Pelco DX3016-120 Mode indicators Access indicator, Lock indicator, Menu buttons, Info button

Page 10

8.Mode indicators

ACCESS indicator

This light flashes when the hard disk drive or peripheral recording devices are being accessed.

LOCK indicator

This light illuminates when the LOCK button is set to ON.

9.Menu buttons

Press one of the buttons to display each menu. Press again to exit the menu.

INFO button

Press this button to display the Information menu.

SET UP button

Press this button to display the Menu Setting menu.

COPY button

Press this button to display the Copy Selection menu. This button works only if a pe- ripheral device is connected to SCSI ID 4 and SCSI ID 5.

SEARCH button

Press this button to display the Search Selection menu.

COPY indicator

This indicator blinks during a copy or restore operation and illuminates during copying.

10.WARNING RESET button

Press this button to clear a warning displayed on the monitor.

This button also clears the “X” that appears on the monitor after a power failure.

11.PLAY DEVICE button

Press this button to select a playback device. If there is no peripheral recording device connected, this button cannot be selected.

EJECT button

Press this button to eject the medium in the playback device. If there is no peripheral recording device connected, this button cannot be used.

12.Play device indicators

The illuminated light indicates the device selected by the PLAY DEVICE button.

13.STOP button

Press this button to stop recording or playback. To stop a timer recording, press the TIMER REC button.

14.PAUSE button

When pressed during recording, the recording pauses. Press again to resume record- ing. When pressed during playback, a still picture is displayed.

SHUTTLE HOLD button

This button retains the selected playback or reverse playback speed.

15.REV PLAY button

Press this button to begin reverse playback.

16.PLAY MODE buttons

These buttons switch the playback interval while in still mode and playback.

17.PLAY button

Press this button to begin playback.

Pelco Manual C681M-D (2/02)

9

Image 10

Contents Password Error Entering Initial PasswordChanging Password Turning Password Lock On and OffUL Listed Contents Using the Copy Button Changing Playback Interval Fast FORWARD/REWIND SearchingList of Illustrations Important Safeguards and Warnings Description Overview GB PER Unit Models Power buttonTimer REC button Front Panel ControlsPRE Alarm REC indicator Recording indicators Timer REC indicatorDET indicator Multiplexer buttons Camera number buttonsSET UP button Mode indicators Access indicatorLock indicator Copy indicatorRear Panel Connectors Alarm in terminals AC power socketRS-232C connector Power on terminalInstallation Camera #1Schematics for Alarm Input and Output Terminals Schematics for Input and Output Terminals HDD DVD-RAMIomega Z250S Adding or Removing a Copy or Archive Device Adding a Hard DrivesRemoving a Hard Drives BOOT-UP DelayConfirming That a Device is Connected SET UP ProgrammingMenu Tree, DX3009 Models Pelco Manual C681M-D 2/02 Menu Tree, DX3016 Models Menu Tree, DX3016 Models Pelco Manual C681M-D 2/02 Maximum Recording Fields Alarms Image QualityBASIC, STANDARD, MEDIUM, HIGH, Superior Define Group Setting Alarm Recording Duration Record AlarmALL, SEP PRE-ALARM RecordingOFF, SHORT, MEDIUM, Long Archive Pointer Reset DET SettingArchive Data Overwrite Audio Recording Auto EjectBuzzer KEY, WRNG, REMAIN, OFFCall OUT Capacity RemainingData Clear Erase Selection HDD, ARC, NoneFIFO/OVERWRITE Mode DX3016 Models Only Backup Following a Power FailureHard Disk Drive HDD Full IM-CHECK Mode Hard Disk Drive HDD Repeat PlaybackMode OUT Initialize MenusREC, PLAY, POWER, Remain Motion DetectionLOW, LOWER, HIGHER, HIGH, MED Multiplexer Display Four-Camera Split 4 Setting Screen Switch Pattern DX3016 Models OnlySplit 4 Screen Setting DX3016 Models Only Split 9 Screen Setting DX3016 Models OnlySplit 16 Screen Setting DX3016 Models Only Sequence Channel Title Displaying Camera Title and/or NumberAlarm Display NONE, TITLE, CH. noCamera Title Power FailureRecord Image Quality Maximum Recording Fields Select Recording Mode Define GroupRS-232C Communication Saving Menu Data Saving Menu SettingsRestoring Menu Data TCP/IP Setting DX3016 Models Only Time and Date Display Display ModeCharacter Size Clock Location Time and Date SettingTitle Timer Recording C, SKIP, ARC, Power Repeat steps 8-10 for the ending timeSetting for the prioritized Program #2 Motion Detection During a Timer Recording DX3016 Models Only Estimating Recording Time Operation SATDX3009 Models Viewing CamerasSPLIT/SEQUENCE Button DX3009 Models Nine camerasRemote Viewing Zoom ButtonsRecording Basic Recording Alarm Recording Timer Recording in the Programming section Playback Basic PlaybackFRAME-BY-FRAME Still Frame Playback Adjusting Playback SpeedRegular Playback Mode Pause PlaybackFast FORWARD/REWIND Changing Playback IntervalSearching Index Search Skip Search Alarm List Search Jump to Starting PointPlayback on Another Device Using the Archive ButtonBacking UP Data Auto-Eject at the Completion of Backup Using the Copy ButtonSimultaneous Recording and Backup Still-Frame Playback Copy ModeDX3016 Models Restoring Data from a Backup Device Power Failure List Information Elapsed Time DisplayRecorded Period ResetScsi Devices Connected Without Audio recording DX3009 Recording Time TablesAudio recording time table Audio recordingDX3009 Recording Time Tables Audio recording, Pre-Alarm Recording duration is set to Long DX3016 Recording Time Tables BasicWithout Audio recording, recording duration is set to Short Audio recording, recording duration is set to LongAudio recording, recording duration is set to Medium Audio recording, recording duration is set to ShortCall OUT Troubleshooting Description of problem Please consult the followingIs the Lock function or the Password Lock function Jpeg SpecificationsPCM Alarm OUT Power onPower OFF Power ON, Power OFF, Alarm IN, Clock ADJ, RECWarranty and Return Information Regulatory Notices