Making a copy
If you want to save ink while copying or receiving a fax, see "Copying/receiving in Ink Save mode" on page 1.8.
1Turn the page face down and insert it into the document feeder.
2Adjust the document guide to match the width of the docu- ment.
3Feed the document into the machine.
4Adjust the resolution by pressing Resolution.
5Press Start Copy.
Document Guide
• The display shows Number of Copies.
6Enter the number of copies you want, and press OK.
•The display shows Zoom Rate.
•If you want one copy without specific copy options, you can press Start Copy again at this time, and copying will start immediately.
7Select the zoom rate you want by pressing Scroll buttons, and then press OK.
•You can scale the document from 50% to 150% by selecting a
8Choose if you want to collate document.
•When collation is selected, you need to select the sorting order; Normal, Reverse.
9Press OK when all options have been selected.
•When the machine runs out of paper, Load paper and press OK appears in the display. Supply additional paper and press
OK.
Setting date and time
The current date and time are shown in the display when the machine is on and ready for use (Standby Mode). The date and time will be printed on all faxes you send.
1Press Menu.
2Press Scroll buttons to choose SET DATE & TIME and press OK.
3Press OK when the display shows Date Format.
4Press Scroll buttons to select either
5Press OK when the display shows Date & Time.
6Set the date and time. You can move the cursor by pressing Scroll buttons.
•If you enter an invalid number, the machine beeps and doesn’t proceed to the next step. If this happens, just
•When entering the hour, you should enter it in
7Press OK when the date and time appear correctly.
•The display shows the date and time you have set, then returns to Standby Mode.
1.6