FRAME-BY-FRAME (STILL FRAME) PLAYBACK
1.Press the PAUSE button during playback. The unit shifts into
2.If the screen shows more than one camera, you can view a
3.Turn the JOG dial in either direction during
Turn the JOG dial one stop to the right to move forward one frame and one stop to the left to move back one frame. Continue turning the JOG dial to the right for forward playback of consecutive frames and to the left for reverse playback of consecutive frames. Stop turning the dial for
The PLAY button lights when moving in the forward direction, and the REV PLAY but- ton lights when moving in the reverse direction.
If you switch directions, the first stop reverses the direction, as indicated by the lights changing on the PLAY and REV PLAY buttons, but the video does not move. When you turn the JOG dial to the next stop, the video moves forward or backward one frame.
4.Press the PAUSE button again to resume playback in the forward or reverse direction, depending on whether the PLAY or REV PLAY button is lit. Or, press the PLAY or REV PLAY button to exit the pause mode and resume playback in the desired direction.
PAUSE PLAYBACK
1.Press the PAUSE button to pause playback.
2.Press the PAUSE button again to resume playback.
REVERSE PLAYBACK
Press the REV PLAY button when the unit is not in operation. The unit begins reverse playback.
On the first reverse playback after the power switch is turned on or after recording, the unit starts by displaying the last recorded image.
ADJUSTING PLAYBACK SPEED
The SHUTTLE ring can be used to adjust the playback speed. Playback speed will vary ac- cording to how far the SHUTTLE ring is turned.
01139
Regular Playback Mode
1.Turn the SHUTTLE ring to the desired playback speed while the recorder is in play- back or reverse playback.
When playing back images recorded at different recording intervals, there may be rare occasions when the playback speed differs from the original recording rate.
2.The unit shifts to regular playback mode when the SHUTTLE ring is returned to the center position.
62 | Pelco Manual |