Recording
Selecting and Adjusting the Audio and Video Functions
1If you set your remote control to be able to operate Mitsubishi televisions by code button 1, make sure that the VCR/TV slide switch is set to VCR position. See Using the Remote Control to Operate your TV on page 64.
2Press VIDEO repeatedly until the function you want to adjust appears.
audio and video function menu
VCR
Listen to: Stereo
Use ADJUST to select
3Turn the ADJUST dial on the remote to adjust the setting. The functions will disappear if you do not press any buttons for 5 seconds.
When you set your remote control to be able to operate Mitsubishi televisions by code button 1:
The TV audio function will appear when you press TV AUDIO on the
The TV video function will appear when you press VIDEO on the
setting
1When you want to set
When you want to set DNR + TBC, press DNR&TBC on the front panel during the tape is playing.
When
IMPORTANT
The audio and video function menus do not appear:
¥when the VCR menu is displayed
¥during special effects playback
Tape,
Play PerfecTape and DNR + TBC is displayed only during playback.
PerfecTape displays only when a tape, with its erasure tab intact, is loaded and the VCR is stopped.
TV AUDIO
VIDEO
2 ADJUST
DNR&TBC
36