Timer Recording
6Program to record menu appears. Turn the ADJUST dial to choose the channel you would like to record. Turn the SHUTTLE ring to the right.
¥Select External L1 if you connect an integrated HDTV or an IEEE 1394- equipped HDTV receiver to the rear panel.
¥Select External L2 if you connect an integrated HDTV or an IEEE 1394- equipped HDTV receiver to the front panel.
7Day will flash. Turn the ADJUST dial to choose the day on which you want to record; for example, Monday the 12th.
Your choices are:
¥a single day up to one month away.
¥every day from Monday through Friday; for example, to tape a soap opera. To program, turn the ADJUST dial until
¥the same day every week; for example, to tape your favorite weekly sitcom. To program, turn the ADJUST dial until Every and the desired day of the week appears.
Turn the SHUTTLE ring to the right once you have made your choice.
8The hour numbers of the start time will flash. Turn the ADJUST dial to set the hour when recording is to start. Turn the SHUTTLE ring to the right.
9The minute numbers of the start time will flash. Turn the ADJUST dial to set the minutes when recording is to start. Turn the SHUTTLE ring to the right.
10Set the stop time the same way as the start time, using steps 8 and 9.
11Turn the ADJUST dial to set the recording speed:
SP = standard play; EP = extended play; AUTO = auto. Auto speed programming is discussed on page 48. Turn the SHUTTLE ring to the right.
IMPORTANT
If you turn the SHUTTLE ring to the right when you set the timer recording incompletely, Program is not completed will appear on your screen.
If two programmed recording times overlap, VCR is already programmed for that time will display on your screen for about 3 seconds, and then the Recap screen will appear. The program you have just set will flash for 3 seconds and the start time and the stop time will be shown in red letters. The start and stop time of the overlapped program will be highlighted in red color. You will need to erase one of them.
12The programmed memory will appear on the Recap screen.
13To program additional recording times, select an empty program line by turning ADJUST dial. Turn the SHUTTLE ring to the right. The VCR Plus+ system menu will appear. Continue the programming procedure from step 5.
14When you are finished with all programming, check the following:
¥Leave an integrated HDTV or an IEEE
¥Turn the VCR power OFF and make sure the programmed recording light is lit.
IMPORTANT
While the VCR is recording a digital broadcast, please do not change the channel on an integrated HDTV or an IEEE
The menu or the program list of an integrated HDTV or an IEEE 1394- equipped HDTV will be recorded if it is displayed during recording.
If you record a digital broadcast in analog format, the picture quality will not be as clear as that of the original digital broadcast.
If you record a copy protected digital program, the copy protect data will also be recorded.
|
|
|
|
|
|
|
|
|
|
| ÂProgram to record |
|
|
| |||||
| ÄChannel |
| External L1 |
|
|
| |||
| ÄDay |
|
|
|
|
| |||
| ÄStart time |
|
| ||||||
| ÄStop | time |
|
| |||||
| ÄRecord speed | AUTO |
|
| |||||
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||||||
| Use ADJUST to select, |
|
|
| |||||
| and ENTER. |
|
|
|
| ||||
| Press MENU to go back. |
|
|
| |||||
|
|
|
|
| |||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| |
| ÂProgram to record | ||||||||
| ÄChannel | External L1 |
|
| |||||
| ÄDay |
|
|
| Monday 12 |
| |||
| ÄStart time |
| |||||||
| ÄStop | time |
| ||||||
| ÄRecord speed | AUTO |
| ||||||
|
|
|
|
|
|
|
| ||
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||||||
| Use ADJUST to select, |
|
| ||||||
| and ENTER. |
|
|
|
| ||||
| Press MENU to go back. |
|
| ||||||
|
|
|
|
|
|
|
|
|
|
ÂProgram to record |
| ||
ÄChannel External L1 |
| ||
ÄDay | Monday 12 | ||
ÄStart time |
| 11:00am | |
ÄStop time |
| ||
ÄRecord speed | AUTO | ||
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use ADJUST to select, and ENTER.
Press MENU to go back.
|
|
|
|
|
|
| ÂProgram to record |
|
| ||
| ÄChannel External L1 |
| |||
| ÄDay | Monday 12 |
| ||
| ÄStart time |
| 11:30am | ||
| ÄStop time |
| 1:30pm | ||
| ÄRecord speed | SP | |||
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||
| Use ADJUST to select, |
|
| ||
| and ENTER. |
|
|
|
|
| Press MENU to go back. |
|
| ||
|
|
|
|
|
|
Recap screen
ÂProgram to record
CH DAY ON OFF
10 TH15 9:00p10:30pSP
¤L1 MO12 11:30a 1:30pSP
---
---
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use ADJUST to select, and ENTER.
Press MENU to go back.
39