Mitsubishi Electronics HS-HD2000U manual Using S-VHS Set-Up Menu, Selecting Recording Format

Page 34

Recording

Using S-VHS Set-Up Menu

Selecting Recording Format

When recording in analog, the HS-HD2000U allows you to choose between recording in standard VHS or Super VHS (S-VHS) when you use an S-VHS tape. If you use a VHS tape, you can choose to record in S-VHS ET (Expansion Technol- ogy) mode or VHS. S-VHS ET mode allows you to record in S-VHS format on a VHS tape. Though the picture quality of S-VHS ET mode will not be as clear as that of the S-VHS format, you can record or playback with a higher picture quality than VHS format.

1Press MENU on the remote control. VCR Main Menu appears.

2Turn the ADJUST dial on the remote control to select S-VHSSet-Up. Turn the SHUTTLE ring to the right.

If you use S-VHS tape for recording:

3Turn the ADJUST dial to select S-VHS record.

4Turn the SHUTTLE ring to the right to select the recording format.

¥select AUTO if you want to record in S-VHS.

¥select OFF if you want to record in VHS.

5Press MENU twice to exit the menus.

If you use VHS tape for recording:

3Turn the ADJUST dial to select S-ET record.

4Turn the SHUTTLE ring to the right to select the recording format.

¥select OFF if you want to record in VHS.

¥select ON if you want to record in S-VHS ET.

¥AUTO will make the VCR automatically select VHS or S-VHS-ET as a result of the PerfecTape¨ function. See page 61 for the PerfecTape¨.

5Press MENU twice to exit the menus.

During playback, the VCR automatically selects the recorded format/mode.

¥The S-VHS light on the front panel display will light up during the playback with the tape recorded in S-VHS.

¥The S-VHS ET light on the front panel display will light up during the playback with the tape recorded in S-VHS ET.

IMPORTANT

For the best quality recording, use S-VHS tapes and record in the S-VHS format.

The quality of S-VHS ET recordings will vary by the quality of VHS tapes used. For the best quality S-VHS ET recordings, it is recommended that you use HG (high grade) tapes.

S-VHS recordings can be played on:

¥S-VHS VCRs

¥VHS VCRs with S-VHS Quasi playback capabilities

S-VHS ET recording can be played on:

¥S-VHS VCRs (not all S-VHS VCRs will be able to play S-VHS ET)

¥VHS VCRs with S-VHS Quasi playback capabilities

Please use this VCR or S-VHS VCR with S-VHS ET mode to playback the tape recorded in S-VHS ET for better picture quality.

»VCR Main Menu￿

ÂProgram to record￿ Ä1394 connection list￿ ÃCustomize choices￿ ÈS-VHSSet-Up￿ ÄFirst Time Set-Up￿

￿

Use￿ ADJUST to select,￿ and ENTER.￿

Press MENU to exit menus

ÈS-VHS Set-Up￿

 

￿

ÄS-VHS record

 

(AUTO)

ÄS-ET record

 

(OFF)￿

ÄFront S-input

(OFF)￿

ÄRear S-input

(OFF)￿

ÄRear S-through

(OFF)￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿

Use ADJUST to select,￿ and ENTER to change.￿ Press MENU to go back.

ÈS-VHS Set-Up￿

 

￿

ÄS-VHS record

(OFF )

ÄS-ET record

 

(ON )￿

ÄFront S-input

(OFF)￿

ÄRear S-input

(OFF)￿

ÄRear S-through

(OFF)￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿

Use ADJUST to select,￿ and ENTER to change.￿ Press MENU to go back.

32

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Video Cassette Recorder Ownerõs Guide Special Features HS-HD2000U Refer Servicing to Qualified Service PersonnelShortcuts Power Sources CleaningAccessories Read InstructionsSafety Check Power LinesReplacement Parts OverloadingUnpacking Your VCR Hooking Up Your VCRChoosing a Hookup Antenna or Cable System with Cable Box Antenna or Cable System without Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Connections to Satellite Receiver OptionalConnections to Home Theater Receiver Connections to IR Emitter TV with Audio/Video Inputs PlaybackConnection list Displaying 1394 connection listOperating the VCR with the Remote Control Operating Your Remote ControlInstalling the Batteries PlaybackPlaying a Tape Recorded in D-VHS Format Loading a TapePlaying a Tape Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Using ALLSETª to Set Up Your VCR AutomaticallyIf you choose Cable or Indoor/outdoor ant Setting Up Your VCRIf you choose Cable box only or Digital cable box only Cancel NBC Satellite Receiver Control OFFAdding and Deleting Channels ÅSet the clock ÇAdd/delete channelsSelecting antenna, cable or digital cable channels directly Selecting a ChannelDigital cable box Selecting satellite channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄMonth REC Recording Recording copy protected digital programsSP/EP Input Channel If you program too much time into the OTR timer Using One-Touch Recording OTRHow OTR affects other controls Channel on the cable box Using Standby One-Touch Recording OTR2To cancel OTR2 How OTR2 affects other controlsRecording Format Recording ModeRecording Time If you use S-VHS tape for recording Using S-VHS Set-Up MenuSelecting Recording Format If you use VHS tape for recordingSelecting S-input Setting Using S-throughAudio monitor Listen to Using Audio and Video FunctionsDescriptions of Audio Functions Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions Timer Recording VHS Timer RecordingTimer Recording When you program both the D-VHS and analog timer recordingCH DAY on OFF Conventional VCR Timer Recording Cancelling a Recording in Progress Changing while ProgrammingVCR Plus+ System Programming Using the On Screen Display VCR Plus+¨ System ProgrammingVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Auto Speed Programming Program CautionChanging Timer Recording Settings Program Skip Using MenusProgram Skip Using the Power Button TV Programs that End on the Day AfterUsing a Satellite Receiver Cancelling a Timer Recording before the Recording StartsMemory Backup Editing Features Copying a Tape from D-VHS to D-VHSEditing Features Copying a Tape from D-VHS to AnalogUsing the HS-HD2000U to Record from Another VCR Copying a Tape from Analog to AnalogUsing the HS-HD2000U to Playback to Another VCR RecordingAdvanced Playback Controls for analog playback only Advanced FeaturesSpecial Effects Time Counter Adjusting the TrackingAdvanced Features Searching TechniquesQuick search CM skip Speed searchAutomatic index marks Counter zero stopIndex search Manual index marksRepeat playback Search to blankTo make the time gauge and the remaining time appear Customize Choices Menu Displaying the Current TimeVideo mute RF converter Auto power save auto-offSetting up PerfecTape¨ PerfecTape¨Using PerfecTape¨ manually Using PerfecTape¨ automaticallyRentalXpress Search with Picture Operating your TV with the HS-HD2000U remote control Using the remote control to operate your TVSetting up your remote control to operate your TV Advanced OptionsChild Lock To program the remote control operational settingWhen you wish to operate the other VCR To program the HS-HD2000U and the remote to VCR-BRemote Control Location of ControlsTransfer indicator Location of Controls Remote Control -- Flip cover openRemote Control LCD Liquid Crystal Display Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks Important Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex VHSPage Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call
Top Page Image Contents