
C a u
Remove
this page
and keep
it in a
secure
place.
®
C681M-A-LB (9/01)
3500 Pelco Way
Clovis, CA 93612 USA
North America and Canada
Tel
FAX
DataFAX
International
Tel +1
FAX +1
DataFAX +1
PelcoEurope BV
Tel +31
FAX +31
www.pelco.com
t i o n
The DX3000 Series DVR has an unmarked lock button to restrict unauthorized use of the re- corder. The lock button will work only as long as no one discovers its function. Since you may need to make the manual accessible to others, the lock button’s location and operation are NOT documented in the manual – this is the only place it is shown.
If you want to keep this page in the manual, just staple it inside the cover.
The lock button is located on the front panel below the PRE ALARM REC light.
SIMPLE LOCK
When the LOCK button is pressed (with a ball- point pen, for example), the front panel controls are disabled except for the CAMERA, SPLIT/ SEQUENCE, and ZOOM buttons. The LOCK indicator light illuminates when the unit is in the Lock mode. Press the LOCK button again to exit the Lock mode.
The simple lock function does not work if a pass- word has been entered into the recorder (refer to Password Lock).
PASSWORD LOCK
Pressing the LOCK button on the front of the unit lets you record a password. Once the pass- word has been entered and the unit has been locked, the front panel controls are disabled
except for the CAMERA, SPLIT/SEQUENCE, and ZOOM buttons.
Entering Initial Password
1.Press the LOCK button for five seconds. The Password Setting menu appears.
2.Enter a
3.Turn the SHUTTLE ring to the right to enter the password.
4.
If the wrong password is entered, “PASS- WORD ERROR” appears on the screen, and the password is cleared. Turn the SHUTTLE ring to the left to exit the menu. Press the LOCK button to turn off the indicator light. Return to step 1.
Changing Password
1.Turn the Password Lock feature OFF (refer to Turning Password Lock On and Off ).
2.Press the LOCK button for five seconds. The Password Lock menu appears.
3.Enter the current password, and then turn the SHUTTLE ring to the right. The Password Setting menu appears.
4.Using the same procedure for setting the original password, enter and set the new password.
Password Error
If you are asked to enter a password and you enter the wrong one, press the WARNING RE- SET button to clear the incorrect password.
Turning Password Lock On and Off
OFF: To disable the Password Lock feature, press the LOCK button, enter the password, and turn the SHUTTLE ring to the right.
ON: To return to locked status, press the LOCK button again.
Erasing the Password
If you no longer need a password, or if you for- get your password, the current password can be erased.
1.Press and hold the INFO and SET UP but- tons on the front of the recorder. Press the RESET button on the back of the unit, and then release the INFO and SET UP buttons. The unit begins a
2.When the
3.Turn on the power.
4.Reset the time and date.