Mitsubishi Electronics HS-HD2000U Child Lock, To program the remote control operational setting

Page 67

Advanced Features

To program the remote control operational setting

The HS-HD2000U has two remote control operational settings, VCR-A and VCR-B. These are available so you may separately control two Mitsubishi VCRs that are placed close together. The VCR-A setting can be used to operate any other Mitsubishi VCR introduced since 1986. Setting the HS-HD2000U to VCR-B will allow the HS-HD2000U be operated without the VCR responding at the same time.

To program the HS-HD2000U and the remote to VCR-B

For VCR:

1Make sure the HS-HD2000U is plugged in but turned off. On the VCR front panel, turn the shuttle ring left while holding down SP/EP on the front panel. To confirm that the VCR responds to VCR-B signals, b appears on the front panel display.

For remote:

2On the remote, make sure the VCR/TV slide switch is in the VCR position, then press VCR-A/B on the remote control until VCR-B appears on the remote control LCD.

When you wish to operate the other VCR

SP/EP

1 On the remote, with the VCR/TV slide switch in the VCR position, press VCR- A/B on the remote control until VCR-A appears on the remote control LCD.

To reprogram the HS-HD2000U to respond to VCR-A signals again

1Make sure the HS-HD2000U is plugged in but turned off. On the VCR front panel, turn the shuttle ring right while holding down SP/EP on the front panel. To confirm that the VCR responds to VCR-A signals, A appears on the front panel display.

IMPORTANT

Some other models of Mitsubishi VCRs can respond to VCR-B signals. If your other VCR is one of these models, and you would like to program the other VCR to respond to VCR-B signals, refer to the ownerÕs guide that came with the other VCR.

Some of the buttons may not function or they may operate different features than expected for the other VCR, particularly, those Mitsubishi VCRÕs that are more than 10 years old because Mitsubishi changes the codes from time to time.

Child Lock

The child lock feature prevents others from using your VCR. To lock the VCR:

1Press and hold down DISPLAY on the remote control for about 8 seconds. The LOCK light on the front panel display will light up.

2To cancel the child lock, press and hold down DISPLAY for about 8 seconds, until the LOCK light on the front panel display goes out.

IMPORTANT

You can lock the VCR with the power off, even if the VCR is standing by for a programmed recording. If you lock the VCR with no cassette in it, the VCR will not accept a cassette.

VCR-A/B

shuttle ring

VCR-B VCR-A

LOCK light

PWR.

SP

 

 

 

 

VCR

REC

 

 

 

 

 

CH

 

LOCK

L

R

 

 

 

 

 

 

H

M

 

S

 

65

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Video Cassette Recorder Ownerõs Guide Refer Servicing to Qualified Service Personnel Special Features HS-HD2000UShortcuts Read Instructions CleaningAccessories Power SourcesOverloading Power LinesReplacement Parts Safety CheckUnpacking Your VCR Hooking Up Your VCRChoosing a Hookup Antenna or Cable System with Cable Box Antenna or Cable System without Cable BoxHooking Up Your VCR Connections to TV with Audio Video Inputs Ieee 1394-equipped Hdtv receiver Correct Optional Connections to Satellite ReceiverConnections to Home Theater Receiver Connections to IR Emitter Displaying 1394 connection list PlaybackConnection list TV with Audio/Video InputsPlayback Operating Your Remote ControlInstalling the Batteries Operating the VCR with the Remote ControlPlaying a Tape Recorded in Analog S-VHS/S-VHS ET/VHS Format Loading a TapePlaying a Tape Playing a Tape Recorded in D-VHS FormatUnloading a Tape Using Basic Playback ControlsUsing ALLSETª to Set Up Your VCR Automatically Setting Up Your VCRIf you choose Cable or Indoor/outdoor ant Setting Up Your VCRIf you choose Cable box only or Digital cable box only Cancel NBC OFF Satellite Receiver ControlÅSet the clock ÇAdd/delete channels Adding and Deleting ChannelsSelecting satellite channels sequentially Selecting a ChannelDigital cable box Selecting antenna, cable or digital cable channels directlySetting the Auto Clock Setting the ClockIf the VCR displays the wrong time Setting the Clock ManuallyÄMonth REC Recording copy protected digital programs RecordingSP/EP Input Channel If you program too much time into the OTR timer Using One-Touch Recording OTRHow OTR affects other controls How OTR2 affects other controls Using Standby One-Touch Recording OTR2To cancel OTR2 Channel on the cable boxRecording Format Recording ModeRecording Time If you use VHS tape for recording Using S-VHS Set-Up MenuSelecting Recording Format If you use S-VHS tape for recordingUsing S-through Selecting S-input SettingNormal recording Record Using Audio and Video FunctionsDescriptions of Audio Functions Audio monitor Listen toDescriptions of Video Functions Selecting and Adjusting the Audio and Video Functions VHS Timer Recording Timer RecordingWhen you program both the D-VHS and analog timer recording Timer RecordingCH DAY on OFF Conventional VCR Timer Recording Changing while Programming Cancelling a Recording in ProgressVCR Plus+¨ System Programming VCR Plus+ System Programming Using the On Screen DisplayVCR Plus+ System Programming Using the Remote Control LCD Timer Recording Quick Program Quick ProgramOn LCD Programming Timer Recording Hints Program Caution Auto Speed ProgrammingTV Programs that End on the Day After Program Skip Using MenusProgram Skip Using the Power Button Changing Timer Recording SettingsUsing a Satellite Receiver Cancelling a Timer Recording before the Recording StartsMemory Backup Copying a Tape from D-VHS to D-VHS Editing FeaturesCopying a Tape from D-VHS to Analog Editing FeaturesCopying a Tape from Analog to Analog Using the HS-HD2000U to Record from Another VCRRecording Using the HS-HD2000U to Playback to Another VCRAdvanced Playback Controls for analog playback only Advanced FeaturesSpecial Effects Searching Techniques Adjusting the TrackingAdvanced Features Time CounterSpeed search Quick search CM skipManual index marks Counter zero stopIndex search Automatic index marksRepeat playback Search to blankTo make the time gauge and the remaining time appear Customize Choices Menu Displaying the Current TimeVideo mute PerfecTape¨ Auto power save auto-offSetting up PerfecTape¨ RF converterUsing PerfecTape¨ manually Using PerfecTape¨ automaticallyRentalXpress Search with Picture Advanced Options Using the remote control to operate your TVSetting up your remote control to operate your TV Operating your TV with the HS-HD2000U remote controlTo program the HS-HD2000U and the remote to VCR-B To program the remote control operational settingWhen you wish to operate the other VCR Child LockLocation of Controls Remote ControlRemote control operational setting Location of Controls Remote Control -- Flip cover openRemote Control LCD Liquid Crystal Display Transfer indicatorLocation of Controls Front Panel Location of Controls Front Panel Display Location of Controls Rear Panel Jacks ¥ Video game patterns and scoreboards Important InformationTrouble Checks Problem Try ThisTrouble Checks Index SpecificationsVHS IndexPage Mitsubishi Video Cassette Recorder Limited Warranty WarrantyFor your nearest Mitsubishi Authorized Service Center call
Top Page Image Contents