Pelco DX3016-120, DX3016-060, DX3009-060 manual Operation, Sat

OPERATION

Press the POWER button on the front of the recorder to turn on the unit. Video from all nine cameras appears on the monitor.

The time and date display may appear on the screen, depending on the setting of the Dis- play Mode in the Time Date Display menu (refer to Time and Date Display in the Program- ming section). The different types of displays are shown below.

Display Mode Display Sample

1	Date, present time, and camera	06-09-2000 11:39:10	C1
	number
2	Date, day of the week, present time,
	recording interval, and camera	06-09-2000 FRI
		11:39:10 12.5F	C1
	number
	Date, day of the week, present time,
3		06-09-2000 FRI
	Recording interval, recording capacity
		11:39:10 12.5F% 99C1
	of HDD, and camera number
	No indication
4	(When alarm signal is input, date, day of
	the week, present time, and recording
	interval will be displayed.)

No indication

5(When warning signal is received, warning indicator will be displayed.)

6

No indication

Display modes 2 to 5 are only available when single screen is displayed or

CH. TITLE is set to NONE in the MPX Display menu. 01135

Below is a description of the time and date display when the display mode is set to 3.

			Day of
Month Date Year			the week	Alarm recording number
01	- 01 - 2000		SAT	A0001
00 : 00 : 00		15F		50% C1

Time Second

Minute

Camera number Recorded capacity of the Hard Disk

Recording interval

Non-operation camera mark

The camera number does not appear if CH. TITLE is set to NONE in the MPX Display menu.

The alarm recording number is displayed during alarm recording.

If you select a camera that is not programmed to be recorded, an icon appears showing a camera with a line through it. Cameras are programmed in the Define Group Setting menu (refer to Record in the Programming section).

The amount of space used in the hard drive is displayed during recording. When recording is stopped, this figure is not displayed. (It remains displayed during pause.) When recording is started again, this figure reappears after a few moments. The % symbol will flash when the designated amount of space remaining on the storage medium has been reached (refer to Capacity Remaining in the Programming section). The % symbol will flash only when one camera is displayed on the monitor, not when multiple cameras are being shown.

The recorder can display dates from January 1, 2000 to December 31, 2030. It also has a built-in function to calculate leap years automatically. After December 31, 2030, the date in- dicator will return to 2000.

The on-screen clock can be reset to the nearest hour by applying a signal to the CLOCK ADJ terminal. For example, if the current time is 11:29:59, it will be reset to 11:00:00, and if the current time is 11:30:00, it will be reset to 12:00:00.

Pelco Manual C681M-D (2/02) 57