CAMERA TITLE
Titles can be added for each camera. In
Skip steps 1 and 2 if they have already been done.
1.Press the SET UP button to display the Menu Setting menu.
2.Turn the JOG dial to move the cursor to MPX DISPLAY, and then turn the SHUTTLE ring to the right. The MPX Display menu appears.
3.Turn the JOG dial to move the cursor to CAMERA TITLE, and then turn the SHUTTLE ring to the right.
4.Turn the JOG dial to the right to move the cursor next to camera number, and then turn the SHUTTLE ring to the right. The first character position of the TITLE setting flashes.
NOTE: If the PRE
DX3016 Models Only – The Camera Tile menu has two screens. When the cursor is on camera 8, turn the JOG dial to the right to scroll to the next screen.
5.Turn the JOG dial to display the desired character, and then turn the SHUTTLE ring to the right to move to the next position.
Turning the SHUTTLE ring to the left erases the character.
6.Repeat step 5 to finish entering the word. To exit the TITLE row, move the flashing cursor to the right end, and then turn the SHUTTLE ring to the right.
7.Repeat steps
8.Turn the SHUTTLE ring to the left once (twice for DX3016 models) to return to the MPX Display menu or twice (three times for DX3016 models) to return to the Menu Setting menu, or press the SET UP button to exit the programming mode.
You cannot exit the menu if any TITLE character is flashing. Refer to step 6 to exit.
POWER FAILURE
There is nothing to program in this screen. It lists power failures. Refer to Power Failure in the Operation section.
RECORD
IMAGE QUALITY
Skip steps 1 and 2 if they have already been done.
1.Press the SET UP button to display the Menu Setting menu.
2.Turn the JOG dial to move the cursor to NORMAL REC SETTING, and then turn the SHUTTLE ring to the right. The Normal Rec Setting menu appears.
3.Check that the cursor is next to IMAGE QUALITY, and then turn the SHUTTLE ring to the right. The Image Quality option starts flashing.
NOTE: If the PRE
44 | Pelco Manual |