Samsung CLX-3175FW, CLX-3175N Replacing the Fitted Plug for UK only, Approvals and Certifications

Page 10

REPLACING THE FITTED PLUG (FOR UK ONLY)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.

Contact the people from you purchased the machine.

The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.

Important warning:

You must earth this machine.

The wires in the mains lead have the following color code:

•Green and Yellow: Earth

•Blue: Neutral

•Brown: Live

If the wires in the mains lead do not match the colors marked in your plug, do the following:

You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green.

You must connect the blue wire to the pin which is marked with the letter “N” or colored black. You must connect the brown wire to the pin which is marked with the letter “L” or colored red. You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.

DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)

Approvals and Certifications

The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/ 68/EEC Directives of the European Union as of the dates indicated:

January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment.

January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic compatibility.

March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative.

EC Certification

Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)

This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries:

In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.

The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory notes contained in this document.

10_Safety information

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Multi Functional Printer Features of your new laser product Special FeaturesAbout this USER’S Guide Features by ModelsFeatures Convention Description ExampleOnline User’s Guide Quick Install GuideFinding More Information Printer Driver HelpImportant Safety Symbols and Precautions Safety informationWhat the icons and signs in this user’s guide mean Laser Safety Statement Power Saver Ozone SafetyMercury Safety RecyclingFAX Branding FCC Statement for Wireless LAN useUnited States of America Canadian Radio Interference RegulationsRinger Equivalence Number You should also know thatApprovals and Certifications Replacing the Fitted Plug for UK onlyDeclaration of Conformity European Countries EC CertificationEuropean States qualified under wireless approvals EEA/EFTA countriesWireless Guidance Regulatory Compliance StatementsOpenssl License Original Ssleay License14Safety information Safety information15 Contents Scanning by a network connection Printing a document Canceling a print job Sending a faxFax setup Receiving a faxBacking up data Solving other problemsPrinting from a USB memory device Managing USB memoryHow to purchase Fax problemsCommon Linux problems General specificationsMachine Overview IntroductionFront view Rear view Control Panel Overview Acknowledging the Status of the Toner Cartridge Understanding the Status LEDStatus Description Menu Overview Darkness SendingFeature Windows Linux Macintosh Printer Driver FeaturesContents Supplied SoftwareSetting UP the Hardware Getting startedMacintosh System RequirementsWindows LinuxUsing the SetIP program Setting UP the NetworkConfiguring network protocol via the machine Supported operating environmentsInstalling the Software Custom mode Using a Wireless NETWORKCLX-3175FW onlyWizard mode Hexadecimal Format Ascii FormatOperation Mode is Infrastructure Configuring wireless network from syncthru web serviceSelect Network NameSSID in Ssid Setup Operation Mode is Ad-hocMachines Basic Settings Entering characters using the number keypad Using the save modesAuto continue On the scanner glass Loading originals and print mediaLoading Originals ADFSelecting Print Media Specifications on print media Type Size Dimensions Weighta CapacitybGuidelines for special print media Media sizes supported in each modeMode Size Source Media Type GuidelinesPreprinted Changing the Size of the Paper in the Paper TrayPaper Slide the tray 1 back into the machine Printing on Special Print Materials Setting the Paper Size and TypeFeeding the print material manually Copying Changing the Settings for Each CopyCopying ID Card Copying Changing the Default Copy SettingsUsing Special Copy Features Up or 4-up copyingErasing background images Setting Copy TimeoutClone copying Gray enhance copyingScanning Basics Setting scan information in Samsung Scan ManagerScanning Scanning from the Control PanelScanning by a Network Connection Setting up an e-mail accountClick Machine Settings and User Authentication Scanning to EmailChanging the Default Scan Settings Changing the Settings for Each Scan JOBSetting UP Address Book Printing Address Book Searching with a particular first letterScanning Basic printing Canceling a Print JOBPrinting a Document Resolution Setting the fax headerAdjusting the document settings FaxingConfirming a transmission Sending a fax automaticallySending a fax manually Automatic redialingCanceling a delayed fax Sending a delayed faxAdding pages to a delayed fax Sending a priority faxReceiving a FAX Receiving faxes in memory Receiving in secure receiving modeActivating secure receiving mode Forwarding faxesForwarding received faxes to email address FAX SetupChanging the fax setup options Sending optionsPrinting sent fax report automatically Changing the default document settingsSetting up Address Book Speed dial numbersDeleting a Address Book entry Group dial numbersSearching Address Book for an entry Printing Address BookPlugging in a USB Memory Device Using USB memory deviceAbout USB Memory Scanning to a USB Memory DevicePrinting from a USB Memory Device Backing UP DataDeleting an image file Managing USB MemoryPrinting Directly from a Digital Camera Formatting a USB memory devicePrinting Reports MaintenanceAdjusting the Color Contrast Printing a reportCleaning the inside Cleaning Your MachineCleaning the outside Clearing MemoryMaintenance Cleaning the scan unit White sheet ADF Sheet Scanner glass Scanner lidToner cartridge storage Maintaining the CartridgeReplacing the Toner Cartridge Expected cartridge lifeMaintenance Replacing the Imaging Unit Replacing the Waste Toner Container Managing Your Machine from the Website Maintenance PartsTo access SyncThru Web Service Checking the MACHINE’S Serial NumberClearing Document Jams TroubleshootingTips for Avoiding Paper Jams Exit misfeedTray Clearing Paper JamsRoller misfeed Fuser unit areaPaper exit area Fuser leverTroubleshooting Meaning Suggested Solutions Understanding Display MessagesNot Assigned Page/Cancel Job Network ErrorOpen Heat Error Over Heat ErrorStop Pressed Stop/Clear has been Wrong ConfigPOP3 Continue or Black OnlyCondition Suggested Solutions Solving Other ProblemsPrinting problems Condition Possible Suggested Solutions CausePrinting quality problems White Spots Toner specksDropouts Vertical linesCopying problems Scanning problems Samsung Scan Manager problemsFax problems Common Windows problemsCommon Linux problems Scanners list Common Macintosh problemsNot appear on Not scanSupplies HOW to PurchaseOrdering supplies Type Average Yielda Part NumberSpecifications General SpecificationsScanner Specifications Printer SpecificationsCopier Specifications Facsimile Specifications Glossary EtherTalk ITU-T No chartEthernet Fuser UnitNetWare MAC addressModem OriginalsUNC Path Subnet MaskToner Cartridge WatermarkClock mode 31 control panel 21 copying IndexReceiving a fax Contact Samsung worldwide Country Customer Care Center WEB SiteSwitzerland Page Features of your new laser product CLX-3175 CLX-3175N Finding More Information Page Safety information6 7Safety information Safety information8 9Safety information Safety information10 11Safety information Safety information12 13Safety information Safety information14 15Safety information Setting up the network CLX-3175N only Installing the software Machines basic settingsScanning Basic Printing Using USB Memory Device Maintenance Troubleshooting CLX-3175N only Scan to StatusStop/Clear 57 to solve the problem Reduce/Enlarge Change Default USB feature Machine Setup Supplied Software Getting started System Requirements Setting UP the Network CLX-3175N only Installing the Software Key sound, and alarm sound Getting started Loading originals and print media Specifications on print media Printer specifications on page 69. The extra flaps Changing the Size of the Paper in the Paper Tray Slide the tray 1 back into the machine Printing on Special Print Materials Copying Press OK when Copy Feature appears Setting Copy Timeout Scanning Changing the Settings for Scan JOB Scanning Basic printing Using USB memory device Printing from a USB Memory Device Managing USB Memory Maintenance Cleaning Your Machine Cleaning the scan unit Maintaining the Cartridge Replacing the Toner Cartridge Replacing the Imaging Unit Replacing the Waste Toner Container Maintenance Parts Clearing paper jams Solving other problems Paper exit area Fuser lever Understanding Display Messages Expires soon Replaceables on 53 and call for Service Solving Other Problems 50. If this does not improve the print White spots appear on AaBbC Scanned face down on the scanner glass Samsung Scan Manager problems Come out Common Macintosh problems Ordering supplies Yieldc.d Waste toner Copying mode Less than 50 dBAContainerc,d Memory Network Scanb File format Effective Glossary FDI LED TCP/IP Adjustment Contact Samsung worldwide Switzerland Page REV Software section Contents Sharing the Printer Locally Using Your Printer in Linux Installing Software for Local Printing Installing Printer SoftwareSelect Typical installation for a local printer. Click Next Custom Installation Select Custom installation. Click NextInstalling Printer Software in Windows Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Removing Printer Software Installing mono printer driverClick OK in the Install From Disk window NextPrinting a Document Select your printer driver from the Name drop-down listPrinting to a file PRN Printer SettingsSelect Printers and Faxes Select your printer driver icon Layout Tab Paper TabColor Mode Graphics TabExtras Tab Using a Favorite SettingUsing Help About TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Double-clickPrinters and FaxesUninstalling Samsung SmarThru Scanning Using Samsung SmarThruUsing Samsung SmarThru Using Onscreen Help File Windows XP Scanning Process with TWAIN- enabled SoftwareScanning Using the WIA Driver Windows VistaUsing Smart Panel Understanding Smart PanelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Installing the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using SetIP programUsing the Unified Driver Configurator Starting the programPrinters Configuration Scanners ConfigurationConfiguring Printer Properties Ports ConfigurationPrinting from Applications Printing FilesScanning a Document Click PropertiesUsing the Image Manager Adding Job Type SettingsTools Function Select Easy Install and click Install. Easy Install is Installing SoftwareUninstalling software Select Uninstall and click UninstallClick Add on the Printer List Setting Up the PrinterFor a Network-connected Select Socket/HP Jet Direct in Printer TypeFor a USB-connected Printing Changing Printer SettingsPrinting a Document Printing Multiple Pages on One Sheet of Paper GraphicsScanning with USB Setting scan information in Scan ManagerScanning Scanning with networkIndex Macintosh 37 uninstall
Top Page Image Contents