Pelco DX3016-060 Recording indicators Timer REC indicator, DET indicator, PRE Alarm REC indicator

3.Recording indicators

TIMER REC indicator

This light illuminates during timer recording and timer recording standby mode.

The POWER button does not work when the TIMER REC indicator is lit. To turn on the power when the TIMER REC indicator is lit in the standby mode, press the TIMER REC button.

M-DET indicator

The light illuminates whenever the motion detection setting is ON in the Initial Set Up menu. When the setting is ON, the light goes out if you are in a programming menu.

PRE ALARM REC indicator

The light illuminates whenever SHORT, MEDIUM, or LONG is selected in the pre-alarm recording (PRE A-REC) field in the alarm recording and motion detection (A-Rec/M-Det Setting) menu.

4.Multiplexer buttons

Camera number buttons

Buttons 1-9 on DX3009 models Buttons 1-16 on DX3016 models

Press the number of the camera you want to display on the monitor. In addition, these buttons are used to set the password in the Password Lock function.

SPLIT/SEQUENCE button

Press this button to switch between the single-camera, four-camera, and nine-camera displays on DX3009 models and between single-camera, four-camera, nine-camera, and sixteen-camera displays on DX3016 models. Also use to switch sequence func- tions.

ZOOM button

Press this button to display the Zoom Pointer (X) on the monitor. In addition, this but- ton can be used as the number 0 to set the password in the Password Lock function.

ZOOM IN button

Button 4 on DX3009 models Button 1 on DX3016 models

Pressing this button after pressing the ZOOM button enlarges the image in two steps.

ZOOM OUT button

Button 5 on DX3009 models Button 2 on DX3016 models

Pressing this button after pressing the ZOOM IN button reduces the image.

Move buttons

Buttons 6-9 on DX3009 models Buttons 3-6 on DX3016 models

Press these buttons to move the Zoom Pointer to the desired position.

5.REC button

Press this button to begin recording.

6.ARCHIVE button

Press this button to begin making a backup copy of the hard drive. If there is no pe- ripheral recording device connected, this button cannot be used.

7.Jog and shuttle operation

SHUTTLE ring

Use the ring to set various menus and search functions, to adjust the playback speed, and to rewind or forward the image.

JOG dial

Use the dial to set various menus and search functions, and to forward or reverse the image during playback (field-by-field).

8 Pelco Manual C681M-D (2/02)