Mitsubishi Electronics HS-HD2000U manual Copying a Tape from Analog to Analog

Page 55

Editing Features

Copying a Tape from Analog to Analog

There are two basic ways to make a copy of a tape from analog to analog.

One way is to use the HS-HD2000U to record and another VCR for playback.

The other way is to use another VCR to record and use the HS-HD2000U for playback.

Regardless of which method you may choose, you will need one RCA audio cable and one S-video cable to connect the two VCRs. You can use either a standard RCA video cable or an S-video cable. If you do not have these cables, they are available at your local electronics dealer. The highest quality is achieved through an S-video cable.

Using the HS-HD2000U to Record from Another VCR

1Connect the audio cable to AUDIO OUT L and R on the playback VCR and to AUDIO IN L and R on the HS-HD2000U. If the playback VCR is mono, use only the AUDIO IN L on the HS-HD2000U.

2If the playback VCR is S-VHS, connect an S-video cable to S-VIDEO OUT on the playback VCR and to the S-VIDEO IN on the HS-HD2000U.

If the playback VCR is standard VHS, connect a video cable to VIDEO OUT on the playback VCR and to the VIDEO IN on the HS-HD2000U.

3If the playback VCR is Hi-Fi, set the audio monitor to Stereo.

4Use INPUT to set the HS-HD2000U to External 1 (L1) if you used the HS-HD2000U rear panel jacks, or External 2 (L2) if you used the HS-HD2000U front panel jacks.

5Put a blank tape into the HS-HD2000U. If you are recording in S-VHS, be sure to use an S-VHS tape.

Make sure that the S-VHS record or S-ET record in the S-VHSSet-Up menu is set correctly. See page 32, Selecting Recording Format.

Make sure that the Front S-input or Rear S-input in the S-VHSSet-Up menu is set correctly. See page 33, Selecting S-input Setting.

6Put the tape you want to copy into the playback VCR and find the cue point. Press STOP if the picture starts playing.

7On the HS-HD2000U, press REC, then PAUSE.

8On the playback VCR, press PLAY, then PAUSE.

9Press the PAUSE buttons on both VCRs at the same time to begin copying the tape.

10When finished, press STOP on both VCRs.

HS-HD2000U RECORDING

PLAYBACK

S VIDEO IN 2

VIDEO IN 2 L/MONO-AUDIO IN 2 -R

S-VIDEO IN L R

VIDEO IN

AUDIO IN R

AUDIO OUT R

AUDIO IN L

AUDIO OUT L

R L

S-VIDEO OUT

VIDEO OUT

Use either a video cable or an S-video cable. Do not use both.

53

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Video Cassette Recorder Ownerõs Guide Refer Servicing to Qualified Service Personnel Special Features HS-HD2000UShortcuts Read Instructions CleaningAccessories Power SourcesOverloading Power LinesReplacement Parts Safety CheckUnpacking Your VCR Hooking Up Your VCRChoosing a Hookup Antenna or Cable System with Cable Box Antenna or Cable System without Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Optional Connections to Satellite ReceiverConnections to Home Theater Receiver Connections to IR Emitter Displaying 1394 connection list PlaybackConnection list TV with Audio/Video InputsPlayback Operating Your Remote ControlInstalling the Batteries Operating the VCR with the Remote ControlPlaying a Tape Recorded in Analog S-VHS/S-VHS ET/VHS Format Loading a TapePlaying a Tape Playing a Tape Recorded in D-VHS FormatUnloading a Tape Using Basic Playback ControlsUsing ALLSETª to Set Up Your VCR Automatically Setting Up Your VCRIf you choose Cable or Indoor/outdoor ant Setting Up Your VCRIf you choose Cable box only or Digital cable box only Cancel NBC OFF Satellite Receiver ControlÅSet the clock ÇAdd/delete channels Adding and Deleting ChannelsSelecting satellite channels sequentially Selecting a ChannelDigital cable box Selecting antenna, cable or digital cable channels directlySetting the Auto Clock Setting the ClockIf the VCR displays the wrong time Setting the Clock ManuallyÄMonth REC Recording copy protected digital programs RecordingSP/EP Input Channel If you program too much time into the OTR timer Using One-Touch Recording OTRHow OTR affects other controls How OTR2 affects other controls Using Standby One-Touch Recording OTR2To cancel OTR2 Channel on the cable boxRecording Format Recording ModeRecording Time If you use VHS tape for recording Using S-VHS Set-Up MenuSelecting Recording Format If you use S-VHS tape for recordingUsing S-through Selecting S-input SettingNormal recording Record Using Audio and Video FunctionsDescriptions of Audio Functions Audio monitor Listen toDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions VHS Timer Recording Timer RecordingWhen you program both the D-VHS and analog timer recording Timer RecordingCH DAY on OFF Conventional VCR Timer Recording Changing while Programming Cancelling a Recording in ProgressVCR Plus+¨ System Programming VCR Plus+ System Programming Using the On Screen DisplayVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Program Caution Auto Speed ProgrammingTV Programs that End on the Day After Program Skip Using MenusProgram Skip Using the Power Button Changing Timer Recording SettingsUsing a Satellite Receiver Cancelling a Timer Recording before the Recording StartsMemory Backup Copying a Tape from D-VHS to D-VHS Editing FeaturesCopying a Tape from D-VHS to Analog Editing FeaturesCopying a Tape from Analog to Analog Using the HS-HD2000U to Record from Another VCRRecording Using the HS-HD2000U to Playback to Another VCRAdvanced Playback Controls for analog playback only Advanced FeaturesSpecial Effects Searching Techniques Adjusting the TrackingAdvanced Features Time CounterSpeed search Quick search CM skipManual index marks Counter zero stopIndex search Automatic index marksRepeat playback Search to blankTo make the time gauge and the remaining time appear Customize Choices Menu Displaying the Current TimeVideo mute PerfecTape¨ Auto power save auto-offSetting up PerfecTape¨ RF converterUsing PerfecTape¨ manually Using PerfecTape¨ automaticallyRentalXpress Search with Picture Advanced Options Using the remote control to operate your TVSetting up your remote control to operate your TV Operating your TV with the HS-HD2000U remote controlTo program the HS-HD2000U and the remote to VCR-B To program the remote control operational settingWhen you wish to operate the other VCR Child LockLocation of Controls Remote ControlRemote control operational setting Location of Controls Remote Control -- Flip cover openRemote Control LCD Liquid Crystal Display Transfer indicatorLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks ¥ Video game patterns and scoreboards Important InformationTrouble Checks Problem Try ThisTrouble Checks Index SpecificationsVHS IndexPage Mitsubishi Video Cassette Recorder Limited Warranty WarrantyFor your nearest Mitsubishi Authorized Service Center call
Top Page Image Contents