To listen to or watch | Press |
|
|
Records | PHONO |
|
|
Radio programmes | TUNER |
|
|
Compact Discs (CD) | CD |
|
|
Digital Audio Tapes (DAT) | DAT/MD |
or MiniDiscs (MD) |
|
|
|
Audio tapes | TAPE |
|
|
TV programmes | TV |
|
|
Video tapes | VIDEO 1 (VTR 3*), |
| VIDEO 2 (VTR 1*) or |
| VIDEO 3** (VTR 2*) |
|
|
Laser discs | LD** |
|
|
*Sony VCRs are operated with a VTR 1, 2, or 3 setting that correspond to Beta, 8mm, and VHS respectively.
**VIDEO 3 and LD set the remote to operate the respective Sony video component but do not switch the function of the amplifier.
For example, to watch Sony LD player connected to the TV/LD terminals (as shown on page 7):
Press TV to switch the function, then press LD to set the remote control to operate the LD player.
If you want to change the factory setting of a button
See page 15.
If the component does not turn on
Press the power switch on the component.
2Start playing.
Refer to “Remote Button Descriptions” on page 21 for details.
To turn off the components
Press SYSTEM OFF. This will also turn off the video and audio components connected to the SWITCHED AC OUTLETs on the back of this unit at the same time.
If you use a Sony TV
When you press TV to watch a TV programme, the TV turns on and switches to the TV input. The TV also turns on automatically and switches to the appropriate video input when you press VIDEO 1 or VIDEO 2. If the TV does not switch to the appropriate input automatically, press TV/VIDEO on the remote.
Watching TV without the amplifier (for Sony TVs only)
Press TV CONTROL ON to set the remote to operate TV functions only (see “Remote Button Descriptions” on page 21 for details). When you press this button, the TV turns on and switches to the TV input. If the TV does not automatically switch to the TV input, press TV/
VIDEO.
Note
Some Sony TVs cannot be controlled by this remote.
Amplifier Operations
Indexing programme sources
This feature is useful when, for example, you have more than one VCR: you can label one VCR as “VHS” and label the other as “8MM”. Then, you can have the amplifier display the index names so you can tell which VCR you are using. This feature also comes in handy if you connect a component to jacks designed for another component (for example, connecting a second CD player to the TUNER jacks).
DPC MODE
Digital processing control buttons
1Press the function button you want to label.
2Press DPC MODE repeatedly until the INDEX indicator lights up.
3Create a name by using the digital processing control buttons as follows:
Press or to select a character, and then
press to move the cursor to the next position.
To insert a space, press or until a blank space appears in the display (the space is between “}” and “!”).
The name you created is stored automatically.
If you’ve made a mistake
Press or repeatedly until the character you want to change flashes. Then select the right character.
9EN