Timer Recording
Conventional VCR Timer Recording
1Load a tape with its erasure prevention tab intact into the VCR.
2Press MENU. VCR Main Menu appears on your screen. Turn the ADJUST dial to select Program to record. Turn the SHUTTLE ring to the right.
If there is at least one programmed recording already entered, you will see the Recap screen. Wait 4 seconds, and the VCR Plus+ system menu will appear.
IMPORTANT
If you have already programmed 8 recording events, Program memory is full will appear on your screen for 3 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.
3VCR Plus+ system menu appears. See page 42 to learn how to program with VCR Plus+ system. To pass this screen, turn the SHUTTLE ring to the right.
4Program to record menu appears. Turn the ADJUST dial to choose the channel you would like to record; for example, channel 2. Turn the SHUTTLE ring to the right.
¥If you are using a cable box that the VCR cannot control, enter the channel number on which the cable box sends a signal to your VCR (usually channel 3 or 4).
¥If you are recording from a DSS¨, PRIMESTAR¨ or DISH Networkª satellite receiver, simply choose the channel you would like to record; for example, channel 245. SAT will display next to the channel number.
¥To record from an external source, press INPUT or turn the ADJUST dial to: Select External L1 for a source connected to the rear panel.
Select External L2 for a source connected to the front panel.
5Day will flash. Turn the ADJUST dial to choose the day on which you want to record; for example, Monday the 12th.
Your choices are:
¥a single day up to one month away.
¥every day from Monday through Friday; for example, to tape a soap opera. To program, turn the ADJUST dial until
¥the same day every week; for example, to tape your favorite weekly sitcom. To program, turn the ADJUST dial until Every and the desired day of the week appears.
Turn the SHUTTLE ring to the right once you have made your choice.
6The hour numbers of the start time will flash. Turn the ADJUST dial to set the hour when recording is to start. Turn the SHUTTLE ring to the right.
7The minute numbers of the start time will flash. Turn the ADJUST dial to set the minutes when recording is to start. Turn the SHUTTLE ring to the right.
8Set the stop time the same way as the start time, using steps 6 and 7.
»VCR Main Menu |
| |
ÂProgram to record | ||
Ä1394 connection list | ||
ÃCustomize choices | ||
| ||
ÄFirst Time | ||
|
|
|
Use ADJUST to select, | ||
and ENTER. |
| |
Press MENU to exit menus | ||
ÂProgram to record | ||
CH DAY | ON | OFF |
10 TH15 | 9:00a10:30pSP | |
---
---
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use ADJUST to select, and ENTER.
Press MENU to go back.
Recap screen
|
|
|
|
|
|
| ÂVCR Plus+ system |
|
| ||
|
|
|
| ||
| Use number keys to enter | ||||
| the PlusCode number | ||||
| |||||
|
|
|
| ||
| or press ENTER to |
|
| ||
| program. |
|
|
| |
|
|
|
| ||
| Press MENU to go back. |
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
| ÂProgram to record | ||||
| ÄChannel |
| 2 |
|
|
| ÄDay |
|
| ||
| ÄStart time |
| |||
| ÄStop time |
| |||
| ÄRecord speed | AUTO |
| ||
|
|
|
| ||
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||
| Use ADJUST to select, |
| |||
| and ENTER. |
|
|
| |
| Press MENU to go back. |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ÂProgram to record |
|
| |||
| ÄChannel |
| 2 |
| ||
|
|
|
| |||
| ÄDay |
| Monday 12 |
| ||
| ÄStart time |
|
| |||
| ÄStop time |
|
| |||
| ÄRecord speed | AUTO |
| |||
|
|
|
|
|
| |
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | |||||
| Use ADJUST to select, |
|
| |||
| and ENTER. |
|
|
|
| |
| Press MENU to go back. |
|
| |||
|
|
|
|
|
|
|
ÂProgram to | record |
| |
ÄChannel |
| 2 | |
ÄDay | Monday 12 | ||
ÄStart time |
| 11:00am | |
ÄStop time |
| ||
ÄRecord speed | AUTO | ||
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | |||
Use ADJUST to select, and ENTER.
Press MENU to go back.
40