Mitsubishi Electronics HS-HD2000U Setting the Clock Manually, If the VCR displays the wrong time

Page 26

Setting Up Your VCR

If the VCR displays the wrong time

1Follow the procedure on the previous page to step 3. Then turn the SHUTTLE ring to the right.

2You will see the Set the clock menu. Channel will be highlighted. If you know the channel that carries a time signal, turn the ADJUST dial to enter the channel. Most PBS stations broadcast a time signal. For the quickest response, enter your local PBS station. If you donÕt know it, leave the channel setting at AUTO. Turn the SHUTTLE ring to the right.

3Time zone will be highlighted. Turn the ADJUST dial to select the time zone of your area. Available time zones are: Atlantic, Eastern, Central, Mountain, Pacific, Alaska, and Hawaii. Turn the SHUTTLE ring to the right.

4Daylight savings will be highlighted. Turn the ADJUST dial to select AUTO, ON or OFF. If you follow daylight saving time, select ON. If not, select OFF. If you select AUTO, the VCR automatically sets the daylight saving time.

5To activate the auto clock function, turn off the VCR.

Setting the Clock Manually

Skip this section if your VCR has set the clock correctly using ALLSET or the auto clock function.

1Press MENU on the remote control. You will see the VCR Main Menu.

2Turn the ADJUST dial to select First Time Set-Up. Turn the SHUTTLE ring to the right. First Time Set-Up menu will appear. Turn the ADJUST dial to select Set the clock. Turn the SHUTTLE ring to the right.

3You will see the Set the clock menu. Clock set will be highlighted. Turn the ADJUST dial to select MANUAL. Turn the SHUTTLE ring to the right.

4Daylight savings will be highlighted. Turn the ADJUST dial to select ON or OFF. If you are currently following daylight savings, select ON. Otherwise, select OFF. Turn the SHUTTLE ring to the right.

ÅSet the clock￿

ÄChannel (065)￿

ÄTime zone (AUTO)￿ ÄDaylight savings(AUTO)￿ To activate Auto Clock,￿ turn off the VCR.￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿￿ Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

ÅSet the clock￿

ÄChannel (065)￿ ÄTime zone (Eastern )￿ ÄDaylight savings(AUTO)￿ To activate Auto Clock,￿ turn off the VCR.￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿ Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

ÅSet the clock￿

ÄChannel (065)￿ ÄTime zone (Eastern )￿ ÄDaylight savings(AUTO)￿ To activate Auto Clock,￿ turn off the VCR.￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿ Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

 

 

 

 

 

 

 

 

ÅSet the clock￿

 

 

 

 

￿

 

 

 

 

 

 

￿

(MANUAL)

 

￿

 

ÄClock set

 

 

￿

 

 

 

 

 

 

￿

 

 

 

 

 

 

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿

 

 

Use ADJUST to select,￿

 

 

 

 

and ENTER.￿

 

 

 

 

 

 

Press MENU to go back.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ÅSet the clock￿

￿

 

 

ÄDaylight savings

(OFF)

 

 

ÄMonth

--￿

 

 

 

 

 

ÄYear

--￿

 

 

ÄDate

--￿

 

 

ÄTime

--:--￿

 

 

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿

 

 

Use ADJUST to select,￿

 

 

 

 

and ENTER.￿

 

 

 

 

 

 

Press MENU to go back.

 

 

 

 

 

 

 

 

 

 

24

Image 26
Contents Video Cassette Recorder Ownerõs Guide Special Features HS-HD2000U Refer Servicing to Qualified Service PersonnelShortcuts Power Sources CleaningAccessories Read InstructionsSafety Check Power LinesReplacement Parts OverloadingChoosing a Hookup Hooking Up Your VCRUnpacking Your VCR Hooking Up Your VCR Antenna or Cable System without Cable BoxAntenna or Cable System with Cable Box Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Connections to Satellite Receiver OptionalConnections to Home Theater Receiver Connections to IR Emitter TV with Audio/Video Inputs PlaybackConnection list Displaying 1394 connection listOperating the VCR with the Remote Control Operating Your Remote ControlInstalling the Batteries PlaybackPlaying a Tape Recorded in D-VHS Format Loading a TapePlaying a Tape Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Using ALLSETª to Set Up Your VCR AutomaticallyIf you choose Cable box only or Digital cable box only Setting Up Your VCRIf you choose Cable or Indoor/outdoor ant Cancel NBC Satellite Receiver Control OFFAdding and Deleting Channels ÅSet the clock ÇAdd/delete channelsSelecting antenna, cable or digital cable channels directly Selecting a ChannelDigital cable box Selecting satellite channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄMonth REC Recording Recording copy protected digital programsSP/EP Input Channel How OTR affects other controls Using One-Touch Recording OTRIf you program too much time into the OTR timer Channel on the cable box Using Standby One-Touch Recording OTR2To cancel OTR2 How OTR2 affects other controlsRecording Time Recording ModeRecording Format If you use S-VHS tape for recording Using S-VHS Set-Up MenuSelecting Recording Format If you use VHS tape for recordingSelecting S-input Setting Using S-throughAudio monitor Listen to Using Audio and Video FunctionsDescriptions of Audio Functions Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions Timer Recording VHS Timer RecordingTimer Recording When you program both the D-VHS and analog timer recordingCH DAY on OFF Conventional VCR Timer Recording Cancelling a Recording in Progress Changing while ProgrammingVCR Plus+ System Programming Using the On Screen Display VCR Plus+¨ System ProgrammingVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Auto Speed Programming Program CautionChanging Timer Recording Settings Program Skip Using MenusProgram Skip Using the Power Button TV Programs that End on the Day AfterMemory Backup Cancelling a Timer Recording before the Recording StartsUsing a Satellite Receiver Editing Features Copying a Tape from D-VHS to D-VHSEditing Features Copying a Tape from D-VHS to AnalogUsing the HS-HD2000U to Record from Another VCR Copying a Tape from Analog to AnalogUsing the HS-HD2000U to Playback to Another VCR RecordingSpecial Effects Advanced FeaturesAdvanced Playback Controls for analog playback only Time Counter Adjusting the TrackingAdvanced Features Searching TechniquesQuick search CM skip Speed searchAutomatic index marks Counter zero stopIndex search Manual index marksTo make the time gauge and the remaining time appear Search to blankRepeat playback Video mute Displaying the Current TimeCustomize Choices Menu RF converter Auto power save auto-offSetting up PerfecTape¨ PerfecTape¨RentalXpress Using PerfecTape¨ automaticallyUsing PerfecTape¨ manually Search with Picture Operating your TV with the HS-HD2000U remote control Using the remote control to operate your TVSetting up your remote control to operate your TV Advanced OptionsChild Lock To program the remote control operational settingWhen you wish to operate the other VCR To program the HS-HD2000U and the remote to VCR-BRemote Control Location of ControlsTransfer indicator Location of Controls Remote Control -- Flip cover openRemote Control LCD Liquid Crystal Display Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks Important Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex VHSPage Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call