Samsung CLX-3175FW, CLX-3175FN, CLX-3175N, CLX-3170FN manual Common Linux problems

Common Linux problems

CONDITION	SUGGESTED SOLUTIONS
The machine does	• Check if the printer driver is installed in your
not print.	system. Open Unified Driver configurator
	and switch to the Printers tab in Printers
	configuration window to look at the list of
	available printers. Make sure that your
	machine is displayed on the list. If not, invoke
	Add new printer wizard to set up your device.
	• Check if the printer is started. Open Printers
	configuration and select your machine on the
	printers list. Look at the description in the
	Selected printer pane. If its status contains
	“(stopped)” string, press the Start button.
	After that normal operation of the printer
	should be restored. The “stopped” status
	might be activated when some problems in
	printing occurred. For instance, this could be
	an attempt to print document when port is
	claimed by a scanning application.
	• Check if the port is not busy. Since functional
	components of MFP (printer and scanner)
	share the same I/O interface (port), the
	situation of simultaneous access of different
	“consumer” application to the same port is
	possible. To avoid possible conflicts, only
	one of them at a time is allowed to gain
	control over the device. The other
	“consumer” will encounter “device busy”
	response. You should open ports
	configuration and select the port assigned to
	your printer. In the Selected port pane you
	can see if the port is occupied by some other
	application. If this is the case, you should
	wait for completion of the current job or
	should press Release port button, if you are
	sure that the present owner is not functioning
	properly.
	• Check if your application has special print
	option such as “-oraw”. If “-oraw” is specified
	in the command line parameter then remove
	it to print properly. For Gimp front-end, select
	“print” -> “Setup printer” and edit command
	line parameter in the command item.
	• The CUPS (Common Unix Printing System)
	version distributed with SuSE Linux 9.2
	(cups-1.1.21) has a problem with ipp
	(Internet Printing Protocol) printing.Use the
	socket printing instead of ipp or install later
	version of CUPS (cups-1.1.22 or higher).
Some color images	This is a known bug in Ghostscript (until GNU
come out all black.	Ghostscript version 7.05) when the base color
	space of the document is indexed color space
	and it is converted through CIE color space.
	Because Postscript uses CIE color space for
	Color Matching System, you should upgrade
	Ghostscript on your system to at least GNU
	Ghostscript version 7.06 or later. You can find
	recent Ghostscript versions at
	www.ghostscript.com.

CONDITION	SUGGESTED SOLUTIONS
Some color images	This is a known bug in Ghostscript (until GNU
come out in	Ghostscript version 7.xx) when the base color
unexpected color.	space of the document is indexed RGB color
	space and it is converted through CIE color
	space. Because Postscript uses CIE color
	space for Color Matching System, you should
	upgrade Ghostscript on your system to at least
	GNU Ghostscript version 8.xx or later. You can
	find recent Ghostscript versions at
	www.ghostscript.com.
The machine does	It is a known problem that occurs when a color
not print whole pages	printer is used on version 8.51 or earlier of
and its output is half	Ghostscript, 64-bit Linux OS, and reported to
page printed.	bugs.ghostscript.com as Ghostscript Bug
	688252.
	The problem is solved in AFPL Ghostscript v.
	8.52 or above. Download the latest version of
	AFPL Ghostscript from http://sourceforge.net/
	projects/ghostscript/ and install it to solve this
	problem.
I cannot scan via	• Check if Gimp Front-end has “Xsane: Device
Gimp Front-end.	dialog.” on the “Acquire” menu. If not, you
	should install Xsane plug-in for Gimp on the
	your computer. You can find Xsane plug-in
	package for Gimp on Linux distribution CD or
	Gimp home page. For the detail information,
	refer to the Help for Linux distribution CD or
	Gimp Front-end application.
	If you wish to use other kind of scan application,
	refer to the Help for application.
I encounter error	Avoid changing print job parameters (via LPR
“Cannot open port	GUI, for example) while a print job is in
device file” when	progress. Known versions of CUPS server
printing a document.	break the print job whenever print options are
	changed and then try to restart the job from the
	beginning. Since Unified Linux Driver locks port
	while printing, the abrupt termination of the
	driver keeps the port locked and therefore
	unavailable for subsequent print jobs. If this
	situation occurred, try to release the port.

Troubleshooting_ 83