Sony TA-VE700 manual Troubleshooting, 17EN, Additional Information

Page 17

 

 

 

 

Additional Information

Additional Information

 

 

 

Troubleshooting

If you experience any of the following difficulties while using the amplifier, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

There’s no sound or only a very low-level sound is heard.

/Check that the speakers and components are connected securely.

/Make sure you select the correct component on the amplifier.

/Make sure you set the SPEAKERS selector correctly.

/Press MUTING on the remote if MUTING is shown in the display.

/The protective device on the amplifier has been activated because of a short circuit. (“PROTECTOR” flashes.) Turn off the amplifier, eliminate the short-circuit problem and turn on the power again.

The left and right sounds are unbalanced or reversed.

/Check that the speakers and components are connected correctly and securely.

/Adjust the BALANCE control.

Severe hum or noise is heard.

/Check that the speakers and components are connected securely.

/Check that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light.

/Place your TV away from the audio components.

/The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

No sound is heard from the centre speaker.

/Select a PRO LOGIC or MOVIE (except Mono movie) sound field (see page 11).

/Select the appropriate centre mode (see page 13).

/Adjust the speaker volume appropriately (see page 14).

Recording cannot be made.

/Check that the components are connected correctly.

/Select the source component with the function buttons.

No sound or only a very low-level sound is heard from the rear speakers.

/Turn on the sound field function.

/Select the appropriate centre mode (see page 13).

/Adjust the speaker volume appropriately (see page 14).

/Make sure you turned on the sound field function.

Surround effect cannot be obtained.

/Turn on the sound field function.

/Make sure that the SPEAKERS selector is set to A+B when you use two sets of front speakers.

No picture or an unclear picture is seen on the TV screen.

/Select the appropriate function on the amplifier.

/Set your TV to the appropriate input mode (press TV/VIDEO on the remote for Sony TVs).

/Place your TV away from the audio components.

The remote does not function.

/Point the remote at the remote sensor gon the amplifier.

/Remove the obstacles in the path of the remote and the amplifier.

/Replace both batteries in the remote with new ones if they are weak.

/Make sure you select the correct function on the remote.

/Pressing TV CONTROL ON sets the remote to operate the TV only. In this case, press one of the SYSTEM CONTROL/FUNCTION buttons before operating the amplifier (etc.).

17EN

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Integrated AV Amplifier Precautions Table of Contents Hookup Overview UnpackingGetting Started Inserting batteries into the remoteSpeaker System Hookups Audio Component HookupsOverview HookupsSelecting the speaker system TV/VCR HookupsBefore You Use Your Amplifier Connecting the mains leadAC Hookups Selecting a Component Using the remoteAmplifier Operations Watching video programmesIndexing programme sources Recording Using the Sleep Timer10EN Recording on an audio tape or MiniDisc11EN Using Pre-programmed Sound FieldsUsing Surround Sound Taking Advantage of the Sound Fields Adjusting the tone parameterCustomizing Sound Fields 12ENResetting customized sound fields to the factory settings Adjusting surround sound parametersSelecting the centre mode Getting the Most Out of Dolby Pro Logic Surround SoundAdjusting the delay time Adjusting the speaker volumeAdjusting the tone 14ENTo reset the setting to the factory setting Changing the Factory Setting of a Function Button15EN Advanced Remote OperationsIf the Learn indicator flashes rapidly Clearing the programmed signalWhen you programme the recording signal Programming the RemoteAdditional Information Troubleshooting17EN Glossary Specifications18EN Amplifier section19EN Rear Panel Descriptions 20ENRemote Operates Function Button 21ENRemote Button Descriptions Index 22ENPrécautions Au sujet de ce manuel Déballage Mise en place des piles dans la télécommandeDescription des raccordements PréparatifsRaccordement d’enceintes Raccordement de composants audioAperçu RaccordementsSélection du système d’enceintes Raccordement d’un téléviseur/ magnétoscopeBranchement du cordon d’alimentation secteur Avant la mise en service de l’amplificateurRaccordement au courant secteur Sélection d’un composant Utilisation de la télécommandeFonctionnement de l’amplificateur Pour regarder des programmes vidéoIndexation des source de programme 10F EnregistrementEnregistrement sur une cassette audio ou un minidisque Enregistrement sur une cassette vidéoVous pouvez désigner le temps de votre choix Programmation de l’arrêt automatique11F Utilisation des champs sonores Utilisation des champs sonores préréglés12F Personnalisation des champs sonores Pour mieux profiter des champs sonores13F Comment personnaliser les champs sonores?Télécommande Sélection du mode de canal centralPour mieux profiter du son surround Dolby Pro Logic 14F15F Réglage du volume des enceintesRéglage du temps de retard Si vous avez Sélectionnez Pour quePour revenir aux réglages usine Fonctions élaborées pour le contrôle à distanceTouche numérique Pour sélectionner Effacement d’un signal programmé Programmation de la télécommandePour programmer un signal d’enregistrement Si l’indicateur Learn clignote rapidementInformations supplémentaires Guide de dépannage18F 19F SpécificationsGlossaire 20F Nomenclature du panneau arrière 21FCommande Contrôle Fonction Nomenclature de la télécommandeCommande 22F23F Preparativos PrecaucionesDescripción de este manual Descripción general de las conexiones DesembalajeColocación de las pilas en el telemando Antes de comenzarConexión de sistemas de altavoces Conexión de componentes de audioDescripción general ConexionesSelección del sistema de altavoces Conexión de un televisor/ videograbadoraConexión de los cables de alimentación Conexión de CAAntes de utilizar su amplificador Contemplación de programas de vídeo Selección de un componenteOperaciones del amplificador Utilización del telemando 10EGrabación Si ha cometido un errorIndización de nombres de fuentes de programas 11E12E Utilización del temporizador cronodesconectadorGrabación en un cassette de vídeo Usted podrá especificar libremente el tiempoUtilización de campos acústicos 13EPara aprovechar las ventajas de los campos acústicos Personalización de los campos acústicos14E ¿Cómo se pueden personalizar los campos acústicos?15E Disfrute al máximo de sonido Dolby Pro Logic SurroundAjuste de los parámetros del sonido perimétrico Selección del modo central16E Ajuste del volumen de los altavocesAjuste del tiempo de retardo Ajuste del tono17E Cambio del ajuste de fábrica de una tecla de funciónOperaciones remotas avanzadas Tecla numérica ControlaBorrado de señales programadas Programación del telemandoPara programar la señal de grabación Si el indicador Learn parpadea rápidamenteInformación adicional Solución de problemas19E Glosario Especificaciones20E Sección de vídeo21E Descripción del panel posterior 22ETecla del Controla Función Telemando Descripción de las teclas del telemandoÍndice alfabético 24EPrecauções Operações do Amplificador Acerca deste manualUtilização dos campos acústicos Operações avançadas com o telecomandoDescrição das Ligações DesempacotamentoInserção de pilhas no telecomando Medidas preliminaresLigações do Sistema de Altifalantes Ligações de Componentes de ÁudioDescrição geral LigaçõesSelecção do sistema de altifalantes Ligações do Televisor Videogravador Antes de Utilizar o Amplificador Ligações à CALigação do cabo de alimentação CA AtençãoAssistência de programas de vídeo Selecção de um ComponenteOperações do Amplificador Caso queira alterar o ajuste de fábrica de uma tecla Utilização do telecomandoCaso o equipamento componente não se ligue Para desligar os componentesGravação Indexação de fontes de programa11P Gravação em cassetes de áudio ou minidiscos12P Utilização do temporizador desactivadorGravação de cassetes de vídeo Pode-se especificar o horário livrementeUtilização dos campos acústicos 13PPara reproduzir sem efeitos perimétricos Para desligar os campos acústicosPersonalização dos campos acústicos Desfruto das vantagens dos campos acústicos14P Como personalizar os campos acústicos?Ajustamento dos parâmetros de som perimétrico 15PSelecção do modo central Telecomando16P Ajuste do volume dos altifalantesAjuste do tempo de retardo Ajustamento da tonalidade17P Alteração do ajuste de fábrica de uma tecla FunctionOperações avançãdas com o telecomando Opera18P Programação do telecomandoApagamento do sinal programado Para programar o sinal de gravaçãoInformações Adicionais Verificação de Problemas19P 20P EspecificaçõesGlossário 21P Descrição do Painel Posterior 22PTecla no Opera Função 23PDescrição das Teclas do Telecomando Índice Remissivo 24P

TA-VE700 specifications

The Sony TA-VE700 is a versatile and high-performance audio/video receiver that has gained recognition for its outstanding capabilities in home theater systems. Known for its robust build and rich feature set, this receiver is designed to enhance the audio-visual experience for users who demand quality.

One of the main features of the TA-VE700 is its powerful amplifier section. With a total power output of 100 watts per channel across five channels, it delivers dynamic sound that fills the room. The receiver supports various surround sound formats, including Dolby Digital and DTS, providing an immersive audio experience that complements movies and music alike.

The TA-VE700 incorporates a range of connectivity options, making it easy to integrate with various audio and visual sources. It offers multiple inputs for audio and video devices, including RCA, optical, and coaxial connections, ensuring compatibility with modern and legacy equipment. Additionally, it features a built-in radio tuner, allowing users to enjoy their favorite FM and AM stations without the need for an external unit.

In terms of video capabilities, the Sony TA-VE700 supports multiple video formats, making it suitable for different types of displays. It is equipped with S-Video and composite video inputs, ensuring compatibility with older devices while also supporting higher-quality video signals. This flexibility makes it a great choice for users with varied setups.

One notable technological advancement in the TA-VE700 is its sophisticated digital signal processing. This technology allows the receiver to decode complex audio formats accurately, ensuring that users experience every nuance in their favorite films and music genres. The receiver also features an adjustable 5-band equalizer, giving users the ability to tailor the sound output to their specific preferences.

Another characteristic that sets the TA-VE700 apart is its user-friendly interface. The receiver is equipped with an easy-to-read display and intuitive controls, making navigation straightforward. This user-centric design allows both novice and experienced users to set up and customize their audio settings with ease.

Overall, the Sony TA-VE700 stands out as a robust audio/video receiver, offering power, versatility, and advanced technologies. Its combination of features makes it a remarkable choice for home theater enthusiasts looking for a reliable and high-quality audio solution. Whether watching movies, playing video games, or listening to music, the TA-VE700 provides an exceptional audio experience that enhances every moment.
Top Page Image Contents