Mitsubishi Electronics HS-HD2000U manual Timer Recording

Page 40

Timer Recording

When you program both the D-VHS and analog timer recording

When you turn the VCR off, the programmed recording light will appear on the front panel display, showing that the VCR is in stand-by mode for the analog timer recording. In this mode, the D-VHS timer recording you have set may not be recorded depending on the integrated HDTV or IEEE 1394-equipped HDTV receiver that you are using. (Refer to your TV or receiver ownerÕs guide for the details.) If so, you need to press POWER on the VCR front panel once to cancel the stand-by mode when the D-VHS timer recording is activated. When you press POWER, the programmed recording light will be turned off but the VCR power will remain off. Please note that the VCR cannot activate the analog timer recording while the programmed recording light is turned off.

When the D-VHS timer recording is over, press POWER on the front panel twice to turn on the programmed recording light.

Analog (S-VHS/S-VHS ET/VHS) Timer Recording of Digital Broadcast

IMPORTANT

Be sure to connect the VCR and an integrated HDTV or an IEEE 1394- equipped HDTV receiver with an S-video/video and an audio cable to record a digital broadcast in analog format.

1Select the Front S-input in the S-VHSSet-UP menu when you connect an integrated HDTV or IEEE 1394-equipped HDTV receiver to the front panel of the VCR, or Rear S-input when you connect an integrated HDTV or IEEE 1394- equipped HDTV receiver to the rear of the VCR. See Selecting S-input Setting on page 33.

2Select the channel you would like to record on an integrated HDTV or an IEEE 1394-equipped HDTV receiver, not on the VCR.

3Load a tape with its erasure prevention tab intact into the VCR.

4Press MENU. VCR Main Menu appears on your screen. Turn the ADJUST dial to select Program to record. Turn the SHUTTLE ring to the right.

If there is at least one programmed recording already entered, you will see the Recap screen. Wait 4 seconds, and the VCR Plus+ system menu will appear.

IMPORTANT

If you have already programmed 8 recording events, Program memory is full will appear on your screen for 3 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.

5VCR Plus+ system menu appears. See page 42 to learn how to program with VCR Plus+ system. To pass this screen, turn the SHUTTLE ring to the right.

»VCR Main Menu￿

 

ÂProgram to record￿

Ä1394 connection list￿

ÃCustomize choices￿

ÈS-VHS Set-Up￿

 

ÄFirst Time Set-Up￿

￿ ￿

 

 

Use￿ ADJUST to select,￿

and ENTER.￿

 

Press MENU to exit menus

ÂProgram to record￿

CH DAY

ON

OFF￿

10 TH15

9:00a10:30pSP￿

¤--- --

--:-- --:-- SP￿

----- --:-- --:-- SP￿

----- --:-- --:-- SP￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿ Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

Recap screen

ÂVCR Plus+ system￿

￿

Use number keys to enter￿ the PlusCode number￿

--------￿

￿

or press ENTER to￿ program.￿

￿

Press MENU to go back.

38

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Video Cassette Recorder Ownerõs Guide Special Features HS-HD2000U Refer Servicing to Qualified Service PersonnelShortcuts Cleaning AccessoriesPower Sources Read InstructionsPower Lines Replacement PartsSafety Check OverloadingUnpacking Your VCR Hooking Up Your VCRChoosing a Hookup Antenna or Cable System with Cable Box Antenna or Cable System without Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Connections to Satellite Receiver OptionalConnections to Home Theater Receiver Connections to IR Emitter Playback Connection listTV with Audio/Video Inputs Displaying 1394 connection listOperating Your Remote Control Installing the BatteriesOperating the VCR with the Remote Control PlaybackLoading a Tape Playing a TapePlaying a Tape Recorded in D-VHS Format Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUsing Basic Playback Controls Unloading a TapeSetting Up Your VCR Using ALLSETª to Set Up Your VCR AutomaticallyIf you choose Cable or Indoor/outdoor ant Setting Up Your VCRIf you choose Cable box only or Digital cable box only Cancel NBC Satellite Receiver Control OFFAdding and Deleting Channels ÅSet the clock ÇAdd/delete channelsSelecting a Channel Digital cable boxSelecting antenna, cable or digital cable channels directly Selecting satellite channels sequentiallySetting the Clock Setting the Auto ClockSetting the Clock Manually If the VCR displays the wrong timeÄMonth REC Recording Recording copy protected digital programsSP/EP Input Channel If you program too much time into the OTR timer Using One-Touch Recording OTRHow OTR affects other controls Using Standby One-Touch Recording OTR2 To cancel OTR2Channel on the cable box How OTR2 affects other controlsRecording Format Recording ModeRecording Time Using S-VHS Set-Up Menu Selecting Recording FormatIf you use S-VHS tape for recording If you use VHS tape for recordingSelecting S-input Setting Using S-throughUsing Audio and Video Functions Descriptions of Audio FunctionsAudio monitor Listen to Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions Timer Recording VHS Timer RecordingTimer Recording When you program both the D-VHS and analog timer recordingCH DAY on OFF Conventional VCR Timer Recording Cancelling a Recording in Progress Changing while ProgrammingVCR Plus+ System Programming Using the On Screen Display VCR Plus+¨ System ProgrammingVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Auto Speed Programming Program CautionProgram Skip Using Menus Program Skip Using the Power ButtonChanging Timer Recording Settings TV Programs that End on the Day AfterUsing a Satellite Receiver Cancelling a Timer Recording before the Recording StartsMemory Backup Editing Features Copying a Tape from D-VHS to D-VHSEditing Features Copying a Tape from D-VHS to AnalogUsing the HS-HD2000U to Record from Another VCR Copying a Tape from Analog to AnalogUsing the HS-HD2000U to Playback to Another VCR RecordingAdvanced Playback Controls for analog playback only Advanced FeaturesSpecial Effects Adjusting the Tracking Advanced FeaturesTime Counter Searching TechniquesQuick search CM skip Speed searchCounter zero stop Index searchAutomatic index marks Manual index marksRepeat playback Search to blankTo make the time gauge and the remaining time appear Customize Choices Menu Displaying the Current TimeVideo mute Auto power save auto-off Setting up PerfecTape¨RF converter PerfecTape¨Using PerfecTape¨ manually Using PerfecTape¨ automaticallyRentalXpress Search with Picture Using the remote control to operate your TV Setting up your remote control to operate your TVOperating your TV with the HS-HD2000U remote control Advanced OptionsTo program the remote control operational setting When you wish to operate the other VCRChild Lock To program the HS-HD2000U and the remote to VCR-BRemote Control Location of ControlsLocation of Controls Remote Control -- Flip cover open Remote Control LCD Liquid Crystal DisplayTransfer indicator Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks Important Information ¥ Video game patterns and scoreboardsProblem Try This Trouble ChecksTrouble Checks Specifications IndexIndex VHSPage Warranty Mitsubishi Video Cassette Recorder Limited WarrantyFor your nearest Mitsubishi Authorized Service Center call
Top Page Image Contents