Mitsubishi Electronics HS-HD2000U Cancelling a Recording in Progress, Changing while Programming

Page 43

Timer Recording

9Turn the ADJUST dial to set the recording speed:

SP = standard play; EP = extended play; AUTO = auto. Auto speed programming is discussed on page 48. Turn the SHUTTLE ring to the right.

IMPORTANT

If you turn the SHUTTLE ring to the right when you set the timer recording incompletely, Program is not completed will appear on your screen.

If two programmed recording times overlap, VCR is already programmed for that time will display on your screen for about 3 seconds, and then the Recap screen will appear. The program you have just set will flash for 3 seconds and the start time and the stop time will be shown in red letters. The start and stop time of the overlapped program will be highlighted in red color. You will need to erase one of them.

10The programmed memory will appear on the Recap screen. ÒSÓ next to the channel number indicates satellite channels.

11To program additional recording times, select an empty program line by turning ADJUST dial. Turn the SHUTTLE ring to the right. The VCR Plus+ system menu will appear. Continue the programming procedure from step 3.

12When you are finished entering the programs you wish to record, check the following:

¥If you have a cable box, a digital cable box, a PRIMESTAR¨ or a DISH Networkª satellite receiver, leave the cable box or receiver turned ON.

¥If your VCR does not control your cable box, leave the box tuned to the station you wish to record.

¥Turn the VCR power OFF and make sure the programmed recording light is lit.

IMPORTANT

When programmed recordings of 4 and under are entered, only 4 of the 8 program lines appear on the Recap screen at any one time. To see additional program lines, turn the ADJUST dial to scroll the lines on the screen.

Cancelling a Recording in Progress

There are two ways to cancel a recording in progress:

Press STOP. The recording stops, but the program is not cancelled. There- fore, if you press REC, the recording will start again.

Press POWER on the front panel. The recording stops and the program is cancelled.

 

 

 

 

 

 

 

ÂProgram to record￿

 

 

 

ÄChannel

 

2￿

 

 

ÄDay

Monday 12￿

 

 

ÄStart time

 

11:30am￿

 

ÄStop time

 

1:30pm￿

 

 

 

 

 

ÄRecord speed

SP￿

 

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿

 

Use ADJUST to select,￿

 

 

 

and ENTER.￿

 

 

 

 

 

Press MENU to go back.

 

 

 

 

 

 

 

 

Recap screen

ÂProgram to record￿

CH DAY ON OFF￿

10 TH15 9:00p10:30pSP￿

¤2 MO12 11:30a 1:30pSP￿

----- --:-- --:-- SP￿

----- --:-- --:-- SP￿

¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹￿ Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

Programming not cancelled

STOP

STOP

Programming cancelled

POWER

Changing while Programming

To change one of your settings (such as start time) while you are programming:

Turn the SHUTTLE ring to the right to move forward through the program list. Turn the SHUTTLE ring to the left to move backward.

Then use ADJUST dial to change the setting.

You will cancel the entire program if you turn the shuttle ring to the left while the channel number is flashing.

backward forward

ADJUST

shuttle ring

41

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Video Cassette Recorder Ownerõs Guide Refer Servicing to Qualified Service Personnel Special Features HS-HD2000UShortcuts Read Instructions CleaningAccessories Power SourcesOverloading Power LinesReplacement Parts Safety CheckUnpacking Your VCR Hooking Up Your VCRChoosing a Hookup Antenna or Cable System with Cable Box Antenna or Cable System without Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Optional Connections to Satellite ReceiverConnections to Home Theater Receiver Connections to IR Emitter Displaying 1394 connection list PlaybackConnection list TV with Audio/Video InputsPlayback Operating Your Remote ControlInstalling the Batteries Operating the VCR with the Remote ControlPlaying a Tape Recorded in Analog S-VHS/S-VHS ET/VHS Format Loading a TapePlaying a Tape Playing a Tape Recorded in D-VHS FormatUnloading a Tape Using Basic Playback ControlsUsing ALLSETª to Set Up Your VCR Automatically Setting Up Your VCRIf you choose Cable or Indoor/outdoor ant Setting Up Your VCRIf you choose Cable box only or Digital cable box only Cancel NBC OFF Satellite Receiver ControlÅSet the clock ÇAdd/delete channels Adding and Deleting ChannelsSelecting satellite channels sequentially Selecting a ChannelDigital cable box Selecting antenna, cable or digital cable channels directlySetting the Auto Clock Setting the ClockIf the VCR displays the wrong time Setting the Clock ManuallyÄMonth REC Recording copy protected digital programs RecordingSP/EP Input Channel If you program too much time into the OTR timer Using One-Touch Recording OTRHow OTR affects other controls How OTR2 affects other controls Using Standby One-Touch Recording OTR2To cancel OTR2 Channel on the cable boxRecording Format Recording ModeRecording Time If you use VHS tape for recording Using S-VHS Set-Up MenuSelecting Recording Format If you use S-VHS tape for recordingUsing S-through Selecting S-input SettingNormal recording Record Using Audio and Video FunctionsDescriptions of Audio Functions Audio monitor Listen toDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions VHS Timer Recording Timer RecordingWhen you program both the D-VHS and analog timer recording Timer RecordingCH DAY on OFF Conventional VCR Timer Recording Changing while Programming Cancelling a Recording in ProgressVCR Plus+¨ System Programming VCR Plus+ System Programming Using the On Screen DisplayVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Program Caution Auto Speed ProgrammingTV Programs that End on the Day After Program Skip Using MenusProgram Skip Using the Power Button Changing Timer Recording SettingsUsing a Satellite Receiver Cancelling a Timer Recording before the Recording StartsMemory Backup Copying a Tape from D-VHS to D-VHS Editing FeaturesCopying a Tape from D-VHS to Analog Editing FeaturesCopying a Tape from Analog to Analog Using the HS-HD2000U to Record from Another VCRRecording Using the HS-HD2000U to Playback to Another VCRAdvanced Playback Controls for analog playback only Advanced FeaturesSpecial Effects Searching Techniques Adjusting the TrackingAdvanced Features Time CounterSpeed search Quick search CM skipManual index marks Counter zero stopIndex search Automatic index marksRepeat playback Search to blankTo make the time gauge and the remaining time appear Customize Choices Menu Displaying the Current TimeVideo mute PerfecTape¨ Auto power save auto-offSetting up PerfecTape¨ RF converterUsing PerfecTape¨ manually Using PerfecTape¨ automaticallyRentalXpress Search with Picture Advanced Options Using the remote control to operate your TVSetting up your remote control to operate your TV Operating your TV with the HS-HD2000U remote controlTo program the HS-HD2000U and the remote to VCR-B To program the remote control operational settingWhen you wish to operate the other VCR Child LockLocation of Controls Remote ControlRemote control operational setting Location of Controls Remote Control -- Flip cover openRemote Control LCD Liquid Crystal Display Transfer indicatorLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks ¥ Video game patterns and scoreboards Important InformationTrouble Checks Problem Try ThisTrouble Checks Index SpecificationsVHS IndexPage Mitsubishi Video Cassette Recorder Limited Warranty WarrantyFor your nearest Mitsubishi Authorized Service Center call
Top Page Image Contents