connect to various network environments.

-Customize machine settings.

•SetIP: Utility program allowing you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. (See "Using the SetIP program" on page 26.)

Using the SetIP program

This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it helps the network administrator set several network IPs at the

same time.

• You can only use SetIP program when your machine is connected to a network.

•The following procedure is based on windows XP. If you use Macintosh or Linux OS, see Software section

Installing the program

1.Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the window.

2.Start Windows Explorer and open the X drive. (X represents your CD- ROM drive.)

3.Double-clickApplication > SetIP.

4.Double-click Setup.exe to install this program.

5.Click OK.

If necessary, select a language from the drop-down list.

6.Follow the instructions in the window and complete the installation.

Setting network values

1.Print the machine’s network configuration report to find your machine’s MAC address. See "Printing reports" on page 46.

2.From the Windows Start menu, select All Programs > Samsung Network Printer Utilities > SetIP > SetIP.

3.Click to open the TCP/IP configuration window.

4.Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.

when you enter the MAC address, enter it without colon(:).

5.Click OK, then the machine prints the network information. Confirm the settings are correct.

6.Click Exit.

Getting started_ 26

Page 121 Page 123
Image 122
Page 121 Page 123
Contents Multi Functional Printer Features of your new laser product Special FeaturesAbout this USER’S Guide Features by ModelsFeatures Convention Description ExampleOnline User’s Guide Quick Install GuideFinding More Information Printer Driver HelpWhat the icons and signs in this user’s guide mean Safety informationImportant Safety Symbols and Precautions Laser Safety Statement Power Saver Ozone SafetyMercury Safety RecyclingFAX Branding FCC Statement for Wireless LAN useUnited States of America Canadian Radio Interference RegulationsRinger Equivalence Number You should also know thatApprovals and Certifications Replacing the Fitted Plug for UK onlyDeclaration of Conformity European Countries EC CertificationEuropean States qualified under wireless approvals EEA/EFTA countriesWireless Guidance Regulatory Compliance StatementsOpenssl License Original Ssleay License14Safety information Safety information15 Contents Scanning by a network connection Printing a document Canceling a print job Sending a faxFax setup Receiving a faxBacking up data Solving other problemsPrinting from a USB memory device Managing USB memoryHow to purchase Fax problemsCommon Linux problems General specificationsFront view Rear view IntroductionMachine Overview Control Panel Overview Status Description Understanding the Status LEDAcknowledging the Status of the Toner Cartridge Menu Overview Darkness SendingFeature Windows Linux Macintosh Printer Driver FeaturesContents Supplied SoftwareSetting UP the Hardware Getting startedMacintosh System RequirementsWindows LinuxUsing the SetIP program Setting UP the NetworkConfiguring network protocol via the machine Supported operating environmentsInstalling the Software Custom mode Using a Wireless NETWORKCLX-3175FW onlyWizard mode Hexadecimal Format Ascii FormatOperation Mode is Infrastructure Configuring wireless network from syncthru web serviceSelect Network NameSSID in Ssid Setup Operation Mode is Ad-hocMachines Basic Settings Entering characters using the number keypad Using the save modesAuto continue On the scanner glass Loading originals and print mediaLoading Originals ADFSelecting Print Media Specifications on print media Type Size Dimensions Weighta CapacitybGuidelines for special print media Media sizes supported in each modeMode Size Source Media Type GuidelinesPaper Changing the Size of the Paper in the Paper TrayPreprinted Slide the tray 1 back into the machine Feeding the print material manually Setting the Paper Size and TypePrinting on Special Print Materials Copying Changing the Settings for Each CopyCopying ID Card Copying Changing the Default Copy SettingsUsing Special Copy Features Up or 4-up copyingErasing background images Setting Copy TimeoutClone copying Gray enhance copyingScanning Basics Setting scan information in Samsung Scan ManagerScanning Scanning from the Control PanelScanning by a Network Connection Setting up an e-mail accountClick Machine Settings and User Authentication Scanning to EmailSetting UP Address Book Changing the Settings for Each Scan JOBChanging the Default Scan Settings Printing Address Book Searching with a particular first letterScanning Printing a Document Canceling a Print JOBBasic printing Resolution Setting the fax headerAdjusting the document settings FaxingConfirming a transmission Sending a fax automaticallySending a fax manually Automatic redialingCanceling a delayed fax Sending a delayed faxAdding pages to a delayed fax Sending a priority faxReceiving a FAX Receiving faxes in memory Receiving in secure receiving modeActivating secure receiving mode Forwarding faxesForwarding received faxes to email address FAX SetupChanging the fax setup options Sending optionsPrinting sent fax report automatically Changing the default document settingsSetting up Address Book Speed dial numbersDeleting a Address Book entry Group dial numbersSearching Address Book for an entry Printing Address BookPlugging in a USB Memory Device Using USB memory deviceAbout USB Memory Scanning to a USB Memory DevicePrinting from a USB Memory Device Backing UP DataDeleting an image file Managing USB MemoryPrinting Directly from a Digital Camera Formatting a USB memory devicePrinting Reports MaintenanceAdjusting the Color Contrast Printing a reportCleaning the inside Cleaning Your MachineCleaning the outside Clearing MemoryMaintenance Cleaning the scan unit White sheet ADF Sheet Scanner glass Scanner lidToner cartridge storage Maintaining the CartridgeReplacing the Toner Cartridge Expected cartridge lifeMaintenance Replacing the Imaging Unit Replacing the Waste Toner Container Managing Your Machine from the Website Maintenance PartsTo access SyncThru Web Service Checking the MACHINE’S Serial NumberClearing Document Jams TroubleshootingTips for Avoiding Paper Jams Exit misfeedTray Clearing Paper JamsRoller misfeed Fuser unit areaPaper exit area Fuser leverTroubleshooting Meaning Suggested Solutions Understanding Display MessagesNot Assigned Page/Cancel Job Network ErrorOpen Heat Error Over Heat ErrorStop Pressed Stop/Clear has been Wrong ConfigPOP3 Continue or Black OnlyCondition Suggested Solutions Solving Other ProblemsPrinting problems Condition Possible Suggested Solutions CausePrinting quality problems White Spots Toner specksDropouts Vertical linesCopying problems Scanning problems Samsung Scan Manager problemsFax problems Common Windows problemsCommon Linux problems Scanners list Common Macintosh problemsNot appear on Not scanSupplies HOW to PurchaseOrdering supplies Type Average Yielda Part NumberSpecifications General SpecificationsCopier Specifications Printer SpecificationsScanner Specifications Facsimile Specifications Glossary EtherTalk ITU-T No chartEthernet Fuser UnitNetWare MAC addressModem OriginalsUNC Path Subnet MaskToner Cartridge WatermarkClock mode 31 control panel 21 copying IndexReceiving a fax Contact Samsung worldwide Country Customer Care Center WEB SiteSwitzerland Page Features of your new laser product CLX-3175 CLX-3175N Finding More Information Page Safety information6 7Safety information Safety information8 9Safety information Safety information10 11Safety information Safety information12 13Safety information Safety information14 15Safety information Setting up the network CLX-3175N only Installing the software Machines basic settingsScanning Basic Printing Using USB Memory Device Maintenance Troubleshooting CLX-3175N only Stop/Clear StatusScan to 57 to solve the problem Reduce/Enlarge Change Default USB feature Machine Setup Supplied Software Getting started System Requirements Setting UP the Network CLX-3175N only Installing the Software Key sound, and alarm sound Getting started Loading originals and print media Specifications on print media Printer specifications on page 69. The extra flaps Changing the Size of the Paper in the Paper Tray Slide the tray 1 back into the machine Printing on Special Print Materials Copying Press OK when Copy Feature appears Setting Copy Timeout Scanning Changing the Settings for Scan JOB Scanning Basic printing Using USB memory device Printing from a USB Memory Device Managing USB Memory Maintenance Cleaning Your Machine Cleaning the scan unit Maintaining the Cartridge Replacing the Toner Cartridge Replacing the Imaging Unit Replacing the Waste Toner Container Maintenance Parts Clearing paper jams Solving other problems Paper exit area Fuser lever Understanding Display Messages Expires soon Replaceables on 53 and call for Service Solving Other Problems 50. If this does not improve the print White spots appear on AaBbC Scanned face down on the scanner glass Samsung Scan Manager problems Come out Common Macintosh problems Ordering supplies Containerc,d Memory Copying mode Less than 50 dBAYieldc.d Waste toner Network Scanb File format Effective Glossary FDI LED TCP/IP Adjustment Contact Samsung worldwide Switzerland Page REV Software section Contents Sharing the Printer Locally Using Your Printer in Linux Select Typical installation for a local printer. Click Next Installing Printer SoftwareInstalling Software for Local Printing Custom Installation Select Custom installation. Click NextInstalling Printer Software in Windows Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Removing Printer Software Installing mono printer driverClick OK in the Install From Disk window NextPrinting a Document Select your printer driver from the Name drop-down listSelect Printers and Faxes Select your printer driver icon Printer SettingsPrinting to a file PRN Layout Tab Paper TabColor Mode Graphics TabExtras Tab Using a Favorite SettingUsing Help About TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Double-clickPrinters and FaxesUsing Samsung SmarThru Scanning Using Samsung SmarThruUninstalling Samsung SmarThru Using Onscreen Help File Windows XP Scanning Process with TWAIN- enabled SoftwareScanning Using the WIA Driver Windows VistaUsing Smart Panel Understanding Smart PanelUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Getting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using SetIP programUsing the Unified Driver Configurator Starting the programPrinters Configuration Scanners ConfigurationConfiguring Printer Properties Ports ConfigurationPrinting from Applications Printing FilesScanning a Document Click PropertiesUsing the Image Manager Adding Job Type SettingsTools Function Select Easy Install and click Install. Easy Install is Installing SoftwareUninstalling software Select Uninstall and click UninstallClick Add on the Printer List Setting Up the PrinterFor a Network-connected Select Socket/HP Jet Direct in Printer TypeFor a USB-connected Printing a Document Changing Printer SettingsPrinting Printing Multiple Pages on One Sheet of Paper GraphicsScanning with USB Setting scan information in Scan ManagerScanning Scanning with networkIndex Macintosh 37 uninstall
Top Page Image Contents