Mitsubishi Electronics HS-HD2000U manual Loading a Tape, Playing a Tape

Page 16

Playback

Loading a Tape

Tapes can be loaded into your VCR as long as the VCR is plugged in. Even when the VCR POWER is off, loading a tape will automatically turn the VCR on. Use

only tapes that have a , or label.

1Hold the tape so that the long narrow edge with the contents label faces you. The other edge is hinged and should face the VCR. The plastic window that shows the videotape should face up.

2Gently insert the tape evenly into the cassette slot until the VCR automatically takes it in.

If the VCR will not automatically take the tape in, press EJECT and try again.

Your VCR will eject the tape if it is loaded improperly. If the VCR ejects the tape, remove the tape, check to see that the contents label is facing you, that the geared tape reels are facing down, wait a few seconds, and try again.

Playing a Tape

Playing a Tape Recorded in D-VHS Format

1When you connect an integrated HDTV or IEEE 1394-equipped HDTV receiver which is capable of controlling the VCR:

Operate your TV or receiver to playback the tape. Refer to the TV or receiver ownerÕs guide for this procedure.

When you connect an integrated HDTV or IEEE 1394-equipped HDTV receiver which is not capable of controlling the VCR:

Set the connection setting of your TV or receiver to select the HS-HD2000U. Refer to the TV or receiver ownerÕs guide for this procedure.

And then press PLAY on the front panel or the remote control of the VCR.

You can stop playing by pressing STOP.

It will take a few seconds to display the playback picture. A mosaic noise, still or black picture will appear until the correct picture comes on. When the VCR reaches the end of the tape, it will automatically rewind to the beginning of the tape and stop.

When you playback the end of a recording, the point where the recording mode changes or a broken part of the tape, a mosaic noise, still or black picture may appear.

The tape recorded in D-VHS format on other VCR may not be played back cor- rectly on this VCR.

Playing a Tape Recorded in Analog (S-VHS/S-VHS ET/VHS) Format

1Press PLAY on the front panel or the remote control.

The VCR will automatically play the tape at the correct speed. When the VCR reaches the end of the tape, it will automatically rewind to the beginning of the tape and stop.

You can stop playing by pressing STOP.

CORRECT

INCORRECT

PLAY

STOP

PLAY STOP

14

Image 16

Contents Video Cassette Recorder Ownerõs Guide Special Features HS-HD2000U Refer Servicing to Qualified Service PersonnelShortcuts Cleaning AccessoriesPower Sources Read InstructionsPower Lines Replacement PartsSafety Check OverloadingUnpacking Your VCR Hooking Up Your VCRChoosing a Hookup Antenna or Cable System with Cable Box Antenna or Cable System without Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Connections to Satellite Receiver OptionalConnections to Home Theater Receiver Connections to IR Emitter Playback Connection listTV with Audio/Video Inputs Displaying 1394 connection listOperating Your Remote Control Installing the BatteriesOperating the VCR with the Remote Control PlaybackLoading a Tape Playing a TapePlaying a Tape Recorded in D-VHS Format Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Using ALLSETª to Set Up Your VCR AutomaticallyIf you choose Cable or Indoor/outdoor ant Setting Up Your VCRIf you choose Cable box only or Digital cable box only Cancel NBC Satellite Receiver Control OFFAdding and Deleting Channels ÅSet the clock ÇAdd/delete channelsSelecting a Channel Digital cable boxSelecting antenna, cable or digital cable channels directly Selecting satellite channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄMonth REC Recording Recording copy protected digital programsSP/EP Input Channel If you program too much time into the OTR timer Using One-Touch Recording OTRHow OTR affects other controls Using Standby One-Touch Recording OTR2 To cancel OTR2Channel on the cable box How OTR2 affects other controlsRecording Format Recording ModeRecording Time Using S-VHS Set-Up Menu Selecting Recording FormatIf you use S-VHS tape for recording If you use VHS tape for recordingSelecting S-input Setting Using S-throughUsing Audio and Video Functions Descriptions of Audio FunctionsAudio monitor Listen to Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions Timer Recording VHS Timer RecordingTimer Recording When you program both the D-VHS and analog timer recordingCH DAY on OFF Conventional VCR Timer Recording Cancelling a Recording in Progress Changing while ProgrammingVCR Plus+ System Programming Using the On Screen Display VCR Plus+¨ System ProgrammingVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Auto Speed Programming Program CautionProgram Skip Using Menus Program Skip Using the Power ButtonChanging Timer Recording Settings TV Programs that End on the Day AfterUsing a Satellite Receiver Cancelling a Timer Recording before the Recording StartsMemory Backup Editing Features Copying a Tape from D-VHS to D-VHSEditing Features Copying a Tape from D-VHS to AnalogUsing the HS-HD2000U to Record from Another VCR Copying a Tape from Analog to AnalogUsing the HS-HD2000U to Playback to Another VCR RecordingAdvanced Playback Controls for analog playback only Advanced FeaturesSpecial Effects Adjusting the Tracking Advanced FeaturesTime Counter Searching TechniquesQuick search CM skip Speed searchCounter zero stop Index searchAutomatic index marks Manual index marksRepeat playback Search to blankTo make the time gauge and the remaining time appear Customize Choices Menu Displaying the Current TimeVideo mute Auto power save auto-off Setting up PerfecTape¨RF converter PerfecTape¨Using PerfecTape¨ manually Using PerfecTape¨ automaticallyRentalXpress Search with Picture Using the remote control to operate your TV Setting up your remote control to operate your TVOperating your TV with the HS-HD2000U remote control Advanced OptionsTo program the remote control operational setting When you wish to operate the other VCRChild Lock To program the HS-HD2000U and the remote to VCR-BRemote Control Location of ControlsLocation of Controls Remote Control -- Flip cover open Remote Control LCD Liquid Crystal DisplayTransfer indicator Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks Important Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex VHSPage Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call