Memorex MVT2197 Manual Clock Setting TV Operation, VHF/UHF/CATV Channels, To Select Catv Channels

NOTES: •

MANUAL CLOCK SETTING

TV OPERATION

You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly.

EXAMPLE: Setting the clock to “8:30 AM”, 26th (SAT) October, 2002.

1To turn on the TV/VCR, press the POWER button.

2Adjust the volume level by pressing the VOLUME Up or Down

button. The volume level will be indicated on the screen by green

ENGLISH

1Press the MENU button.

Press the SET/TRACKING + or – button to select the SYSTEM SET-UP option, then press the ENTER button.

2Press the SET/TRACKING + or – button to select the CLOCK SET option, then press the ENTER button.

M E N U

TIMER REC SET

TV SET-UP

CH SET-UP

AUTO REPEAT ON OFF SYSTEM SET-UP

〈+/–/ENTER/MENU〉

SYSTEM SET-UP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

AUTO CLOCK ON OFF

STANDARD TIME DAYLIGHT SAVING TIME

bars. As the volume levelVOLUME 32 increases, so do the number of

bars. If the volume decreases, the number of green bars also decreases.

3Set the TV/CATV menu option to the appropriate position (See page 15).

TV	- VHF/UHF Channels
CATV	- CABLE TV Channels

VHF/UHF/CATV CHANNELS

3 Press the SET/TRACKING + or –	〈 +/–/ENTER/MENU〉
button to set the month, then press	·CLOCK SET
the ENTER button.	MONTH	10
4 Set the day, year and time as in	DAY	1	(SUN)
	YEAR	2000
	TIME	12	: 00 AM
step 3.	+/–/ENTER/CANCEL/MENUÒ
After setting the clock, time and date,	·CLOCK SET
the time starts functioning automati-
cally.	MONTH	10
	DAY	26	(SAT)
	YEAR	2002
	TIME	8	: 30 AM

+/–/ENTER/CANCEL/MENUÒ

8:30 AM FRI

NOTES: • After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the present time again if the Auto Clock did not set correctly.

•To move cursor backward, press the CANCEL button.

TV	CATV
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36		(A) (W)
	37-59 (AA) (WW)
	60-85	(AAA) (ZZZ)
	86-94		(86) (94)
	95-99	(A-5) (A-1)
	100-125		(100)(125)
	01		(5A)

4Press the Direct Channel selection buttons to select the channel.

•TV mode direct channel selection

When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons (for example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order.

•CATV mode direct channel selection

When the TV/CATV menu option is in the CATV position, channels can be selected as follows:

•TO SELECT CATV CHANNELS:

1-9 Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002".

10-12 Press "0", then the remaining 2 digits. Example, to select channel 12, press "012".

13-99 Press the 2 digits in order.

Example, to select channel 36, press "36". 100-125 Press the 3 digits in order.

Example, to select channel 120, press "120".

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

CH 012

If a channel with no broadcast is selected, the sound will automatically be muted.

• If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

13

5A42201A E P12-19 13 17/4/2002, 13:31