Pelco DX3016-120, DX3016-060, DX3009-060 manual Is the Lock function or the Password Lock function

Page 82

	Description of problem	Please consult the following

	The unit will not respond to PC control.	Is the RS-232C setting set correctly?
		Are the unit and computer connected correctly?
		Is there a defect in the connecting cable?
		Is the proper connecting cable being used?
		Is the REMOTE communication indicator light on (DX3016 models only)? Press the REMOTE communica-
		tion button to turn off the light.

	The DEVICE CHECK menu does	Is peripheral device’s SCSI ID setting set correctly?
	appear when power is turned on.	Inspect the connecting cable.

	The unit is not detecting its peripheral	Is the SCSI terminator switch on?
	recording device(s).	Have the peripheral devices been disconnected?
		Are the recommended peripheral devices being used?

OTHERS	Black screens are being displayed	Operations settings have not been made, in the Camera Operation Setting parameter of the DEFINE
	during multi-screen display.	GROUP SETTING. Input from cameras displaying the “ - ” symbol will appear black on the monitor.

	Button operation is not working.	Is the playback device indicator light blinking? Wait until the light stays on, then start operation once more.
		If the light does not stop blinking for a long period, use the RESET button located at the back of the unit.
		Is the LOCK function or the PASSWORD LOCK function in
		effect? If so, please cancel the function(s).

	Button operation of camera numbers is	Is the Menu screen being displayed? (Camera number buttons cannot be used when the Menu screen is
	not working.	displayed.)
		Is the unit currently accessing a peripheral recording device?
		Check the ACCESS indicator.

	The unit will not detect motion.	Is the MOTION DETECTION setting ON in the Initial Set Up menu?
		Is the value of the MOTION THRESHOLD setting greater than the dot value entered in the SET DETEC-
		TION MASK setting?
		The motion detection function will not work when menus are open. (The M-DET indicator light is off when
		the motion detection function is not operating.)

Pelco Manual C681M-D (2/02)

81

Image 82

Contents Password Error Entering Initial PasswordChanging Password Turning Password Lock On and OffUL Listed Contents Using the Copy Button Changing Playback Interval Fast FORWARD/REWIND SearchingList of Illustrations Important Safeguards and Warnings Description OverviewGB PER Unit Models Power buttonTimer REC button Front Panel ControlsPRE Alarm REC indicator Recording indicators Timer REC indicatorDET indicator Multiplexer buttons Camera number buttonsSET UP button Mode indicators Access indicatorLock indicator Copy indicatorRear Panel Connectors Alarm in terminals AC power socketRS-232C connector Power on terminalInstallation Camera #1Schematics for Alarm Input and Output Terminals Schematics for Input and Output Terminals HDD DVD-RAMIomega Z250S Adding or Removing a Copy or Archive Device Adding a Hard DrivesRemoving a Hard Drives BOOT-UP DelayConfirming That a Device is Connected SET UP ProgrammingMenu Tree, DX3009 Models Pelco Manual C681M-D 2/02 Menu Tree, DX3016 Models Menu Tree, DX3016 Models Pelco Manual C681M-D 2/02 Maximum Recording Fields Alarms Image QualityBASIC, STANDARD, MEDIUM, HIGH, Superior Define Group Setting Alarm Recording Duration Record AlarmALL, SEP PRE-ALARM RecordingOFF, SHORT, MEDIUM, Long Archive Pointer Reset DET SettingArchive Data Overwrite Audio Recording Auto EjectBuzzer KEY, WRNG, REMAIN, OFFCall OUT Capacity RemainingData Clear Erase Selection HDD, ARC, NoneFIFO/OVERWRITE Mode DX3016 Models Only Backup Following a Power FailureHard Disk Drive HDD Full IM-CHECK Mode Hard Disk Drive HDD Repeat PlaybackMode OUT Initialize MenusREC, PLAY, POWER, Remain Motion DetectionLOW, LOWER, HIGHER, HIGH, MED Multiplexer Display Four-Camera Split 4 Setting Screen Switch Pattern DX3016 Models OnlySplit 4 Screen Setting DX3016 Models Only Split 9 Screen Setting DX3016 Models OnlySplit 16 Screen Setting DX3016 Models Only Sequence Channel Title Displaying Camera Title and/or NumberAlarm Display NONE, TITLE, CH. noCamera Title Power FailureRecord Image Quality Maximum Recording Fields Select Recording Mode Define GroupRS-232C Communication Saving Menu Data Saving Menu SettingsRestoring Menu Data TCP/IP Setting DX3016 Models Only Time and Date Display Display ModeCharacter Size Clock Location Time and Date SettingTitle Timer Recording C, SKIP, ARC, Power Repeat steps 8-10 for the ending timeSetting for the prioritized Program #2 Motion Detection During a Timer Recording DX3016 Models Only Estimating Recording Time Operation SATDX3009 Models Viewing CamerasSPLIT/SEQUENCE Button DX3009 Models Nine camerasRemote Viewing Zoom ButtonsRecording Basic Recording Alarm Recording Timer Recording in the Programming section Playback Basic PlaybackFRAME-BY-FRAME Still Frame Playback Adjusting Playback SpeedRegular Playback Mode Pause PlaybackFast FORWARD/REWIND Changing Playback IntervalSearching Index Search Skip Search Alarm List Search Jump to Starting PointPlayback on Another Device Using the Archive ButtonBacking UP Data Auto-Eject at the Completion of Backup Using the Copy ButtonSimultaneous Recording and Backup Still-Frame Playback Copy ModeDX3016 Models Restoring Data from a Backup Device Power Failure List Information Elapsed Time DisplayRecorded Period ResetScsi Devices Connected Without Audio recording DX3009 Recording Time TablesAudio recording time table Audio recordingDX3009 Recording Time Tables Audio recording, Pre-Alarm Recording duration is set to Long DX3016 Recording Time Tables BasicWithout Audio recording, recording duration is set to Short Audio recording, recording duration is set to Long Audio recording, recording duration is set to Medium Audio recording, recording duration is set to ShortCall OUT Troubleshooting Description of problem Please consult the followingIs the Lock function or the Password Lock function Jpeg SpecificationsPCM Alarm OUT Power onPower OFF Power ON, Power OFF, Alarm IN, Clock ADJ, RECWarranty and Return Information Regulatory Notices