Option | Suboption |
|
|
|
|
DRPD Moded | DRPD (Distinctive ring) is a service provided by some telephone companies that assigns two phone |
| numbers to one phone line, each of which makes your phone ring differently. If you subscribe to this |
| service, you can program your machine to learn one phone number and distinctive ring for incoming |
| faxes. |
| As the display shows, call this fax from other fax machine. The machine will learn the ring pattern and |
| displays DRPD OK when finished. Now, you can use the Rcv.Mode/Darkness to select DRPD receiving |
| mode. |
|
|
Remote Test | This lets the service center check the status of your machine to find out if there is anything wrong. |
|
|
Resolution | Sets the default resolution when copying and faxing. |
|
|
Darkness | Sets the default contrast when copying and faxing. |
|
|
Image TCR | You can prevent the Image TCR from being included in the confirmation report for privacy or security |
| protection. |
|
|
Dial Modee | Set the dialling mode to the type of the exchange to which you are connected. |
Behind PABXe | If your machine is connected to the line from PABX (Private Automatic Branch eXchange), you need to |
| enable this option by selection On. |
|
|
a.
b.Error Correction Mode
c.This option may not work when connected to a PABX. d.Distinctive Ring Pattern Detection
e.One or more options may not appear in the display depending on your country. If so, it is not applicable to your machine.
TAM options (SF-365TP only)
Options | Suboption |
|
|
|
|
Save Charge | Lets you dial into your machine from a remote phone and check whether anyone has left a message with- |
| out being charged. When Save Charge is On, the machine answers your call on the number of rings you |
| have specified in the Rings to Answer option. If there is no message, the machine answers on the second |
| ring after the number of Rings to Answer. This gives you time to hang up the phone before the machine |
| answers and saves the price of the call. |
|
|
Call Monitor | Enables you to hear callers leave messages on your machine. |
|
|
ICM Record Time | You can select the maximum time allowed for caller messages. |
|
|
Remote Password | You can change the |
| password is preset to “#139#” at the factory. The first and the last #’s are fixed, but you can change the |
| three middle numbers. |
|
|
Silence Action | In TAM mode, the machine decides the next action when silence is detected for 10 seconds. Available |
| suboptions are: |
| • Receive Fax: Switches to FAX Receive Mode. |
| • Record Silence: Keeps the recording silent. |
| • Disconnect: Disconnects the line and returns to Standby Mode. |
|
|
Howler Action | In TAM mode, the machine decides the next action when a howling is detected for 9 seconds. Available |
| suboptions are: |
| • Record Howler: Disregards howling. |
| • Disconnect: Disconnects the line and returns to Standby Mode. |
|
|
Message Forward | Forwards a message to your new location whenever a caller leaves a message. For more information, see |
| "Message forwarding |
|
|
6.11
SPECIAL | FEATURES |
|
|
SPECIAL | FEATURES |
SPECIAL | FEATURES |