Pelco DX3016-060 Power on, Power OFF, Clock ADJ, Rec, Gnd, Alarm OUT, DC 5V OUT, Call OUT Ground

Inputs/Outputs
POWER ON:	Input for power ON. Low input state is power off; high input
	state is power on.
POWER OFF:	Input for power OFF. Low input state is power off.
ALARM IN (1-9):	Inputs for starting alarm recording. Active: When terminals
	are short-circuited or “Low” Level voltage is applied.
	Non active: Open.
CLOCK ADJ:	Input for adjusting clock. Active: When terminals are short-
	circuited or “Low” Level voltage is applied. Non active: Open.
REC:	Input to start recording. Active: When terminals are short-
	circuited or “Low” Level voltage is applied. Non active: Open.
GND:	Ground.
ALARM OUT:	Output for use while alarm recording is under way.
	Active: “Low” Level. Maximum drive current: 7 mA DC.
MODE OUT:	Output for indication of selected recording mode.
	Non-active: Open. Maximum voltage: +24V DC.
DC 5V OUT:	Output for DC 5V OUT.
CALL OUT:	Output for external warning device. Active: ON. Maximum
	drive current: 7 mA DC.
CALL OUT GROUND:	Ground for external warning device. Non active: Open.
	Maximum voltage: +24VDC.
GENERAL
Operating Temperature:	41° to 104°F (5° to 40°C).
Relative Humidity:	Maximum 80%
Dimensions:	16.7 (W) x 15.0 (D) x 4.45 (H) inches
	(42.5 x 38.0 x 11.3 cm)
Unit Weight
DX3009 models:	15.7 lb (7.1 kg)
DX3016 models:	17.9 lb (8.1 kg)
Connectors
Push-in terminal:	POWER ON, POWER OFF, ALARM IN, CLOCK ADJ, REC
	inputs
	Ground, CALL OUT ground
	ALARM OUT, MODE OUT, DC 5V OUT, CALL OUT outputs
BNC:	Video input/output
SVHS:	Video output
DB9:	RS-232C for connection with personal computer
50-pin D-type:	SCSI

(Design and product specifications subject to change without notice.)

Pelco Manual C681M-D (2/02) 83