Mitsubishi Electronics HS-HD2000U manual On LCD Programming

Page 48

Timer Recording

On LCD Programming

On LCD Programming is a programming method to set the timer recording on the remote control LCD and transfer it to the VCR. For example, setting the timer recording of the program on channel 2, on the 12th from 10:00 am to 11:00 am, in SP mode:

1Load a tape with its erasure prevention tab intact into the VCR.

2Press LCD PROGRAM on the remote control. The display for programming the timer recording will appear on the remote control LCD and CH will flash.

3Turn the ADJUST dial to choose the channel you would like to record. Turn the SHUTTLE ring to the right.

¥If you are using a cable box that the VCR cannot control, enter the channel number on which the cable box sends a signal to your VCR (usually channel 3 or 4).

¥If you are recording from a DSS¨, PRIMESTAR¨ or DISH Networkª satellite receiver, simply choose the channel you would like to record; for example, channel 245. S will display next to the channel number.

¥To record from an external source, press INPUT or turn the ADJUST dial to: Select L1 for a source connected to the rear panel.

Select L2 for a source connected to the front panel.

4DAY will flash. Turn the ADJUST dial to choose the day on which you want to record.

Your choices are:

¥a single day up to one month away.

¥every day from Monday through Friday; for example, to tape a soap opera. To program, turn the ADJUST dial until DAILY appears.

¥the same day every week; for example, to tape your favorite weekly sitcom. To program, turn the ADJUST dial until E- (for EACH) and the desired day of the week appears.

Turn the SHUTTLE ring to the right once you have made your choice.

5The hour numbers of the start time will flash. Turn the ADJUST dial to set the hour when recording is to start. Turn the SHUTTLE ring to the right.

6The minute numbers of the start time will flash. Turn the ADJUST dial to set the minutes when recording is to start. Turn the SHUTTLE ring to the right.

7Set the stop time the same way as the start time, using steps 5 and 6.

8Press SP/EP under the flip cover of the remote control to select the recording mode.

¥select SP if you want to record in SP mode.

¥select EP if you want to record in EP mode.

¥do not make a selection if you want to keep the recording in the mode that was previously used.

CHDAY

ON

CHDAY

ON

CHDAY

ON

CHDAY

am ON

CHDAY

am ON

VCR-A

OFF

VCR-A

OFF

VCR-A

OFF

VCR-A

OFF

TRANSFER SP

VCR-A pm OFF

9Press TRANSFER. The programmed contents will be transferred to the VCR, and Recap screen will appear. The program you have chosen to record will be highlighted.

Make sure that the programming contents shown on the screen is correct.

IMPORTANT

If you cannot select the other program line by turning ADJUST dial on the remote, press PAUSE first, and then turn the ADJUST dial.

ÂProgram to record￿

CH DAY ON OFF￿

10 TH15 9:00p10:30pSP￿

¤2 MO12 11:30a 1:30pSP￿

----- --:-- --:-- SP￿

----- --:-- --:-- SP￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿ Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

46

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Video Cassette Recorder Ownerõs Guide Special Features HS-HD2000U Refer Servicing to Qualified Service PersonnelShortcuts Cleaning AccessoriesPower Sources Read InstructionsPower Lines Replacement PartsSafety Check OverloadingHooking Up Your VCR Unpacking Your VCRChoosing a Hookup Antenna or Cable System without Cable Box Antenna or Cable System with Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Connections to Satellite Receiver OptionalConnections to Home Theater Receiver Connections to IR Emitter Playback Connection listTV with Audio/Video Inputs Displaying 1394 connection listOperating Your Remote Control Installing the BatteriesOperating the VCR with the Remote Control PlaybackLoading a Tape Playing a TapePlaying a Tape Recorded in D-VHS Format Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Using ALLSETª to Set Up Your VCR AutomaticallySetting Up Your VCR If you choose Cable or Indoor/outdoor antIf you choose Cable box only or Digital cable box only Cancel NBC Satellite Receiver Control OFFAdding and Deleting Channels ÅSet the clock ÇAdd/delete channelsSelecting a Channel Digital cable boxSelecting antenna, cable or digital cable channels directly Selecting satellite channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄMonth REC Recording Recording copy protected digital programsSP/EP Input Channel Using One-Touch Recording OTR If you program too much time into the OTR timerHow OTR affects other controls Using Standby One-Touch Recording OTR2 To cancel OTR2Channel on the cable box How OTR2 affects other controlsRecording Mode Recording FormatRecording Time Using S-VHS Set-Up Menu Selecting Recording FormatIf you use S-VHS tape for recording If you use VHS tape for recordingSelecting S-input Setting Using S-throughUsing Audio and Video Functions Descriptions of Audio FunctionsAudio monitor Listen to Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions Timer Recording VHS Timer RecordingTimer Recording When you program both the D-VHS and analog timer recordingCH DAY on OFF Conventional VCR Timer Recording Cancelling a Recording in Progress Changing while ProgrammingVCR Plus+ System Programming Using the On Screen Display VCR Plus+¨ System ProgrammingVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Auto Speed Programming Program CautionProgram Skip Using Menus Program Skip Using the Power ButtonChanging Timer Recording Settings TV Programs that End on the Day AfterCancelling a Timer Recording before the Recording Starts Using a Satellite ReceiverMemory Backup Editing Features Copying a Tape from D-VHS to D-VHSEditing Features Copying a Tape from D-VHS to AnalogUsing the HS-HD2000U to Record from Another VCR Copying a Tape from Analog to AnalogUsing the HS-HD2000U to Playback to Another VCR RecordingAdvanced Features Advanced Playback Controls for analog playback onlySpecial Effects Adjusting the Tracking Advanced FeaturesTime Counter Searching TechniquesQuick search CM skip Speed searchCounter zero stop Index searchAutomatic index marks Manual index marksSearch to blank Repeat playbackTo make the time gauge and the remaining time appear Displaying the Current Time Customize Choices MenuVideo mute Auto power save auto-off Setting up PerfecTape¨RF converter PerfecTape¨Using PerfecTape¨ automatically Using PerfecTape¨ manuallyRentalXpress Search with Picture Using the remote control to operate your TV Setting up your remote control to operate your TVOperating your TV with the HS-HD2000U remote control Advanced OptionsTo program the remote control operational setting When you wish to operate the other VCRChild Lock To program the HS-HD2000U and the remote to VCR-BRemote Control Location of ControlsLocation of Controls Remote Control -- Flip cover open Remote Control LCD Liquid Crystal DisplayTransfer indicator Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks Important Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex VHSPage Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call
Top Page Image Contents