Advanced Features
Auto power save (auto-off)
When the Auto Power Save feature is turned on, the VCR will automatically turn off after remaining idle for 30 minutes. If a control, such as a menu function or chan- nel selection, is used or if there is a tape playing or being recorded, the VCR will remain on.
3Complete steps 1 and 2 on the previous page. Customize choices menu appears. Use the ADJUST dial to select Auto power save. Turn the SHUTTLE ring to the right to set to ON.
4Press MENU twice to exit the menus.
IMPORTANT
When viewing analog broadcast stations through the VCR, 3minutes>Power off will appear on the TV screen three minutes before the VCR power turns off. The display will count down the number of minutes until the VCR turns off. If you want to continue using the VCR, press any of the buttons.
RF converter
If your TV has audio and video inputs, turn the RF converter OFF. If your TV does not have audio and video inputs, keep the RF converter set to ON. It is preset by the factory to ON.
3Complete steps 1 and 2 on the previous page. Customize choices menu appears. Use the ADJUST dial to select RF converter. Turn the SHUTTLE ring to the right to select ON or OFF.
4Press MENU twice to exit the menus.
IMPORTANT
If the RF converter is set to ON, you arenÕt required to press VCR/TV to play a tape or to use VCR menus. The VCR light will automatically light up when you press PLAY or MENU. Be sure to set the TV to the video channel (see page 13).
PerfecTape¨
PerfecTape¨ is an exclusive Mitsubishi feature that tests the quality of video tapes you will record on. After each test, the VCR will adjust its internal circuitry in order to make the best possible recording on your tape.
setting up PerfecTape¨
You can set up PerfecTape¨ to function two ways.
If you want the VCR to automatically test any
If you do not want the VCR to automatically test tapes, select MANUAL. PerfecTape¨ will now function only when you start a test. Any tape with the erasure prevention tab intact can be manually tested.
It will not automatically test recorded tapes Ð you must choose to test those your- self.
3Complete steps 1 and 2 on the previous page. Customize choices menu appears. Use the ADJUST dial to select PerfecTape.
4Turn the SHUTTLE ring to the right to set PerfecTape to AUTO or MANUAL.
5Press MENU twice to exit the menus.
|
|
|
|
|
|
|
| ÃCustomize choices | |||
|
| ÄVideo mute | (ON ) | ||
|
| ÄAuto power save | (ON ) | ||
|
| ÄRF converter | (OFF) | ||
|
| ÄPerfecTape | (AUTO) | ||
|
| Go to next page ¤ | |||
|
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | |||
Use ADJUST to select, |
|
| |||
|
| and ENTER to change. |
|
| |
|
| Press MENU to go back. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| ÃCustomize choices | ||||
| ÄVideo mute | (ON ) | |||
| ÄAuto power save | (OFF) | |||
| ÄRF converter |
| (ON ) | ||
| ÄPerfecTape |
| (AUTO) | ||
| Go to next page ¤ | ||||
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||
| Use ADJUST to select, |
|
| ||
| and ENTER to change. |
|
| ||
| Press MENU to go back. |
|
| ||
|
|
|
|
|
|
|
|
|
|
ÃCustomize choices | |||
ÄVideo mute | (ON ) | ||
ÄAuto power save | (OFF) | ||
ÄRF converter | (OFF) | ||
ÄPerfecTape |
| (AUTO) | |
Go to next page ¤ | |||
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | |||
Use ADJUST to select, |
| ||
and ENTER to change. |
| ||
Press MENU to go back. |
| ||
61