Samsung SF-360 Series Option Suboption, Used for less ink consumption. It toggles On and Off

Option

Suboption

Ink Save

Used for less ink consumption. It toggles On and Off.

Silent Mode

Used when you want to turn off all sounds made by the machine.

Language

The LCD Language setting determines the language of the text that appears on the control panel display

and information printing.

Sending Confirm

A confirmation report shows whether the transmission was successful or not, how many pages were

sent, etc. Choose ON to print a confirmation report automatically each time you send a fax. Choose OFF

not to print whatever the result is. Choose ERROR to print only when an error occurs, and the transmis-

sion was unsuccessful. Note that a confirmation report of a memory transmission includes the Image

TCR (Transmission Confirmation Report) which shows the image of the first page with the various

information depending on the value you made as described in "Image TCR" on page 6.11

Paper Size

Select the paper size you will use for fax receive, and copying.

Auto Reduction

When receiving a document as long as or longer than the paper loaded, the machine can reduce the data

to fit your paper. If the fax machine cannot fit the data into one page with the feature enabled, the data is

divided and printed in actual size on two or more sheets.

Discard Size

If you turn the Automatic Reduction feature off, you can set the fax machine to discard any excess

image at the bottom of the page when receiving a document as long as or longer than the paper loaded in

your machine. If the incoming fax is out of the margin you have set, it will be printed on two sheets of

paper. Enter the desired Discard Size in millimeter.

Rings To Answer

You can select the number of rings before answering an incoming call. If you are using your machine as

both a telephone and a fax machine, we suggest you set the ring count to at least 4 to give you time to

answer.

Rcv. Start Codea

The Rcv. Start Code (Remote Receive Start Code) allows you to start fax receive from an extension phone

plugged into the EXT socket (except SF-365TP) or equivalent. If you pick up the extension phone and

hear a fax tone, press the Rcv. Start Code then the fax will start receiving. The code is preset to *9* at the

factory. Enter the desired code from 0 to 9.

ECM Modeb

This mode compensates for poor line quality and ensures accurate, error- free transmission with any

other ECM-equipped facsimile machine. If the line quality is poor, transmission time may be increased

when ECM is enabled.

Send From Memory

This determines how to transmit the document manually. If it is on, the machine will scan documents

into memory and then send a fax. If it is off, the machine will first dial and send.

Caller IDc,e

You can see the number of the person calling you. Before using the Caller ID feature, Caller ID service

must be installed on your telephone line by the telephone company. For more information, see "Using

Caller ID" on page 6.2.

Short Messagec,e

You can use the short message service. Before using the Short Message service, it must be installed on

your telephone line by the telephone company. For more information, see "Using Short Message Service

(SMS)" on page 6.6.

Set Junk Fax No.

You can prohibit your machine from uncertified or unwanted junk faxes like spam mail. To add a num-

ber as a junk fax you should have at least one Caller ID detected by the machine. Even though you have

added junk fax numbers, if you turned off the Caller ID option above, the Junk Fax protection will be

removed. For more information, see "Registering/deleting the junk fax numbers" on page 6.5.

Auto Journal

A journal report shows the specific information concerning transmission or reception

activities, the time and date of most recent 40 transmissions or receptions.