Pelco DX3009-060, DX3016-060, DX3016-120 PRE-ALARM Recording, All, Sep, OFF, SHORT, MEDIUM, Long

Page 26

4.Turn the JOG dial to select the option, and then turn the SHUTTLE ring to the right. The option stops flashing.

Turning the JOG dial switches the record alarm options as follows:

ALL, SEP

ALL: Alarm recording of all cameras set to be operated on the Define Alarm Group menu will start when the ALARM IN terminal is grounded.

SEP: Alarm recording of the camera that received the alarm signal will start. If several cameras received an alarm input at once, all of those cameras will start alarm record- ing.

5.Do one of the following:

•Turn the JOG dial to go to another item in this menu.

•Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an- other menu.

•Press the SET UP button to exit the programming mode.

PRE-ALARM RECORDING

This setting determines if pre-alarm images will be recorded either before motion is de- tected or before there is an alarm signal at the ALARM IN terminal. If the pre-alarm record- ing option is selected, the recorder temporarily records video, but saves it only if motion is detected or the ALARM IN terminal is activated. The duration of the saved recording de- pends on the settings in the MAX REC FIELDS, IMAGE QUALITY, and PRE-A REC fields.

Skip steps 1 and 2 if they have already been done.

1.Press the SET UP button to display the Menu Setting menu.

2.Turn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears.

3.Turn the JOG dial to move the cursor to PRE A-REC, and then turn the SHUTTLE ring to the right. The option starts flashing.

4.Turn the JOG dial to select the option. The option stops flashing.

Turning the JOG dial switches the pre-alarm recording options as follows:

OFF, SHORT, MEDIUM, LONG

NOTE: When SHORT, MEDIUM, or LONG is selected, the SELECT REC MODE field in the Normal Rec Setting menu is automatically set to A-REC (Alarm Record), and many menu settings cannot be changed.

NOTE: The duration of recording before the alarm occurs depends on the settings in the MAX REC FIELDS, IMAGE QUALITY, and PRE A-REC fields.

5.Turn the SHUTTLE ring to the right. The unit enters standby mode for pre-alarm re- cording, and the PRE ALARM REC indicator on the front panel illuminates (unless OFF was selected).

Pelco Manual C681M-D (2/02)

25

Image 26

Contents Password Error Entering Initial PasswordChanging Password Turning Password Lock On and OffUL Listed Contents Using the Copy Button Changing Playback Interval Fast FORWARD/REWIND SearchingList of Illustrations Important Safeguards and Warnings GB PER Unit OverviewDescription Models Power buttonTimer REC button Front Panel ControlsPRE Alarm REC indicator Recording indicators Timer REC indicatorDET indicator Multiplexer buttons Camera number buttonsSET UP button Mode indicators Access indicatorLock indicator Copy indicatorRear Panel Connectors Alarm in terminals AC power socketRS-232C connector Power on terminalInstallation Camera #1Schematics for Alarm Input and Output Terminals Schematics for Input and Output Terminals Iomega Z250S DVD-RAMHDD Adding or Removing a Copy or Archive Device Adding a Hard DrivesConfirming That a Device is Connected BOOT-UP DelayRemoving a Hard Drives SET UP ProgrammingMenu Tree, DX3009 Models Pelco Manual C681M-D 2/02 Menu Tree, DX3016 Models Menu Tree, DX3016 Models Pelco Manual C681M-D 2/02 BASIC, STANDARD, MEDIUM, HIGH, Superior Alarms Image QualityMaximum Recording Fields Define Group Setting Alarm Recording Duration Record AlarmOFF, SHORT, MEDIUM, Long PRE-ALARM RecordingALL, SEP Archive Data DET SettingArchive Pointer Reset Overwrite Audio Recording Auto EjectBuzzer KEY, WRNG, REMAIN, OFFCall OUT Capacity RemainingData Clear Erase Selection HDD, ARC, NoneFIFO/OVERWRITE Mode DX3016 Models Only Backup Following a Power FailureHard Disk Drive HDD Full IM-CHECK Mode Hard Disk Drive HDD Repeat PlaybackMode OUT Initialize MenusREC, PLAY, POWER, Remain Motion DetectionLOW, LOWER, HIGHER, HIGH, MED Multiplexer Display Four-Camera Split 4 Setting Screen Switch Pattern DX3016 Models OnlySplit 4 Screen Setting DX3016 Models Only Split 9 Screen Setting DX3016 Models OnlySplit 16 Screen Setting DX3016 Models Only Sequence Channel Title Displaying Camera Title and/or NumberAlarm Display NONE, TITLE, CH. noRecord Image Quality Power FailureCamera Title Maximum Recording Fields Select Recording Mode Define GroupRS-232C Communication Restoring Menu Data Saving Menu SettingsSaving Menu Data TCP/IP Setting DX3016 Models Only Time and Date Display Display ModeCharacter Size Title Time and Date SettingClock Location Timer Recording C, SKIP, ARC, Power Repeat steps 8-10 for the ending timeSetting for the prioritized Program #2 Motion Detection During a Timer Recording DX3016 Models Only Estimating Recording Time Operation SATDX3009 Models Viewing CamerasSPLIT/SEQUENCE Button DX3009 Models Nine camerasRecording Basic Recording Zoom ButtonsRemote Viewing Alarm Recording Timer Recording in the Programming section Playback Basic PlaybackFRAME-BY-FRAME Still Frame Playback Adjusting Playback SpeedRegular Playback Mode Pause PlaybackSearching Changing Playback IntervalFast FORWARD/REWIND Index Search Skip Search Alarm List Search Jump to Starting PointBacking UP Data Using the Archive ButtonPlayback on Another Device Auto-Eject at the Completion of Backup Using the Copy ButtonDX3016 Models Still-Frame Playback Copy ModeSimultaneous Recording and Backup Restoring Data from a Backup Device Power Failure List Information Elapsed Time DisplayScsi Devices Connected ResetRecorded Period Without Audio recording DX3009 Recording Time TablesAudio recording time table Audio recordingDX3009 Recording Time Tables Audio recording, Pre-Alarm Recording duration is set to Long DX3016 Recording Time Tables BasicWithout Audio recording, recording duration is set to Short Audio recording, recording duration is set to LongAudio recording, recording duration is set to Medium Audio recording, recording duration is set to ShortCall OUT Troubleshooting Description of problem Please consult the followingIs the Lock function or the Password Lock function PCM SpecificationsJpeg Alarm OUT Power onPower OFF Power ON, Power OFF, Alarm IN, Clock ADJ, RECWarranty and Return Information Regulatory Notices