Mitsubishi Electronics HS-HD2000U manual Editing Features, Copying a Tape from D-VHS to D-VHS

Page 53

Editing Features

Copying a Tape from D-VHS to D-VHS

When you connect a D-VHS VCR equipped with IEEE 1394 INTERFACE terminal to the HS-HD2000U with an IEEE 1394 cable, you can copy a tape from D-VHS format to D-VHS. You cannot edit the tape while copying from D-VHS to D-VHS.

1Connect an IEEE 1394 cable to IEEE 1394 INTERFACE on the playback VCR and to IEEE 1394 INTERFACE on the HS-HD2000U. You can use either of the two IEEE 1394 INTERFACE terminals.

IMPORTANT

Do not pull out an IEEE 1394 cable during copying the tape.

You cannot copy a tape in D-VHS format from digital video equipment (for example, digital video camera) even if it is connected with an IEEE 1394 cable.

2Set the recording VCR to be able to control the playback VCR.

To do this, when you use HS-HD2000U as a recording VCR, press IEEE 1394 INPUT on the remote control to display d1 to d5 on the front panel which will correspond to the D-VHS VCR used as a playback VCR. If you use this VCR as a playback VCR and the other VCR as a recording VCR, refer to the recording VCR ownerÕs guide for this procedure.

3Put a D-VHS tape with the erasure prevention tab intact to the recording VCR.

4When you are using the HS-HD2000U as a recording VCR, make sure that the D-VHS button on the front panel is lit. If it is not, press the button to light it up.

5Put the tape you want to copy into the playback VCR and find the cue point. Press STOP if the picture starts playing.

IMPORTANT

As it will take a few seconds to automatically select the recording mode, stop the tape slightly before the point you want to start copying.

6On the playback VCR, press PLAY, then PAUSE.

7On the recording VCR, press REC, then PAUSE.

8Press the PAUSE buttons on both VCRs at the same time to begin copying the tape.

9When finished, press STOP on both VCRs.

IMPORTANT

The programs prohibited from copying or the programs with copy restriction cannot be copied correctly. When you use the HS-HD2000U as a recording VCR and copy such programs, Error CP appears on the front panel display.

HS-HD2000U	ANOTHER D-VHS VCR
	IEEE 1394
	INTERFACE
IEEE 1394	IEEE 1394
INTERFACE	INTERFACE

51

Image 53

Contents Video Cassette Recorder Ownerõs Guide Refer Servicing to Qualified Service Personnel Special Features HS-HD2000UShortcuts Accessories CleaningPower Sources Read InstructionsReplacement Parts Power LinesSafety Check OverloadingChoosing a Hookup Hooking Up Your VCRUnpacking Your VCR Hooking Up Your VCR Antenna or Cable System without Cable BoxAntenna or Cable System with Cable Box Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Optional Connections to Satellite ReceiverConnections to Home Theater Receiver Connections to IR Emitter Connection list PlaybackTV with Audio/Video Inputs Displaying 1394 connection listInstalling the Batteries Operating Your Remote ControlOperating the VCR with the Remote Control PlaybackPlaying a Tape Loading a TapePlaying a Tape Recorded in D-VHS Format Playing a Tape Recorded in Analog S-VHS/S-VHS ET/VHS FormatUnloading a Tape Using Basic Playback ControlsUsing ALLSETª to Set Up Your VCR Automatically Setting Up Your VCRIf you choose Cable box only or Digital cable box only Setting Up Your VCRIf you choose Cable or Indoor/outdoor ant Cancel NBC OFF Satellite Receiver ControlÅSet the clock ÇAdd/delete channels Adding and Deleting ChannelsDigital cable box Selecting a ChannelSelecting antenna, cable or digital cable channels directly Selecting satellite channels sequentiallySetting the Auto Clock Setting the ClockIf the VCR displays the wrong time Setting the Clock ManuallyÄMonth REC Recording copy protected digital programs RecordingSP/EP Input Channel How OTR affects other controls Using One-Touch Recording OTRIf you program too much time into the OTR timer To cancel OTR2 Using Standby One-Touch Recording OTR2Channel on the cable box How OTR2 affects other controlsRecording Time Recording ModeRecording Format Selecting Recording Format Using S-VHS Set-Up MenuIf you use S-VHS tape for recording If you use VHS tape for recordingUsing S-through Selecting S-input SettingDescriptions of Audio Functions Using Audio and Video FunctionsAudio monitor Listen to Normal recording RecordDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions VHS Timer Recording Timer RecordingWhen you program both the D-VHS and analog timer recording Timer RecordingCH DAY on OFF Conventional VCR Timer Recording Changing while Programming Cancelling a Recording in ProgressVCR Plus+¨ System Programming VCR Plus+ System Programming Using the On Screen DisplayVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Program Caution Auto Speed ProgrammingProgram Skip Using the Power Button Program Skip Using MenusChanging Timer Recording Settings TV Programs that End on the Day AfterMemory Backup Cancelling a Timer Recording before the Recording StartsUsing a Satellite Receiver Copying a Tape from D-VHS to D-VHS Editing FeaturesCopying a Tape from D-VHS to Analog Editing FeaturesCopying a Tape from Analog to Analog Using the HS-HD2000U to Record from Another VCRRecording Using the HS-HD2000U to Playback to Another VCRSpecial Effects Advanced FeaturesAdvanced Playback Controls for analog playback only Advanced Features Adjusting the TrackingTime Counter Searching TechniquesSpeed search Quick search CM skipIndex search Counter zero stopAutomatic index marks Manual index marksTo make the time gauge and the remaining time appear Search to blankRepeat playback Video mute Displaying the Current TimeCustomize Choices Menu Setting up PerfecTape¨ Auto power save auto-offRF converter PerfecTape¨RentalXpress Using PerfecTape¨ automaticallyUsing PerfecTape¨ manually Search with Picture Setting up your remote control to operate your TV Using the remote control to operate your TVOperating your TV with the HS-HD2000U remote control Advanced OptionsWhen you wish to operate the other VCR To program the remote control operational settingChild Lock To program the HS-HD2000U and the remote to VCR-BLocation of Controls Remote ControlRemote Control LCD Liquid Crystal Display Location of Controls Remote Control -- Flip cover openTransfer indicator Remote control operational settingLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks ¥ Video game patterns and scoreboards Important InformationTrouble Checks Problem Try ThisTrouble Checks Index SpecificationsVHS IndexPage Mitsubishi Video Cassette Recorder Limited Warranty WarrantyFor your nearest Mitsubishi Authorized Service Center call