Mitsubishi Electronics HS-HD2000U manual Using Basic Playback Controls, Unloading a Tape

Playback

Using Basic Playback Controls

Rewinding a Tape

While the tape is stopped, press REW on the remote control or turn the shuttle ring on the front panel to the left.

Fast Forwarding a Tape

While the tape is stopped, press FF on the remote control or turn the shuttle ring on the front panel to the right.

Speed Search with Picture

REW

While the tape is playing, press FF on the remote control or turn the shuttle ring on the front panel to the right for forward speed search with picture, or press REW on the remote control or turn the shuttle ring on the front panel to the left for reverse speed search. See page 56 for additional information on searching techniques.

Pausing a Tape SP/EP

While the tape is playing, press PAUSE on the remote control or on the front panel to freeze the picture on the screen.

Press PAUSE a second time to return to normal play.

If you leave the VCR in pause for more than 5 minutes, the VCR will automatically stop to prevent damage to the tape.

When pausing a tape recorded in D-VHS format, a black picture may appear before the still picture appears depending on the integrated HDTV or IEEE 1394- equipped HDTV receiver.

Unloading a Tape

1Press EJECT on the front panel or on the remote control. If the VCR POWER is off, the VCR will turn on, eject the tape, then turn off.

2 Remove the tape.

Using Repaired Tapes

We recommend that you take any broken or torn tapes to a professional for repair. If you repair a torn tape with improper materials, you could damage your VCR when you play the tape.

Head Cleaning

Your VCR automatically cleans the head and the drum of the VCR whenever you	EJECT
load a tape. If you see mosaic noise, still or black picture during D-VHS playback,
or ÒnoiseÓ or snow during analog playback, eject the tape, re-load the tape, then
wait 3 or 4 seconds. Repeat this process several times to improve the picture.

FF

PAUSE

JOG/CHANNEL

PAUSE

EJECT

15