Mitsubishi Electronics HS-HD2000U manual RentalXpress, Using PerfecTape¨ automatically

Page 64

Advanced Features

using PerfecTape¨ automatically

1Load a blank tape into the VCR.

The VCR will display the testing status screen. When testing, the VCR records for one second, then evaluates the recording it made. The entire test takes about 8 seconds. During this time, the PT light on the front panel will flash. If you wish to cancel the test, press STOP on the remote while the PT light is still flashing.

When the test is done, the VCR will display the rating of your tape for 8 seconds. On the front panel, the PT light will shine steadily, indicating that the VCR has set its internal circuitry to make the best possible recording on this tape.

If you would like to know whether your VHS tape is suitable for S-ET recording, set the S-ET record in the S-VHS Set Up menu to AUTO then test the VHS tape. If the tape is suitable, S-ET record: ON is shown on the screen and the tape will record in S-ET mode. If it is not suitable for S-ET recording, S-ET record: OFF is shown on the screen and the tape will record in VHS format.

using PerfecTape¨ manually

1Load a tape that has its erasure prevention tab intact into the VCR.

2Find a portion of the tape that is OK to record over; this feature will record over one second of your tape.

3Press VIDEO on the remote control. Video function menu appears. Press VIDEO until the PerfecTape function appears.

4Turn the SHUTTLE ring to the right on the remote to begin the test. During this time, the PT light on the front panel will flash. To cancel the test, press STOP on the remote while the PT light is still flashing.

When the test is finished, the VCR will display the rating of your tape for 8 seconds. Turn off the display by pressing STOP on the remote control.

If you would like to know whether your VHS tape is suitable for S-ET recording, set the S-ET record in the S-VHS Set Up menu to AUTO then test the VHS tape. If the tape is suitable, S-ET record: ON is shown on the screen and the tape will record in S-ET mode. If it is not suitable for S-ET recording, S-ET record: OFF is shown on the screen and the tape will record in VHS format.

If you wish to erase the settings, eject the tape. The settings will also be erased if you press TIMER RESET or if the VCR loses power. After the test is finished, the PerfecTape function will not appear unless the tape is ejected.

RentalXpress

RentalXpress is a feature, when activated, that will automatically rewind the tape to the beginning, eject and power off the VCR, after it has reached the blank section of 30 seconds or longer on any rental tape (or any tape with the erasure prevention tab removed). To activate this feature:

3Complete steps 1 and 2 on page 60. Customize choices menu appears. Use the ADJUST dial to select Go to next page. Turn the SHUTTLE ring to the right.

4Turn the ADJUST dial to select RentalXpress. Turn the SHUTTLE ring to the right to select ON or OFF.

5Press MENU twice to exit the menus.

IMPORTANT

While the VCR is rewinding to the beginning of the tape, you cannot use repeat playback, counter zero stop and index search.

 

 

 

 

 

 

 

PerfecTape:SP￿

 

 

 

Band

S-ET record: ON￿

 

 

 

￿

 

 

 

 

High

Û¡¡¡¡¡¡¡¡¡àààààààÝ

￿

 

￿

 

 

 

 

Mid

Û¡¡¡¡¡¡¡¡¡¡¡àààààÝ

￿

 

￿

 

 

 

 

Low

Û¡¡¡¡¡¡¡¡¡¡¡àààààÝ

￿

 

￿

 

 

 

 

Test is completed. ￿

 

 

 

 

 

 

 

￿

￿

￿

￿

￿

VCR￿

PerfecTape￿

Use ENTER to start

ÃCustomize choices￿

￿

ÄVideo mute

(ON )

ÄAuto power save

(OFF)￿

ÄRF converter

(OFF)￿

ÄPerfecTape

(AUTO)￿

Go to next page ¤

￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿

Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

ÃCustomize choices￿

ÄRentalXpress (ON )￿ ÄSearch w/ Picture(OFF)￿ Back to previous page ¤￿

￿

￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿ Use ADJUST to select,￿ and ENTER to change.￿ Press MENU to go back.

62

Image 64
Contents Video Cassette Recorder Ownerõs Guide Special Features HS-HD2000U Refer Servicing to Qualified Service PersonnelShortcuts Cleaning AccessoriesPower Sources Read InstructionsPower Lines Replacement PartsSafety Check OverloadingUnpacking Your VCR Hooking Up Your VCRChoosing a Hookup Antenna or Cable System with Cable Box Antenna or Cable System without Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Connections to Satellite Receiver OptionalConnections to Home Theater Receiver Connections to IR Emitter Playback Connection listTV with Audio/Video Inputs Displaying 1394 connection listOperating Your Remote Control Installing the BatteriesOperating the VCR with the Remote Control PlaybackLoading a Tape Playing a TapePlaying a Tape Recorded in D-VHS Format Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Using ALLSETª to Set Up Your VCR AutomaticallyIf you choose Cable or Indoor/outdoor ant Setting Up Your VCRIf you choose Cable box only or Digital cable box only Cancel NBC Satellite Receiver Control OFFAdding and Deleting Channels ÅSet the clock ÇAdd/delete channelsSelecting a Channel Digital cable boxSelecting antenna, cable or digital cable channels directly Selecting satellite channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄMonth REC Recording Recording copy protected digital programsSP/EP Input Channel If you program too much time into the OTR timer Using One-Touch Recording OTRHow OTR affects other controls Using Standby One-Touch Recording OTR2 To cancel OTR2Channel on the cable box How OTR2 affects other controlsRecording Format Recording ModeRecording Time Using S-VHS Set-Up Menu Selecting Recording FormatIf you use S-VHS tape for recording If you use VHS tape for recordingSelecting S-input Setting Using S-throughUsing Audio and Video Functions Descriptions of Audio FunctionsAudio monitor Listen to Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions Timer Recording VHS Timer RecordingTimer Recording When you program both the D-VHS and analog timer recordingCH DAY on OFF Conventional VCR Timer Recording Cancelling a Recording in Progress Changing while ProgrammingVCR Plus+ System Programming Using the On Screen Display VCR Plus+¨ System ProgrammingVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Auto Speed Programming Program CautionProgram Skip Using Menus Program Skip Using the Power ButtonChanging Timer Recording Settings TV Programs that End on the Day AfterUsing a Satellite Receiver Cancelling a Timer Recording before the Recording StartsMemory Backup Editing Features Copying a Tape from D-VHS to D-VHSEditing Features Copying a Tape from D-VHS to AnalogUsing the HS-HD2000U to Record from Another VCR Copying a Tape from Analog to AnalogUsing the HS-HD2000U to Playback to Another VCR RecordingAdvanced Playback Controls for analog playback only Advanced FeaturesSpecial Effects Adjusting the Tracking Advanced FeaturesTime Counter Searching TechniquesQuick search CM skip Speed searchCounter zero stop Index searchAutomatic index marks Manual index marksRepeat playback Search to blankTo make the time gauge and the remaining time appear Customize Choices Menu Displaying the Current TimeVideo mute Auto power save auto-off Setting up PerfecTape¨RF converter PerfecTape¨Using PerfecTape¨ manually Using PerfecTape¨ automaticallyRentalXpress Search with Picture Using the remote control to operate your TV Setting up your remote control to operate your TVOperating your TV with the HS-HD2000U remote control Advanced OptionsTo program the remote control operational setting When you wish to operate the other VCRChild Lock To program the HS-HD2000U and the remote to VCR-BRemote Control Location of ControlsLocation of Controls Remote Control -- Flip cover open Remote Control LCD Liquid Crystal DisplayTransfer indicator Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks Important Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex VHSPage Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call