Mitsubishi Electronics HS-HD2000U manual Using Standby One-Touch Recording OTR2, To cancel OTR2

Page 32

Recording

Using Standby One-Touch Recording (OTR2)

Standby One-Touch Recording (also called OTR2) is a programming method to begin recording within the next 24 hours and record in 30 minutes intervals. Before you use OTR2, make sure the clock has been set correctly.

1Load a tape with its erasure prevention tab intact into the VCR.

2

Select the recording format. See Selecting Recording Format on page 32.

 

3

Select the speed at which you would like to record by pressing SP/EP on the

 

 

remote control or on the front panel.

 

4

Set the VCRÕs input to tuner by pressing INPUT until a channel number is

CHANNEL

 

shown on-screen or on the front panel display. If L1 or L2 appears instead of a channel number, continue to press INPUT until a channel number appears. To record channels from a PRIMESTAR¨ receiver, press INPUT until a channel

number with the PRIMESTAR light () appears on the front panel display.

1START TIME

2REC LENGTH

SP/EP

INPUT

5Press CHANNEL or the number buttons on the remote or the front panel jog dial to choose the channel to be recorded. If you are using a cable box that the VCR does not control, select channel 3 or 4 on the VCR, and change the

channel on the cable box.

SP/EP

 

 

 

6Press PAUSE/%START TIME on the front panel or OTR 2/%START TIME on the remote to set the time when you wish recording to start (within 24 hours).

The start time is displayed on the front panel. The first time display is the next half-hour increment from the current time. For example, if it is currently 2:15, 2:30 (next half-hour increment) will be displayed. Similarly, if it is currently 2:40, 3:00 (again, the next half-hour increment) will be displayed. Each time you press the button, the start time is delayed by 30 minutes.

7Press REC/úREC LENGTH or OTR 2/úREC LENGTH on the remote for each additional 30 minutes you want to add to the OTR2 timer, up to 4 hours. If you see End on the front panel display, the VCR will record until the end of the tape.

If you have a cable box, a digital cable box, a PRIMESTAR¨ or a DISH NetworkTM satellite receiver, leave the cable box or receiver turned ON. If the HS-HD2000U does not control your cable box, leave the box tuned to the station you wish to record.

After 30 seconds, the power will turn off and the programmed recording light will be lit. The VCR will automatically turn on at the OTR2 start time and recording will begin. When the OTR2 timer reaches zero, the VCR will stop recording and turn off automatically. If the end of the tape is reached before OTR2 is finished, the VCR will stop and the power will turn off.

IMPORTANT

Other programs you have set to record may be erased if:

¥the start times are before the OTR2 start time

¥conflicts with the OTR2

¥starts within one minute or less after the OTR2 finishes

If you turn the power on while your VCR is in stand-by for the OTR2, the OTR2 programming will be erased.

To cancel OTR2

¥Turn the power OFF while you are programming the timer.

¥Turn the power ON if you have finished programming the timer.

How OTR2 affects other controls

If you press REC/úREC LENGTH on the front panel during OTR2 recording, 30 minutes will be added to the OTR2 timer. If you press STOP during OTR2 record- ing, you erase the OTR2 programming.

JOG/CHANNEL

PAUSE

REC

1 START TIME

2 REC LENGTH

SP

OTR2 CH

PM

PROG REC

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Video Cassette Recorder Ownerõs Guide Special Features HS-HD2000U Refer Servicing to Qualified Service PersonnelShortcuts Cleaning AccessoriesPower Sources Read InstructionsPower Lines Replacement PartsSafety Check OverloadingChoosing a Hookup Hooking Up Your VCRUnpacking Your VCR Hooking Up Your VCR Antenna or Cable System without Cable BoxAntenna or Cable System with Cable Box Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Connections to Satellite Receiver OptionalConnections to Home Theater Receiver Connections to IR Emitter Playback Connection listTV with Audio/Video Inputs Displaying 1394 connection listOperating Your Remote Control Installing the BatteriesOperating the VCR with the Remote Control PlaybackLoading a Tape Playing a TapePlaying a Tape Recorded in D-VHS Format Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Using ALLSETª to Set Up Your VCR AutomaticallyIf you choose Cable box only or Digital cable box only Setting Up Your VCRIf you choose Cable or Indoor/outdoor ant Cancel NBC Satellite Receiver Control OFFAdding and Deleting Channels ÅSet the clock ÇAdd/delete channelsSelecting a Channel Digital cable boxSelecting antenna, cable or digital cable channels directly Selecting satellite channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄMonth REC Recording Recording copy protected digital programsSP/EP Input Channel How OTR affects other controls Using One-Touch Recording OTRIf you program too much time into the OTR timer Using Standby One-Touch Recording OTR2 To cancel OTR2Channel on the cable box How OTR2 affects other controlsRecording Time Recording ModeRecording Format Using S-VHS Set-Up Menu Selecting Recording FormatIf you use S-VHS tape for recording If you use VHS tape for recordingSelecting S-input Setting Using S-throughUsing Audio and Video Functions Descriptions of Audio FunctionsAudio monitor Listen to Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions Timer Recording VHS Timer RecordingTimer Recording When you program both the D-VHS and analog timer recordingCH DAY on OFF Conventional VCR Timer Recording Cancelling a Recording in Progress Changing while ProgrammingVCR Plus+ System Programming Using the On Screen Display VCR Plus+¨ System ProgrammingVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Auto Speed Programming Program CautionProgram Skip Using Menus Program Skip Using the Power ButtonChanging Timer Recording Settings TV Programs that End on the Day AfterMemory Backup Cancelling a Timer Recording before the Recording StartsUsing a Satellite Receiver Editing Features Copying a Tape from D-VHS to D-VHSEditing Features Copying a Tape from D-VHS to AnalogUsing the HS-HD2000U to Record from Another VCR Copying a Tape from Analog to AnalogUsing the HS-HD2000U to Playback to Another VCR RecordingSpecial Effects Advanced FeaturesAdvanced Playback Controls for analog playback only Adjusting the Tracking Advanced FeaturesTime Counter Searching TechniquesQuick search CM skip Speed searchCounter zero stop Index searchAutomatic index marks Manual index marksTo make the time gauge and the remaining time appear Search to blankRepeat playback Video mute Displaying the Current TimeCustomize Choices Menu Auto power save auto-off Setting up PerfecTape¨RF converter PerfecTape¨RentalXpress Using PerfecTape¨ automaticallyUsing PerfecTape¨ manually Search with Picture Using the remote control to operate your TV Setting up your remote control to operate your TVOperating your TV with the HS-HD2000U remote control Advanced OptionsTo program the remote control operational setting When you wish to operate the other VCRChild Lock To program the HS-HD2000U and the remote to VCR-BRemote Control Location of ControlsLocation of Controls Remote Control -- Flip cover open Remote Control LCD Liquid Crystal DisplayTransfer indicator Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks Important Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex VHSPage Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call
Top Page Image Contents