Timer Recording
TV Programs that End on the Day After
If you want to start the recording at 11:00 PM and end it at 2:00 AM the next day, simply set the start time to 11:00 PM on the recording start day and the end time to 2:00 AM. There is no need to change the day of the week.
Program Skip Using Menus
Sometimes you may want to skip one day of a timer recording but do not want to erase it. Program skip will prevent the recording, for that day only, of a program you have scheduled to record every day or every week.
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear. Turn the ADJUST dial to select Program to record. Turn the SHUTTLE ring to the right.
2Recap screen will display for 4 seconds. While this screen is displayed, turn the ADJUST dial to place the cursor arrow next to the program you wish to skip.
3Press STOP. The cursor arrow will change to a 
.
4Press MENU twice to turn off the menus.
To resume recording every day or every week, change the 
to the cursor arrow by following steps 1 to 4 again.
Program Skip Using the POWER Button
If you have entered only one program into your VCRÕs memory, you can skip the program without going into the VCRÕs menus. Simply press POWER on the front panel once. The programmed recording light will turn off, and the program will be skipped. If you decide not to skip the program, press POWER on the front panel twice; the programmed recording light will light up again.
Changing Timer Recording Settings
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear. Turn the ADJUST dial to select Program to record. Turn the SHUTTLE ring to the right.
2Recap screen will display for 4 seconds. While this screen is displayed, turn the ADJUST dial to place the cursor arrow next to the program you wish to change. Turn the SHUTTLE ring to the right. You will see the Program to record setting menu.
3Turn the SHUTTLE ring to the right repeatedly to select the item you wish to change. Turn the ADJUST dial to change it. Then Turn the SHUTTLE ring to the right repeatedly to return the altered program to the Recap screen.
4Press MENU twice to turn off the menus. Then press POWER to turn off the VCR. Make sure the programmed recording light is on.
ÂProgram to record
CH DAY ON OFF
2 MO12 11:30a 1:30pSP
10 TH15 9:00p10:00pEP
¤2
---
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use ADJUST to select, and ENTER.
Use STOP to skip on/off
ÂProgram | to record |
| |||
| CH | DAY | ON | OFF |
|
2 | MO12 | 11:30a | 1:30pSP | ||
10 | TH15 | 9:00p10:00pEP | |||
X | 2 | 8:00a | 8:30aSP | ||
---
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use ADJUST to select, and ENTER.
Use STOP to skip on/off
POWER
PROG REC
Recap screen
ÂProgram to record
CH DAY | ON | OFF |
¤2 MO12 11:30a 1:30pSP
---
---
---
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use ADJUST to select, and ENTER.
Press MENU to go back.
|
|
|
|
|
|
| ÂProgram to record |
|
| ||
| ÄChannel |
| 2 |
| |
| ÄDay | Monday 12 |
| ||
| ÄStart time |
| 11:30am | ||
| ÄStop time |
| 1:30pm | ||
|
|
|
| ||
| ÄRecord speed | EP | |||
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||
| Use ADJUST to select, |
|
| ||
| and ENTER. |
|
|
|
|
| Press MENU to go back. |
|
| ||
|
|
|
|
|
|
49